anx9813_opt.bak

display port接受芯片ANX9813的驱动代码。MCU使用LPC936FDH,内部包含AN9813寄存器设置

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,2,0,0,0,0,0,<.\START900.A51><START900.A51> 
OPTFFF 1,2,1,0,0,0,0,0,<.\DP_RX_API.c><DP_RX_API.c> 
OPTFFF 1,3,1,0,0,0,0,0,<.\DP_RX_DRV.c><DP_RX_DRV.c> 
OPTFFF 1,4,1,0,0,0,0,0,<.\i2c_intf.c><i2c_intf.c> 
OPTFFF 1,5,1,184549378,0,73,93,0,<.\main.c><main.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,154,0,0,0,203,0,0,0,156,4,0,0,174,2,0,0 }
OPTFFF 1,6,1,285212673,0,25,46,0,<.\mcu.c><mcu.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,88,0,0,0,116,0,0,0,230,3,0,0,88,2,0,0 }
OPTFFF 1,7,1,0,0,0,0,0,<.\timer.c><timer.c> 
OPTFFF 1,8,1,0,0,0,0,0,<.\uart_int.c><uart_int.c> 

ExtF <.\MCU.H> 59,59,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,176,0,0,0,232,0,0,0,182,4,0,0,204,2,0,0 }

TARGOPT 1, (Target 1)
 CLK51=12000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,1,1,1,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 1,(80C51 Family Programmer's Guide)<DATASHTS\PHILIPS\P51_PG.PDF>
  OPTBL 2,(Data Sheet)<DATASHTS\PHILIPS\P89LPC932_DS.PDF>
  OPTBL 3,(User's Manual)<DATASHTS\PHILIPS\P89LPC932_UM.PDF>
  OPTDL (S8051.DLL)()(DLPC.DLL)(-pLPC932)(S8051.DLL)()(TLPC.DLL)(-pLPC932)
  OPTDBG 48125,0,()()()()()()()()()() (BIN\MON51.DLL)()()()
  OPTDF 0x40000002
  OPTLE <>
  OPTLC <>
EndOpt