countroller.fit

来自「主次干道分别亮59s和11s」· FIT 代码 · 共 152 行

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 05/11/2009 14:43:01      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "countroller"
BEGIN

    DEVICE = "EP1K30QC208-3";

    "Clock"                        : INPUT_PIN  = 79     ;
    "CountNum0"                    : INPUT_PIN  = 183    ;
    "CountNum1"                    : INPUT_PIN  = 8      ;
    "CountNum2"                    : INPUT_PIN  = 7      ;
    "CountNum3"                    : INPUT_PIN  = 9      ;
    "CountNum4"                    : INPUT_PIN  = 78     ;
    "CountNum5"                    : INPUT_PIN  = 80     ;
    "CountNum6"                    : INPUT_PIN  = 184    ;
    "Hold"                         : INPUT_PIN  = 182    ;
    "GreenA"                       : OUTPUT_PIN = 102    ;
    "GreenB"                       : OUTPUT_PIN = 103    ;
    "NumA0"                        : OUTPUT_PIN = 162    ;
    "NumA1"                        : OUTPUT_PIN = 104    ;
    "NumA2"                        : OUTPUT_PIN = 157    ;
    "NumA3"                        : OUTPUT_PIN = 158    ;
    "NumA4"                        : OUTPUT_PIN = 161    ;
    "NumA5"                        : OUTPUT_PIN = 159    ;
    "NumB0"                        : OUTPUT_PIN = 148    ;
    "NumB1"                        : OUTPUT_PIN = 147    ;
    "NumB2"                        : OUTPUT_PIN = 149    ;
    "NumB3"                        : OUTPUT_PIN = 150    ;
    "NumB4"                        : OUTPUT_PIN = 10     ;
    "NumB5"                        : OUTPUT_PIN = 11     ;
    "RedA"                         : OUTPUT_PIN = 167    ;
    "RedB"                         : OUTPUT_PIN = 169    ;
    "YellowA"                      : OUTPUT_PIN = 160    ;
    "YellowB"                      : OUTPUT_PIN = 170    ;
    "|LPM_ADD_SUB:261|addcore:adder|pcarry3" : LOCATION   = LC2_A2 ;
    "|LPM_ADD_SUB:261|addcore:adder|pcarry4" : LOCATION   = LC4_A3 ;
    "|LPM_ADD_SUB:261|addcore:adder|:125" : LOCATION   = LC7_A2 ;
    ":10"                          : LOCATION   = LC3_A4 ;
    ":12"                          : LOCATION   = LC2_A4 ;
    ":14"                          : LOCATION   = LC4_A2 ;
    ":16"                          : LOCATION   = LC1_A1 ;
    ":18"                          : LOCATION   = LC3_A2 ;
    ":20"                          : LOCATION   = LC1_A5 ;
    ":22"                          : LOCATION   = LC7_A7 ;
    ":24"                          : LOCATION   = LC5_A9 ;
    ":26"                          : LOCATION   = LC1_A2 ;
    ":28"                          : LOCATION   = LC3_A1 ;
    ":30"                          : LOCATION   = LC8_A1 ;
    ":32"                          : LOCATION   = LC5_A6 ;
    ":34"                          : LOCATION   = LC1_A8 ;
    ":36"                          : LOCATION   = LC2_A3 ;
    ":38"                          : LOCATION   = LC3_A3 ;
    ":40"                          : LOCATION   = LC1_A10;
    ":42"                          : LOCATION   = LC2_A1 ;
    ":44"                          : LOCATION   = LC1_A11;
    ":148"                         : LOCATION   = LC1_A3 ;
    ":407"                         : LOCATION   = LC4_A4 ;
    ":422"                         : LOCATION   = LC1_A4 ;
    ":434"                         : LOCATION   = LC5_A2 ;
    ":446"                         : LOCATION   = LC4_A1 ;
    ":458"                         : LOCATION   = LC6_A2 ;
    ":600"                         : LOCATION   = LC1_A12;
    ":867"                         : LOCATION   = LC5_A1 ;

END;

