dio.c

uC_OS_II_外围接口程序源代码.rar

        case DO_BLINK_EN_INV:               /* Blink depends on the complemented user request's state  */
             en = pdo->DOBypass ? FALSE : TRUE;
             break;
    }
    return (en);
}
#endif

/*$PAGE*/
/*
*********************************************************************************************************
*                                 SET THE STATE OF THE DISCRETE OUTPUT
*
* Description : This function is used to set the state of the discrete output.
* Arguments   : n     is the discrete output channel (0..DIO_MAX_DO-1).
*               state is the desired state of the output:
*                         FALSE indicates a  negated  output
*                         TRUE  indicates an asserted output
* Returns     : None.
* Notes       : The actual output will be complemented if 'DIInv' is set to TRUE.
*********************************************************************************************************
*/

void  DOSet (INT8U n, BOOLEAN state)
{
    if (n < DIO_MAX_DO) {
        OS_ENTER_CRITICAL();
        DOTbl[n].DOCtrl = state;
        OS_EXIT_CRITICAL();
    }
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                  SET THE STATE OF THE BYPASSED OUTPUT
*
* Description : This function is used to set the state of the bypassed output.  This function is used to
*               override (or bypass) the application software and allow the output to be controlled
*               directly.  This function is only valid if the bypass switch is open.
* Arguments   : n       is the discrete output channel (0..DIO_MAX_DO-1).
*               state   is the desired state of the output:
*                         FALSE indicates a  negated  output
*                         TRUE  indicates an asserted output
* Returns     : None.
* Notes       : 1) The actual output will be complemented if 'DIInv' is set to TRUE.
*               2) In blink mode, this allows blinking to be enabled or not.
*********************************************************************************************************
*/

void  DOSetBypass (INT8U n, BOOLEAN state)
{
    DIO_DO  *pdo;
    
    
    if (n < DIO_MAX_DO) {
        pdo = &DOTbl[n];
        OS_ENTER_CRITICAL();
        if (pdo->DOBypassEn == TRUE) {
            pdo->DOBypass = state;
        }
        OS_EXIT_CRITICAL();
    }
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                  SET THE STATE OF THE OUTPUT BYPASS
*
* Description : This function is used to set the state of the output bypass switch.  The output is
*               bypassed when the 'switch' is open (i.e. DOBypassEn is set to TRUE).
* Arguments   : n     is the discrete output channel (0..DIO_MAX_DO-1).
*               state is the state of the bypass switch:
*                         FALSE disables output bypass (i.e. the switch is closed)
*                         TRUE  enables  output bypass (i.e. the switch is open)
* Returns     : None.
*********************************************************************************************************
*/

void  DOSetBypassEn (INT8U n, BOOLEAN state)
{
    if (n < DIO_MAX_DO) {
        OS_ENTER_CRITICAL();
        DOTbl[n].DOBypassEn = state;
        OS_EXIT_CRITICAL();
    }
}

/*$PAGE*/

/*
*********************************************************************************************************
*                            SET THE MAXIMUM VALUE FOR THE SYNCHRONOUS COUNTER
*
* Description : This function is used to set the maximum value taken by the synchronous counter which is
*               used in the synchronous blink mode.
* Arguments   : val   is the maximum value for the counter (1..255)
* Returns     : None.
*********************************************************************************************************
*/

#if  DO_BLINK_MODE_EN
void  DOSetSyncCtrMax (INT8U val)
{
    OS_ENTER_CRITICAL();
    DOSyncCtrMax = val;
    DOSyncCtr    = val;
    OS_EXIT_CRITICAL();
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
*                                    UPDATE DISCRETE OUT CHANNELS
*
* Description : This function is called to process all of the discrete output channels.
* Arguments   : None.
* Returns     : None.
*********************************************************************************************************
*/

static  void  DOUpdate (void)
{
    INT8U     i;
    BOOLEAN   out;
    DIO_DO   *pdo;


    pdo = &DOTbl[0];
    for (i = 0; i < DIO_MAX_DO; i++) {           /* Process all discrete output channels               */
        if (pdo->DOBypassEn == FALSE) {          /* See if DO channel is enabled                       */
            pdo->DOBypass = pdo->DOCtrl;         /* Obtain control state from application              */
        }
        out = FALSE;                             /* Assume that the output will be low unless changed  */
        switch (pdo->DOModeSel) {
            case DO_MODE_LOW:                    /* Output will in fact be low                         */
                 break;

