map.xmsgs

multi-function clock

<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated
     by the Xilinx ISE software.  Any direct editing or
     changes made to this file may result in unpredictable
     behavior or data corruption.  It is strongly advised that
     users do not edit the contents of this file. -->
<messages>
<msg type="info" file="MapLib" num="562" delta="unknown" >No environment variables are currently set.
</msg>

<msg type="info" file="MapLib" num="535" delta="unknown" >The following Virtex BUFG(s) is/are being retargetted to Virtex2 BUFGMUX(s) with input tied to I0 and Select pin tied to constant 0:
<arg fmt="%s" index="1">BUFGP symbol &quot;clk_BUFGP&quot; (output signal=clk_BUFGP)</arg>
</msg>

<msg type="info" file="LIT" num="244" delta="unknown" >All of the single ended outputs in this design are using slew rate limited output drivers. The delay on speed critical single ended outputs can be dramatically reduced by designating them as fast outputs in the schematic.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net minute10 is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net msecond10 is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net minute is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net second is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net hour is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net hour10 is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net second10 is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net _n0021 is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

<msg type="warning" file="PhysDesignRules" num="372">Gated clock. Clock net _n0022 is sourced by a combinatorial pin. This is not good design practice. Use the CE pin to control the loading of data into the flip-flop.
</msg>

</messages>