stm3210e-eval.plg

STM32F103RBT6上的USB测试程序

Build target 'STM3210E-EVAL'
compiling hw_config.c...
compiling main.c...
compiling stm32f10x_it.c...
compiling usb_desc.c...
compiling usb_istr.c...
compiling usb_prop.c...
compiling usb_pwr.c...
compiling usb_core.c...
compiling usb_init.c...
compiling usb_int.c...
compiling usb_mem.c...
compiling usb_regs.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_nvic.c...
compiling stm32f10x_flash.c...
compiling stm32f10x_pwr.c...
compiling stm32f10x_exti.c...
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
linking...
Program Size: Code=6660 RO-data=536 RW-data=292 ZI-data=1052  
".\Obj\STM3210E-EVAL.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Documents and Settings\\lenovo\\桌面\\USBLib\\demos\\JoyStickMouse\\project\\RVMDK\\Obj\\STM3210E-EVAL.AXF" 
VTarget = 3.222V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
DLL version V3.90d, compiled Sep  1 2008 13:56:39
Firmware: J-Link ARM V6 compiled Jan 13 2009 15:40:53
Hardware: V6.00
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x3BA00477
 Id of device #1: 0x06414041
Cortex-M3 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Application running ...
Build target 'STM3210E-EVAL'
compiling hw_config.c...
linking...
Program Size: Code=6660 RO-data=536 RW-data=292 ZI-data=1052  
".\Obj\STM3210E-EVAL.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Documents and Settings\\lenovo\\桌面\\USBLib\\demos\\JoyStickMouse\\project\\RVMDK\\Obj\\STM3210E-EVAL.AXF" 
VTarget = 3.222V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
DLL version V3.90d, compiled Sep  1 2008 13:56:39
Firmware: J-Link ARM V6 compiled Jan 13 2009 15:40:53
Hardware: V6.00
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x3BA00477
 Id of device #1: 0x06414041
Cortex-M3 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Application running ...
Build target 'STM3210E-EVAL'
compiling main.c...
linking...
Program Size: Code=6672 RO-data=536 RW-data=292 ZI-data=1052  
".\Obj\STM3210E-EVAL.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Documents and Settings\\lenovo\\桌面\\USBLib\\demos\\JoyStickMouse\\project\\RVMDK\\Obj\\STM3210E-EVAL.AXF" 
VTarget = 3.222V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
DLL version V3.90d, compiled Sep  1 2008 13:56:39
Firmware: J-Link ARM V6 compiled Jan 13 2009 15:40:53
Hardware: V6.00
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x3BA00477
 Id of device #1: 0x06414041
Cortex-M3 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Application running ...
Build target 'STM3210E-EVAL'
compiling main.c...
linking...
Program Size: Code=6668 RO-data=536 RW-data=292 ZI-data=1052  
".\Obj\STM3210E-EVAL.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Documents and Settings\\lenovo\\桌面\\USBLib\\demos\\JoyStickMouse\\project\\RVMDK\\Obj\\STM3210E-EVAL.AXF" 
VTarget = 3.222V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
DLL version V3.90d, compiled Sep  1 2008 13:56:39
Firmware: J-Link ARM V6 compiled Jan 13 2009 15:40:53
Hardware: V6.00
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x3BA00477
 Id of device #1: 0x06414041
Cortex-M3 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Application running ...
Build target 'STM3210E-EVAL'
compiling hw_config.c...
compiling main.c...
compiling stm32f10x_it.c...
linking...
Program Size: Code=6660 RO-data=536 RW-data=292 ZI-data=1052  
".\Obj\STM3210E-EVAL.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Documents and Settings\\lenovo\\桌面\\USBLib\\demos\\JoyStickMouse\\project\\RVMDK\\Obj\\STM3210E-EVAL.AXF" 
VTarget = 3.222V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
DLL version V3.90d, compiled Sep  1 2008 13:56:39
Firmware: J-Link ARM V6 compiled Jan 13 2009 15:40:53
Hardware: V6.00
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x3BA00477
 Id of device #1: 0x06414041
Cortex-M3 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Application running ...
Build target 'STM3210E-EVAL'
compiling hw_config.c...
compiling main.c...
compiling stm32f10x_it.c...
compiling usb_desc.c...
compiling usb_istr.c...
compiling usb_prop.c...
compiling usb_pwr.c...
compiling usb_core.c...
compiling usb_init.c...
compiling usb_int.c...
compiling usb_mem.c...
compiling usb_regs.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_nvic.c...
compiling stm32f10x_flash.c...
compiling stm32f10x_pwr.c...
compiling stm32f10x_exti.c...
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
linking...
Program Size: Code=6660 RO-data=536 RW-data=292 ZI-data=1052  
".\Obj\STM3210E-EVAL.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Documents and Settings\\lenovo\\桌面\\USBLib\\demos\\JoyStickMouse\\project\\RVMDK\\Obj\\STM3210E-EVAL.AXF" 
VTarget = 3.222V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
DLL version V3.90d, compiled Sep  1 2008 13:56:39
Firmware: J-Link ARM V6 compiled Jan 13 2009 15:40:53
Hardware: V6.00
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x3BA00477
 Id of device #1: 0x06414041
Cortex-M3 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Application running ...
Build target 'STM3210E-EVAL'
compiling hw_config.c...