stm8s207r.h

按键是比较复杂。可以用状态机表示。 每10mS执行一次键盘扫描任务 0、无键

/* STM8S207R.h */

/* Copyright (c) 2003-2008 STMicroelectronics */

#ifndef __STM8S207R__
#define __STM8S207R__

/* STM8S207R */

	/* Check MCU name */
	#ifdef MCU_NAME
		#define STM8S207R 1
		#if (MCU_NAME != STM8S207R)
		#error "wrong include file STM8S207R.h for chosen MCU!"
		#endif
	#endif

	#define STVD7_EXTERN
	#ifdef __HIWARE__
	/* Required to avoid errors at link time, as the Metrowerks compiler   */
	/* prohibits multiple definitions of the same variable.                */
	/* In order to define once the registers, add                          */
	/* "#define __DEFINE_REGISTERS_STVD7_INCLUDE__"                        */
	/* before including this file in one of your application files.        */
		#ifndef __DEFINE_REGISTERS_STVD7_INCLUDE__
		#undef STVD7_EXTERN
		#define STVD7_EXTERN extern
		#endif
	#endif

	#ifdef __CSMC__
		#define DEF_8BIT_REG_AT(NAME,ADDRESS) volatile unsigned char NAME @ADDRESS
		#define DEF_16BIT_REG_AT(NAME,ADDRESS) volatile unsigned int NAME @ADDRESS
	#endif

	#ifdef __HIWARE__
		#define DEF_8BIT_REG_AT(NAME,ADDRESS) STVD7_EXTERN volatile unsigned char NAME @ADDRESS
		#define DEF_16BIT_REG_AT(NAME,ADDRESS) STVD7_EXTERN volatile unsigned int NAME @ADDRESS
	#endif

	#ifdef __RAISONANCE__
		#define DEF_8BIT_REG_AT(NAME,ADDRESS) at ADDRESS hreg NAME
		#define DEF_16BIT_REG_AT(NAME,ADDRESS) at ADDRESS hreg16 NAME
	#endif

/* Port A */
/*****************************************************************/

/* Port A data output latch register */
DEF_8BIT_REG_AT(PA_ODR,0x5000);

/* Port A input pin value register */
DEF_8BIT_REG_AT(PA_IDR,0x5001);

/* Port A data direction register */
DEF_8BIT_REG_AT(PA_DDR,0x5002);

/* Port A control register 1 */
DEF_8BIT_REG_AT(PA_CR1,0x5003);

/* Port A control register 2 */
DEF_8BIT_REG_AT(PA_CR2,0x5004);

/* Port B */
/*****************************************************************/

/* Port B data output latch register */
DEF_8BIT_REG_AT(PB_ODR,0x5005);

/* Port B input pin value register */
DEF_8BIT_REG_AT(PB_IDR,0x5006);

/* Port B data direction register */
DEF_8BIT_REG_AT(PB_DDR,0x5007);

/* Port B control register 1 */
DEF_8BIT_REG_AT(PB_CR1,0x5008);

/* Port B control register 2 */
DEF_8BIT_REG_AT(PB_CR2,0x5009);

/* Port C */
/*****************************************************************/

/* Port C data output latch register */
DEF_8BIT_REG_AT(PC_ODR,0x500a);

/* Port C input pin value register */
DEF_8BIT_REG_AT(PC_IDR,0x500b);

/* Port C data direction register */
DEF_8BIT_REG_AT(PC_DDR,0x500c);

/* Port C control register 1 */
DEF_8BIT_REG_AT(PC_CR1,0x500d);

/* Port C control register 2 */
DEF_8BIT_REG_AT(PC_CR2,0x500e);

/* Port D */
/*****************************************************************/

/* Port D data output latch register */
DEF_8BIT_REG_AT(PD_ODR,0x500f);

/* Port D input pin value register */
DEF_8BIT_REG_AT(PD_IDR,0x5010);

/* Port D data direction register */
DEF_8BIT_REG_AT(PD_DDR,0x5011);

/* Port D control register 1 */
DEF_8BIT_REG_AT(PD_CR1,0x5012);

/* Port D control register 2 */
DEF_8BIT_REG_AT(PD_CR2,0x5013);

/* Port E */
/*****************************************************************/

/* Port E data output latch register */
DEF_8BIT_REG_AT(PE_ODR,0x5014);

