📄 stm3210e-eval.plg

📁 STM32F103RBT6上的USB测试程序

💻 PLG

字号:

<html>
<body>
<pre>
<h1>礦ision3 Build Log</h1>
<h2>Project:</h2>
C:\Documents and Settings\lenovo\桌面\USBLib\demos\Audio_Speaker\project\RVMDK\AudioSpeaker.uv2
Project File Date:  03/04/2009

<h2>Output:</h2>
Load "C:\\Documents and Settings\\lenovo\\桌面\\USBLib\\demos\\Audio_Speaker\\project\\RVMDK\\Obj\\STM3210E-EVAL.AXF" 
VTarget = 3.222V
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: RESET (pin 15) high, but should be low. Please check target hardware.
DLL version V3.90d, compiled Sep  1 2008 13:56:39
Firmware: J-Link ARM V6 compiled Jan 13 2009 15:40:53
Hardware: V6.00
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found 2 JTAG devices, Total IRLen = 9:
 Id of device #0: 0x3BA00477
 Id of device #1: 0x06414041
Cortex-M3 identified.
JTAG speed: 5 kHz
Info: TotalIRLen = 9, IRPrint = 0x0011
Info: Found Cortex-M3 r1p1, Little endian.
Info: TPIU fitted.
Info: ETM fitted.
Info:   FPUnit: 6 code (BP) slots and 2 literal slots
JTAG speed: 1000 kHz
Erase Done.
Programming Done.
Verify OK.

⌨️ 快捷键说明

复制代码 Ctrl + C

搜索代码 Ctrl + F

全屏模式 F11

切换主题 Ctrl + Shift + D

显示快捷键 ?

增大字号 Ctrl + =

减小字号 Ctrl + -