counter.fit

来自「主次干道分别亮59s和11s」· FIT 代码 · 共 88 行

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 05/11/2009 14:51:33      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "counter"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "clock"                        : INPUT_PIN  = 39     ;
    "Hold"                         : INPUT_PIN  = 40     ;
    "reset"                        : INPUT_PIN  = 38     ;
    "countNum0"                    : OUTPUT_PIN = 5      ;
    "countNum1"                    : OUTPUT_PIN = 68     ;
    "countNum2"                    : OUTPUT_PIN = 70     ;
    "countNum3"                    : OUTPUT_PIN = 69     ;
    "countNum4"                    : OUTPUT_PIN = 9      ;
    "countNum5"                    : OUTPUT_PIN = 71     ;
    "countNum6"                    : OUTPUT_PIN = 6      ;
    "|LPM_ADD_SUB:160|addcore:adder|:121" : LOCATION   = LC5_A2 ;
    "|LPM_ADD_SUB:160|addcore:adder|:125" : LOCATION   = LC4_A2 ;
    "|LPM_ADD_SUB:160|addcore:adder|:129" : LOCATION   = LC3_A4 ;
    "|LPM_ADD_SUB:160|addcore:adder|:133" : LOCATION   = LC5_A4 ;
    "|LPM_ADD_SUB:160|addcore:adder|:137" : LOCATION   = LC7_A4 ;
    ":4"                           : LOCATION   = LC2_A2 ;
    ":6"                           : LOCATION   = LC1_A4 ;
    ":8"                           : LOCATION   = LC6_A4 ;
    ":10"                          : LOCATION   = LC8_A4 ;
    ":12"                          : LOCATION   = LC3_A2 ;
    ":14"                          : LOCATION   = LC6_A2 ;
    ":16"                          : LOCATION   = LC1_A2 ;
    "~109~1"                       : LOCATION   = LC2_A4 ;
    "~248~1"                       : LOCATION   = LC4_A4 ;

END;

INTERNAL_INFO "counter"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC2_A2,->LC1_A4,->LC6_A4,->LC8_A4,->LC3_A2,->LC6_A2,->LC1_A2|";
    OD3P40  : LORAX = "1:FB3|2:FH3R0|3:PA5R0C1->LC2_A2,->LC3_A2,->LC6_A2,->LC1_A2|,3:PA5R0C3->LC1_A4,->LC6_A4,->LC8_A4,->LC4_A4|||";
    LC4_A2  : LORAX = "1:MSW0R0C0,G39R0,PA11R0C3->LC3_A4,->LC5_A4,->LC7_A4,->LC8_A4,->LC4_A4|";
    LC7_A4  : LORAX = "1:MSW6R0C3,G74R0,PA21R0C1->LC2_A2|";
    OD2P38  : LORAX = "1:FB2->LC2_A2,->LC1_A4,->LC6_A4,->LC8_A4,->LC3_A2,->LC6_A2,->LC1_A2|";
    LC2_A2  : LORAX = "1:MSW1R0C1,G29R0->OH1R0P6,2:PA17R0C3->LC2_A4||";
    LC1_A4  : LORAX = "1:MSW0R0C3,HHL19R0->OH8R0P71|";
    LC6_A4  : LORAX = "1:MSW6R0C2,G87R0->OH6R0P9|";
    LC8_A4  : LORAX = "1:MSW4R0C2,HHL43R0->OH12R0P69|";
    LC3_A2  : LORAX = "1:MSW2R0C1,HHL4R0->OH10R0P70|";
    LC6_A2  : LORAX = "1:MSW6R0C0,HHL29R0->OH14R0P68|";
    LC1_A2  : LORAX = "1:MSW0R0C1,G44R0->OH0R0P5|";
    LC4_A4  : LORAX = "1:MSW0R0C2,G40R0,PA12R0C1->LC2_A2,->LC3_A2,->LC6_A2|";
	LC5_A2  : LORAX2 = "X, X, LC1_A2, LC6_A2";
	LC4_A2  : LORAX2 = "X, LC3_A2, LC1_A2, LC6_A2";
	LC3_A4  : LORAX2 = "X, X, LC4_A2, LC8_A4";
	LC5_A4  : LORAX2 = "X, LC4_A2, LC6_A4, LC8_A4";
	LC7_A4  : LORAX2 = "LC4_A2, LC1_A4, LC6_A4, LC8_A4";
	LC2_A2  : LORAX2 = "OD3P40, LC7_A4, LC4_A4, LC2_A2";
	LC1_A4  : LORAX2 = "OD3P40, LC5_A4, LC4_A4, LC1_A4";
	LC6_A4  : LORAX2 = "OD3P40, LC3_A4, LC4_A4, LC6_A4";
	LC8_A4  : LORAX2 = "OD3P40, LC4_A2, LC4_A4, LC8_A4";
	LC3_A2  : LORAX2 = "OD3P40, LC5_A2, LC4_A4, LC3_A2";
	LC6_A2  : LORAX2 = "OD3P40, LC4_A4, LC6_A2, LC1_A2";
	LC1_A2  : LORAX2 = "X, X, OD3P40, LC1_A2";
	LC2_A4  : LORAX2 = "X, LC6_A4, LC1_A4, LC2_A2";
	LC4_A4  : LORAX2 = "OD3P40, LC2_A4, LC4_A2, LC8_A4";
END;