stm8s_it.c

按键是比较复杂。可以用状态机表示。 每10mS执行一次键盘扫描任务 0、无键

  * None
  */
@near @interrupt void TIM5_UPD_OVF_BRK_TRG_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}
/**
  * @brief Timer5 Capture/Compare Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void TIM5_CAP_COM_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}

#else /*STM8S208, STM8S207, STM8S105 or STM8S103*/
/**
  * @brief Timer2 Update/Overflow/Break Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void TIM2_UPD_OVF_BRK_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}

/**
  * @brief Timer2 Capture/Compare Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void TIM2_CAP_COM_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}
#endif /*STM8S903*/

#if defined (STM8S208) || defined(STM8S207) || defined(STM8S105)
/**
  * @brief Timer3 Update/Overflow/Break Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void TIM3_UPD_OVF_BRK_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}

/**
  * @brief Timer3 Capture/Compare Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void TIM3_CAP_COM_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}
#endif /*STM8S208, STM8S207 or STM8S105*/

#ifndef STM8S105
/**
  * @brief UART1 TX Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void UART1_TX_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}

/**
  * @brief UART1 RX Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void UART1_RX_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}
#endif /*STM8S105*/

/**
  * @brief I2C Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void I2C_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}

#ifdef STM8S105
/**
  * @brief UART2 TX interrupt routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void UART2_TX_IRQHandler (void)
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
    return;
}

/**
  * @brief UART2 RX interrupt routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void UART2_RX_IRQHandler (void)
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
    return;
}
#endif /* STM8S105*/

#if defined(STM8S207) || defined(STM8S208)
/**
  * @brief UART3 TX interrupt routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void UART3_TX_IRQHandler (void)
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
    return;
}

/**
  * @brief UART3 RX interrupt routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void UART3_RX_IRQHandler (void)
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
    return;
}
#endif /*STM8S208 or STM8S207*/

#if defined(STM8S207) || defined(STM8S208)
/**
  * @brief ADC2 interrupt routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void ADC2_IRQHandler (void)
{

    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
    return;

}
#else /*STM8S105, STM8S103 or STM8S903*/
/**
  * @brief ADC1 interrupt routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void ADC1_IRQHandler (void)
{

    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
    return;

}
#endif /*STM8S208 or STM8S207*/

#ifdef STM8S903
/**
  * @brief Timer6 Update/Overflow/Trigger Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void TIM6_UPD_OVF_TRG_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}
#else /*STM8S208, STM8S207, STM8S105 or STM8S103*/
/**
  * @brief Timer4 Update/Overflow Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void TIM4_UPD_OVF_IRQHandler (void)
{
  /* Toggle GPIO PIN5 */ 
	GPIO_WriteReverse(GPIOD, GPIO_PIN_4);

	TIM4_ClearITPendingBit(TIM4_IT_UPDATE);
}
#endif /*STM8S903*/

/**
  * @brief Eeprom EEC Interruption routine.
  * @par Parameters:
  * None
  * @retval void None
  * @par Required preconditions:
  * None
  * @par Called functions:
  * None
  */
@near @interrupt void EEPROM_EEC_IRQHandler (void)
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
  return;
}

/**
  * @}
  */

/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/