            case DO_MODE_HIGH:                   /* Output will be high                                */
                 out = TRUE;
                 break;

            case DO_MODE_DIRECT:                 /* Output is based on state of user supplied state    */
                 out = pdo->DOBypass;
                 break;
/*$PAGE*/
#if DO_BLINK_MODE_EN
            case DO_MODE_BLINK_SYNC:                       /* Sync. Blink mode                         */
                 if (DOIsBlinkEn(pdo)) {                   /* See if Blink is enabled ...              */
                     if (pdo->DOA >= DOSyncCtr) {          /* ... yes, High when below threshold       */
                         out = TRUE;
                     }
                 }
                 break;

            case DO_MODE_BLINK_ASYNC:                      /* Async. Blink mode                        */
                 if (DOIsBlinkEn(pdo)) {                   /* See if Blink is enabled ...              */
                     if (pdo->DOA >= pdo->DOBCtr) {        /* ... yes, High when below threshold       */
                         out = TRUE;
                     }
                 }
                 if (pdo->DOBCtr < pdo->DOB) {             /* Update the threshold counter             */
                     pdo->DOBCtr++;
                 } else {
                     pdo->DOBCtr = 0;
                 }
                 break;
#endif
        }
        if (pdo->DOInv == TRUE) {                          /* See if output needs to be inverted ...   */
            pdo->DOOut = out ? FALSE : TRUE;               /* ... yes, complement output               */
        } else {
            pdo->DOOut = out;                              /* ... no,  no inversion!                   */
        }
        pdo++;                                             /* Point to next DIO_DO element             */
    }
#if DO_BLINK_MODE_EN
    if (DOSyncCtr < DOSyncCtrMax) {                        /* Update the synchronous free running ctr  */
        DOSyncCtr++;
    } else {
        DOSyncCtr = 0;
    }
#endif
}
/*$PAGE*/
#ifndef CFG_C
/*
*********************************************************************************************************
*                                      INITIALIZE PHYSICAL I/Os
*
* Description : This function is by DIOInit() to initialze the physical I/O used by the DIO driver.
* Arguments   : None.
* Returns     : None.
* Notes       : The physical I/O is assumed to be an 82C55 chip initialized as follows:
*                   Port A = OUT  (Discrete outputs)
*                   Port B = IN   (Discrete inputs)
*                   Port C = OUT  (not used)
*********************************************************************************************************
*/

void  DIOInitIO (void)
{
    outp(0x0303, 0x82);                          /* Port A = OUT, Port B = IN, Port C = OUT            */
}

/*
*********************************************************************************************************
*                                         READ PHYSICAL INPUTS
*
* Description : This function is called to read and map all of the physical inputs used for discrete
*               inputs and map these inputs to their appropriate discrete input data structure.
* Arguments   : None.
* Returns     : None.
*********************************************************************************************************
*/

void  DIRd (void)
{
    DIO_DI  *pdi;
    INT8U    i;
    INT8U    in;
    INT8U    msk;


    pdi = &DITbl[0];                                       /* Point at beginning of discrete inputs    */
    msk = 0x01;                                            /* Set mask to extract bit 0                */
    in  = inp(0x0301);                                     /* Read the physical port (8 bits)          */
    for (i = 0; i < 8; i++) {                              /* Map all 8 bits to first 8 DI channels    */
        pdi->DIIn   = (BOOLEAN)(in & msk) ? 1 : 0;
        msk       <<= 1;
        pdi++;
    }
}
/*$PAGE*/
/*
*********************************************************************************************************
*                                       UPDATE PHYSICAL OUTPUTS
*
* Description : This function is called to map all of the discrete output channels to their appropriate
*               physical destinations.
* Arguments   : None.
* Returns     : None.
*********************************************************************************************************
*/

void  DOWr (void)
{
    DIO_DO  *pdo;
    INT8U    i;
    INT8U    out;
    INT8U    msk;


    pdo = &DOTbl[0];                        /* Point at first discrete output channel                  */
    msk = 0x01;                             /* First DO will be mapped to bit 0                        */
    out = 0x00;                             /* Local 8 bit port image                                  */
    for (i = 0; i < 8; i++) {               /* Map first 8 DO to 8 bit port image                      */
        if (pdo->DOOut == TRUE) {
            out |= msk;
        }
        msk <<= 1;
        pdo++;
    }
    outp(0x0300, out);                      /* Output port image to physical port                      */
}
#endif