INTERNAL_INFO "countroller"
BEGIN
	DEVICE = EP1K30QC208-3;
    OD5P79  : LORAX = "1:FB5->LC3_A4,->LC2_A4,->LC4_A2,->LC1_A1,->LC3_A2,->LC1_A5,->LC7_A7,->LC5_A9,->LC1_A2,->LC3_A1,->LC8_A1,->LC5_A6,->LC1_A8,->LC2_A3,->LC3_A3,->LC1_A10,->LC2_A1,->LC1_A11|";
    OD4P183 : LORAX = "1:FB4|2:CH0R0|3:PA13R0C5->LC5_A6|,3:PA13R0C0->LC3_A1,->LC8_A1,->LC4_A1|,3:PA13R0C1->LC7_A2,->LC6_A2|,3:PA13R0C4->LC1_A5|||";
    OH2R0P8 : LORAX = "1:G58R0|2:PA4R0C0->LC3_A1,->LC8_A1,->LC4_A1|,2:PA4R0C1->LC7_A2,->LC6_A2||";
    OH0R0P7 : LORAX = "1:G55R0|2:PA0R0C0->LC3_A1,->LC4_A1|,2:PA0R0C1->LC7_A2||";
    OH3R0P9 : LORAX = "1:G71R0,PA19R0C1->LC2_A2,->LC1_A2,->LC5_A2|";
    OD2P78  : LORAX = "1:FB2|2:FH2R0|3:PA6R0C8->LC5_A9|,3:PA6R0C6->LC7_A7|,3:PA6R0C2->LC4_A3|,3:PA6R0C3->LC4_A4,->LC1_A4|,3:PA6R0C11->LC1_A12|||";
    OD3P80  : LORAX = "1:FB3|2:FH3R0|3:PA8R0C6->LC7_A7|,3:PA8R0C11->LC1_A12|,3:PA8R0C3->LC4_A4|,3:PA8R0C2->LC2_A3,->LC3_A3,->LC1_A3|||";
    OD0P184 : LORAX = "1:FB0|2:FH0R0|3:PA7R0C9->LC1_A10|,3:PA7R0C7->LC1_A8|,3:PA7R0C8->LC5_A9|,3:PA7R0C6->LC7_A7|,3:PA7R0C5->LC5_A6|,3:PA7R0C10->LC1_A11|,3:PA7R0C1->LC1_A2|,3:PA7R0C0->LC5_A1|,3:PA7R0C2->LC2_A3,->LC3_A3,->LC1_A3|,3:PA7R0C3->LC4_A4,->LC1_A4|||";
    OD1P182 : LORAX = "1:FB1|2:FH1R0|3:PA12R0C7->LC1_A8|,3:PA12R0C0->LC1_A1|,3:PA12R0C1->LC4_A2,->LC3_A2|,3:PA12R0C4->LC1_A5|,3:PA12R0C2->LC2_A3,->LC3_A3|,3:PA12R0C3->LC3_A4,->LC2_A4|||";
    LC2_A2  : LORAX = "1:MSW2R0C0,HHL32R0|2:PA14R0C2->LC4_A3|,2:PA14R0C3->LC4_A4,->LC1_A4|,2:PA14R0C11->LC1_A12||";
    LC3_A4  : LORAX = "1:MSW3R0C2,V9C2->OV0C2P159|";
    LC2_A4  : LORAX = "1:MSW1R0C3,V3C3->OV0C3P161|";
    LC4_A2  : LORAX = "1:MSW3R0C1,V9C1->OV0C1P158|";
    LC1_A1  : LORAX = "1:MSW0R0C0,V0C0->OV0C0P157|";
    LC3_A2  : LORAX = "1:MSW3R0C0,V9C0->OV2C0P104|";
    LC1_A5  : LORAX = "1:MSW0R0C4,V0C4->OV0C4P162|";
    LC7_A7  : LORAX = "1:MSW6R0C6,G128R0->OH6R0P11|";
    LC5_A9  : LORAX = "1:MSW4R0C8,G116R0->OH4R0P10|";
    LC1_A2  : LORAX = "1:MSW0R0C1,HHL13R0->OH8R0P150|";
    LC3_A1  : LORAX = "1:MSW2R0C1,HHL12R0->OH10R0P149|";
    LC8_A1  : LORAX = "1:MSW7R0C0,HHL65R0->OH15R0P147|";