/* Port E input pin value register */
DEF_8BIT_REG_AT(PE_IDR,0x5015);

/* Port E data direction register */
DEF_8BIT_REG_AT(PE_DDR,0x5016);

/* Port E control register 1 */
DEF_8BIT_REG_AT(PE_CR1,0x5017);

/* Port E control register 2 */
DEF_8BIT_REG_AT(PE_CR2,0x5018);

/* Port F */
/*****************************************************************/

/* Port F data output latch register */
DEF_8BIT_REG_AT(PF_ODR,0x5019);

/* Port F input pin value register */
DEF_8BIT_REG_AT(PF_IDR,0x501a);

/* Port F data direction register */
DEF_8BIT_REG_AT(PF_DDR,0x501b);

/* Port F control register 1 */
DEF_8BIT_REG_AT(PF_CR1,0x501c);

/* Port F control register 2 */
DEF_8BIT_REG_AT(PF_CR2,0x501d);

/* Port G */
/*****************************************************************/

/* Port G data output latch register */
DEF_8BIT_REG_AT(PG_ODR,0x501e);

/* Port G input pin value register */
DEF_8BIT_REG_AT(PG_IDR,0x501f);

/* Port G data direction register */
DEF_8BIT_REG_AT(PG_DDR,0x5020);

/* Port G control register 1 */
DEF_8BIT_REG_AT(PG_CR1,0x5021);

/* Port G control register 2 */
DEF_8BIT_REG_AT(PG_CR2,0x5022);

/* Port I */
/*****************************************************************/

/* Port I data output latch register */
DEF_8BIT_REG_AT(PI_ODR,0x5028);

/* Port I input pin value register */
DEF_8BIT_REG_AT(PI_IDR,0x5029);

/* Port I data direction register */
DEF_8BIT_REG_AT(PI_DDR,0x502a);

/* Port I control register 1 */
DEF_8BIT_REG_AT(PI_CR1,0x502b);

/* Port I control register 2 */
DEF_8BIT_REG_AT(PI_CR2,0x502c);

/* Flash */
/*****************************************************************/

/* Flash control register 1 */
DEF_8BIT_REG_AT(FLASH_CR1,0x505a);

/* Flash control register 2 */
DEF_8BIT_REG_AT(FLASH_CR2,0x505b);

/* Flash complementary control register 2 */
DEF_8BIT_REG_AT(FLASH_NCR2,0x505c);

/* Flash protection register */
DEF_8BIT_REG_AT(FLASH_FPR,0x505d);

/* Flash complementary protection register */
DEF_8BIT_REG_AT(FLASH_NFPR,0x505e);

/* Flash in-application programming status register */
DEF_8BIT_REG_AT(FLASH_IAPSR,0x505f);

/* Flash Program memory unprotection register */
DEF_8BIT_REG_AT(FLASH_PUKR,0x5062);

/* Data EEPROM unprotection register */
DEF_8BIT_REG_AT(FLASH_DUKR,0x5064);

/* External Interrupt Control Register (ITC) */
/*****************************************************************/

/* External interrupt control register 1 */
DEF_8BIT_REG_AT(EXTI_CR1,0x50a0);

/* External interrupt control register 2 */
DEF_8BIT_REG_AT(EXTI_CR2,0x50a1);

/* Reset (RST) */
/*****************************************************************/

/* Reset status register 1 */
DEF_8BIT_REG_AT(RST_SR,0x50b3);

/* Clock Control (CLK) */
/*****************************************************************/

/* Internal clock control register */
DEF_8BIT_REG_AT(CLK_ICKR,0x50c0);

/* External clock control register */
DEF_8BIT_REG_AT(CLK_ECKR,0x50c1);

/* Clock master status register */
DEF_8BIT_REG_AT(CLK_CMSR,0x50c3);

/* Clock master switch register */
DEF_8BIT_REG_AT(CLK_SWR,0x50c4);

/* Clock switch control register */
DEF_8BIT_REG_AT(CLK_SWCR,0x50c5);

/* Clock divider register */
DEF_8BIT_REG_AT(CLK_CKDIVR,0x50c6);

/* Peripheral clock gating register 1 */
DEF_8BIT_REG_AT(CLK_PCKENR1,0x50c7);

/* Clock security system register */
DEF_8BIT_REG_AT(CLK_CSSR,0x50c8);

