cic_dec_8_three.v

这是关于智能天线的自适应算法的MATLAB代码

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company: 
// Engineer: 
// 
// Create Date:    15:24:48 09/17/2007 
// Design Name: 
// Module Name:    cic_dec_8_three 
// Project Name: 
// Target Devices: 
// Tool versions: 
// Description: 
//
// Dependencies: 
//
// Revision: 
// Revision 0.01 - File Created
// Additional Comments: 
//
//////////////////////////////////////////////////////////////////////////////////
module cic_dec_8_three(clk, clk1, reset, x_in, y_out);
input clk; // 系统工作时钟
input clk1;
input reset;     //  系统控制信号
input [7:0] x_in;     // 三级CIC滤波器输入信号
output [7:0] y_out;   // 三级CIC滤波器输出信号

reg [7:0] y_out;   // 将输出设置成寄存器行
reg [15:0] i1, i2, i3, c1, c2, c3;  // 用于移位的寄存器
reg [7:0] int_out1, int_out2, int_out3, comb_out1, comb_out2;

// 3级积分滤波器的级联
always @(posedge clk) begin
    if(reset) begin     //初始化中间变量
      i1 <=0;
      i2 <=0;
      i3 <=0;
      int_out1 <=0;
      int_out2 <=0;
      int_out3 <=0;
    end
    else
      i1 <= {i1[7:0], x_in};
      i2 <= {i2[7:0], int_out1};
      i3 <= {i3[7:0], int_out2};
      int_out1 <= i1[7:0] + i1[15:8];
      int_out2 <= i2[7:0] + i2[15:8];
      int_out3 <= i3[7:0] + i3[15:8];
end      

// 3级梳状滤波器的级联
always @(posedge clk1) begin
   if(!reset) begin //初始化中间变量
      c1 <= 0;
      c2 <= 0;
      c3 <= 0;
      comb_out1 <= 0;
      comb_out2 <= 0;
      y_out <= 0;
	end
	else begin
      c1 <= {c1[7:0], int_out3};
      c2 <= {c2[7:0], comb_out1};
      c3 <= {c3[7:0], comb_out2};
      comb_out1 <= c1[7:0] - c1[15:8];
      comb_out2 <= c2[7:0] - c2[15:8];
      y_out <= c3[7:0] - c3[15:8];
	end
end      

endmodule