tb_test_cmp.v

DDR2源代码 DDR2源代码 DDR2源代码

//*****************************************************************************
// DISCLAIMER OF LIABILITY
// 
// This text/file contains proprietary, confidential
// information of Xilinx, Inc., is distributed under license
// from Xilinx, Inc., and may be used, copied and/or
// disclosed only pursuant to the terms of a valid license
// agreement with Xilinx, Inc. Xilinx hereby grants you a 
// license to use this text/file solely for design, simulation, 
// implementation and creation of design files limited 
// to Xilinx devices or technologies. Use with non-Xilinx 
// devices or technologies is expressly prohibited and 
// immediately terminates your license unless covered by
// a separate agreement.
//
// Xilinx is providing this design, code, or information 
// "as-is" solely for use in developing programs and 
// solutions for Xilinx devices, with no obligation on the 
// part of Xilinx to provide support. By providing this design, 
// code, or information as one possible implementation of 
// this feature, application or standard, Xilinx is making no 
// representation that this implementation is free from any 
// claims of infringement. You are responsible for 
// obtaining any rights you may require for your implementation. 
// Xilinx expressly disclaims any warranty whatsoever with 
// respect to the adequacy of the implementation, including 
// but not limited to any warranties or representations that this
// implementation is free from claims of infringement, implied 
// warranties of merchantability or fitness for a particular 
// purpose.
//
// Xilinx products are not intended for use in life support
// appliances, devices, or systems. Use in such applications is
// expressly prohibited.
//
// Any modifications that are made to the Source Code are 
// done at the user抯 sole risk and will be unsupported.
//
// Copyright (c) 2006-2007 Xilinx, Inc. All rights reserved.
//
// This copyright and support notice must be retained as part 
// of this text at all times. 
//*****************************************************************************
//   ____  ____
//  /   /\/   /
// /___/  \  /    Vendor: Xilinx
// \   \   \/     Version: 2.1
//  \   \         Application: MIG
//  /   /         Filename: tb_test_cmp.v
// /___/   /\     Date Last Modified: $Date: 2007/11/28 13:20:56 $
// \   \  /  \    Date Created: Fri Sep 01 2006
//  \___\/\___\
//
//Device: Virtex-5
//Design Name: DDR2
//Purpose:
//   This module generates the error signal in case of bit errors. It compares
//   the read data with expected data value.
//Reference:
//Revision History:
//*****************************************************************************

`timescale 1ns/1ps

module tb_test_cmp #
  (
   // Following parameters are for 72-bit RDIMM design (for ML561 Reference 
   // board design). Actual values may be different. Actual parameters values 
   // are passed from design top module ddr2_sdram module. Please refer to
   // the ddr2_sdram module for actual values.
   parameter DQ_WIDTH      = 72,
   parameter APPDATA_WIDTH = 144,
   parameter ECC_ENABLE    = 0
   )
  (
   input                     clk,
   input                     rst,
   input                     phy_init_done,
   input                     rd_data_valid,
   input [APPDATA_WIDTH-1:0] app_cmp_data,
   input [APPDATA_WIDTH-1:0] rd_data_fifo_in,
   output reg                error,
   output reg                error_cmp
   );

  wire [(APPDATA_WIDTH/16)-1:0] byte_err_fall;
  reg [(APPDATA_WIDTH/16)-1:0]  byte_err_fall_r;
  wire [(APPDATA_WIDTH/16)-1:0] byte_err_rise;
  reg [(APPDATA_WIDTH/16)-1:0]  byte_err_rise_r;
  wire [(APPDATA_WIDTH/2)-1:0]  cmp_data_fall;
  wire [(APPDATA_WIDTH/2)-1:0]  cmp_data_rise;
  wire [APPDATA_WIDTH-1:0]      cmp_data_r;
  reg  [APPDATA_WIDTH-1:0]      cmp_data_r1;
  reg                           cmp_start;
  wire [(APPDATA_WIDTH/2)-1:0]  data_fall_r;
  wire [(APPDATA_WIDTH/2)-1:0]  data_rise_r;
  reg                           err_fall;
  reg                           err_rise;
  reg                           error_tmp_r;
  wire                          error_tmp_r1;
  wire                          error_tmp_r2;
  wire [APPDATA_WIDTH-1:0]      rd_data_r;
  wire [APPDATA_WIDTH-1:0]      rd_data_r1;
  reg [APPDATA_WIDTH-1:0]       rd_data_r2;
  wire                          rd_data_valid_r;
  reg                           rd_data_valid_r1;
  reg                           rd_data_valid_r2;
  reg                           rst_r
                                /* synthesis syn_preserve = 1 */;
  reg                           rst_r1
                                /* synthesis syn_maxfan = 10 */;