/* Configurable clock control register */
DEF_8BIT_REG_AT(CLK_CCOR,0x50c9);

/* Peripheral clock gating register 2 */
DEF_8BIT_REG_AT(CLK_PCKENR2,0x50ca);

/* CAN clock control register */
DEF_8BIT_REG_AT(CLK_CANCCR,0x50cb);

/* HSI clock calibration trimming register */
DEF_8BIT_REG_AT(CLK_HSITRIMR,0x50cc);

/* SWIM clock control register */
DEF_8BIT_REG_AT(CLK_SWIMCCR,0x50cd);

/* Window Watchdog (WWDG) */
/*****************************************************************/

/* WWDG Control Register */
DEF_8BIT_REG_AT(WWDG_CR,0x50d1);

/* WWDR Window Register */
DEF_8BIT_REG_AT(WWDG_WR,0x50d2);

/* Independent Watchdog (IWDG) */
/*****************************************************************/

/* IWDG Key Register */
DEF_8BIT_REG_AT(IWDG_KR,0x50e0);

/* IWDG Prescaler Register */
DEF_8BIT_REG_AT(IWDG_PR,0x50e1);

/* IWDG Reload Register */
DEF_8BIT_REG_AT(IWDG_RLR,0x50e2);

/* Auto Wake-Up (AWU) */
/*****************************************************************/

/* AWU Control/Status Register */
DEF_8BIT_REG_AT(AWU_CSR,0x50f0);

/* AWU asynchronous prescaler buffer register */
DEF_8BIT_REG_AT(AWU_APR,0x50f1);

/* AWU Timebase selection register */
DEF_8BIT_REG_AT(AWU_TBR,0x50f2);

/* Beeper (BEEP) */
/*****************************************************************/

/* BEEP Control/Status Register */
DEF_8BIT_REG_AT(BEEP_CSR,0x50f3);

/* Serial Peripheral Interface (SPI) */
/*****************************************************************/

/* SPI Control Register 1 */
DEF_8BIT_REG_AT(SPI_CR1,0x5200);

/* SPI Control Register 2 */
DEF_8BIT_REG_AT(SPI_CR2,0x5201);

/* SPI Interrupt Control Register */
DEF_8BIT_REG_AT(SPI_ICR,0x5202);

/* SPI Status Register */
DEF_8BIT_REG_AT(SPI_SR,0x5203);

/* SPI Data Register */
DEF_8BIT_REG_AT(SPI_DR,0x5204);

/* SPI CRC Polynomial Register */
DEF_8BIT_REG_AT(SPI_CRCPR,0x5205);

/* SPI Rx CRC Register */
DEF_8BIT_REG_AT(SPI_RXCRCR,0x5206);

/* SPI Tx CRC Register */
DEF_8BIT_REG_AT(SPI_TXCRCR,0x5207);

/* I2C Bus Interface (I2C) */
/*****************************************************************/

/* I2C control register 1 */
DEF_8BIT_REG_AT(I2C_CR1,0x5210);

/* I2C control register 2 */
DEF_8BIT_REG_AT(I2C_CR2,0x5211);

/* I2C frequency register */
DEF_8BIT_REG_AT(I2C_FREQR,0x5212);

/* I2C Own address register low */
DEF_8BIT_REG_AT(I2C_OARL,0x5213);

/* I2C Own address register high */
DEF_8BIT_REG_AT(I2C_OARH,0x5214);

/* I2C data register */
DEF_8BIT_REG_AT(I2C_DR,0x5216);

/* I2C status register 1 */
DEF_8BIT_REG_AT(I2C_SR1,0x5217);

/* I2C status register 2 */
DEF_8BIT_REG_AT(I2C_SR2,0x5218);

/* I2C status register 3 */
DEF_8BIT_REG_AT(I2C_SR3,0x5219);

/* I2C interrupt control register */
DEF_8BIT_REG_AT(I2C_ITR,0x521a);

/* I2C Clock control register low */
DEF_8BIT_REG_AT(I2C_CCRL,0x521b);

/* I2C Clock control register high */
DEF_8BIT_REG_AT(I2C_CCRH,0x521c);

/* I2C TRISE register */
DEF_8BIT_REG_AT(I2C_TRISER,0x521d);

/* I2C packet error checking register */
DEF_8BIT_REG_AT(I2C_PECR,0x521e);