    LC5_A6  : LORAX = "1:MSW5R0C4,HHL69R0->OH13R0P148|";
    LC1_A8  : LORAX = "1:MSW0R0C7,V0C7->OV0C7P167|";
    LC2_A3  : LORAX = "1:MSW1R0C2,V3C2->OV2C2P102|";
    LC3_A3  : LORAX = "1:MSW2R0C3,V6C3->OV1C3P160|";
    LC1_A10 : LORAX = "1:MSW0R0C9,V0C9->OV0C9P169|";
    LC2_A1  : LORAX = "1:MSW1R0C1,V3C1->OV2C1P103|";
    LC1_A11 : LORAX = "1:MSW0R0C10,V0C10->OV0C10P170|";
    LC1_A3  : LORAX = "1:MSW0R0C3,HHL20R0|2:PA10R0C0->LC4_A1|,2:PA10R0C1->LC5_A2,->LC6_A2|,2:PA10R0C4->LC1_A5|,2:PA10R0C3->LC1_A4||";
    LC1_A12 : LORAX = "1:MSW1R0C10,HHL16R0|2:PA5R0C5->LC5_A6|,2:PA5R0C10->LC1_A11|,2:PA5R0C0->LC5_A1|,2:PA5R0C1->LC1_A2||";
	LC2_A2  : LORAX2 = "X, X, OH3R0P9, LC7_A2";
	LC4_A3  : LORAX2 = "X, X, OD2P78, LC2_A2";
	LC7_A2  : LORAX2 = "X, OH0R0P7, OD4P183, OH2R0P8";
	LC3_A4  : LORAX2 = "X, OD1P182, LC4_A4, LC3_A4";
	LC2_A4  : LORAX2 = "X, OD1P182, LC1_A4, LC2_A4";
	LC4_A2  : LORAX2 = "X, OD1P182, LC5_A2, LC4_A2";
	LC1_A1  : LORAX2 = "X, OD1P182, LC4_A1, LC1_A1";
	LC3_A2  : LORAX2 = "X, OD1P182, LC6_A2, LC3_A2";
	LC1_A5  : LORAX2 = "OD1P182, LC1_A3, OD4P183, LC1_A5";
	LC7_A7  : LORAX2 = "X, OD3P80, OD0P184, OD2P78";
	LC5_A9  : LORAX2 = "X, X, OD0P184, OD2P78";
	LC1_A2  : LORAX2 = "OD0P184, OH3R0P9, LC1_A12, LC7_A2";
	LC3_A1  : LORAX2 = "LC5_A1, OH0R0P7, OH2R0P8, OD4P183";
	LC8_A1  : LORAX2 = "X, LC5_A1, OD4P183, OH2R0P8";
	LC5_A6  : LORAX2 = "X, OD0P184, LC1_A12, OD4P183";
	LC1_A8  : LORAX2 = "X, X, OD1P182, OD0P184";
	LC2_A3  : LORAX2 = "OD1P182, OD0P184, OD3P80, LC4_A3";
	LC3_A3  : LORAX2 = "OD1P182, OD3P80, OD0P184, LC4_A3";
	LC1_A10 : LORAX2 = "OD0P184, X, X, X";
	LC2_A1  : LORAX2 = "X, X, X, LC5_A1";
	LC1_A11 : LORAX2 = "X, X, OD0P184, LC1_A12";
	LC1_A3  : LORAX2 = "X, OD0P184, OD3P80, LC4_A3";
	LC4_A4  : LORAX2 = "OD0P184, OD3P80, OD2P78, LC2_A2";
	LC1_A4  : LORAX2 = "OD0P184, OD2P78, LC1_A3, LC2_A2";
	LC5_A2  : LORAX2 = "X, OH3R0P9, LC1_A3, LC7_A2";
	LC4_A1  : LORAX2 = "OH0R0P7, LC1_A3, OH2R0P8, OD4P183";
	LC6_A2  : LORAX2 = "X, OH2R0P8, LC1_A3, OD4P183";
	LC1_A12 : LORAX2 = "X, OD3P80, OD2P78, LC2_A2";
	LC5_A1  : LORAX2 = "X, X, OD0P184, LC1_A12";
END;