  // XST attributes for local reset "tree"
  // synthesis attribute shreg_extract of rst_r is "no";
  // synthesis attribute shreg_extract of rst_r1 is "no";
  // synthesis attribute equivalent_register_removal of rst_r is "no"

  //***************************************************************************

  // local reset "tree" for controller logic only. Create this to ease timing
  // on reset path. Prohibit equivalent register removal on RST_R to prevent
  // "sharing" with other local reset trees (caution: make sure global fanout
  // limit is set to larger than fanout on RST_R, otherwise SLICES will be
  // used for fanout control on RST_R.
  always @(posedge clk) begin
    rst_r  <= rst;
    rst_r1 <= rst_r;
  end

  // instantiate discrete flops for better timing
  genvar rd_data_i;
  generate
    for (rd_data_i = 0; rd_data_i < APPDATA_WIDTH;
         rd_data_i = rd_data_i + 1) begin: gen_rd_data
      FD ff_rd_data
        (
         .Q  (rd_data_r[rd_data_i]),
         .C  (clk),
         .D  (rd_data_fifo_in[rd_data_i])
         );

      FD ff_rd_data_r1
        (
         .Q  (rd_data_r1[rd_data_i]),
         .C  (clk),
         .D  (rd_data_r[rd_data_i])
         );
    end
  endgenerate

  genvar cmp_data_i;
  generate
    for (cmp_data_i = 0; cmp_data_i < APPDATA_WIDTH;
         cmp_data_i = cmp_data_i + 1) begin: gen_cmp_data
        FD ff_cmp_data
          (
           .Q  (cmp_data_r[cmp_data_i]),
           .C  (clk),
           .D  (app_cmp_data[cmp_data_i])
           );
    end
  endgenerate

  assign data_fall_r   = rd_data_r2[APPDATA_WIDTH-1:(APPDATA_WIDTH/2)];
  assign data_rise_r   = rd_data_r2[(APPDATA_WIDTH/2)-1:0];
  assign cmp_data_fall = cmp_data_r[APPDATA_WIDTH-1:(APPDATA_WIDTH/2)];
  assign cmp_data_rise = cmp_data_r[(APPDATA_WIDTH/2)-1:0];

  // Instantiate ff for timing.
  FD ff_rd_data_valid_r
    (
     .Q  (rd_data_valid_r),
     .C  (clk),
     .D  (rd_data_valid)
     );

  always @(posedge clk) begin
    if (rst_r1) begin
      rd_data_valid_r1 <= 1'd0;
    end else begin
      rd_data_valid_r1 <= rd_data_valid_r & phy_init_done;
    end
  end

  always @(posedge clk)begin
     rd_data_r2 <= rd_data_r1;
     cmp_data_r1 <= cmp_data_r;
     rd_data_valid_r2 <= rd_data_valid_r1;
  end

  genvar cmp_i;
  generate
    for (cmp_i = 0; cmp_i < APPDATA_WIDTH/16; cmp_i = cmp_i + 1) begin: gen_cmp
      assign byte_err_fall[cmp_i]
               = (rd_data_valid_r2 &&
                  (data_fall_r[8*(cmp_i+1)-1:8*cmp_i] !=
                   cmp_data_fall[8*(cmp_i+1)-1:8*cmp_i]));
      assign byte_err_rise[cmp_i]
               = (rd_data_valid_r2 &&
                  (data_rise_r[8*(cmp_i+1)-1:8*cmp_i] !=
                   cmp_data_rise[8*(cmp_i+1)-1:8*cmp_i]));
    end
  endgenerate

  always @(posedge clk) begin
    byte_err_rise_r  <= byte_err_rise;
    byte_err_fall_r  <= byte_err_fall;
  end

  always @(posedge clk)
    if (rst_r1) begin
      err_rise    <= 1'bx;
      err_fall    <= 1'bx;
      cmp_start   <= 1'b0;
      error_tmp_r <= 1'b0;
    end else begin
      err_rise <= | byte_err_rise_r;
      err_fall <= | byte_err_fall_r;
      // start comparing when initialization/calibration complete, and we
      // get first valid readback
      if (rd_data_valid_r2)
        cmp_start <= 1'b1;
      if (cmp_start && !error_tmp_r)
        error_tmp_r <= err_rise | err_fall;
      //synthesis translate_off
      if ((err_rise || err_fall) && cmp_start)
        $display ("ERROR at time %t" , $time);
      //synthesis translate_on
    end

  // FF inst to force synthesis to infer ff's.
  // Done for timing.
  FD ff_error_1
    (
     .Q  (error_tmp_r1),
     .C  (clk),
     .D  (error_tmp_r)
     );

  FD ff_error_2
    (
     .Q  (error_tmp_r2),
     .C  (clk),
     .D  (error_tmp_r1)
     );

  always @(posedge clk) begin
    error     <= error_tmp_r2;
    error_cmp <= err_rise | err_fall;
  end

endmodule