smartrf_cc1110.prs

SimpliciTI协议栈使用IAR编译器,对于要了解使用此协议的朋友有益

FSCTRL1  |0xDF07|0x12|Frequency synthesizer control.
FSCTRL0  |0xDF08|0x00|Frequency synthesizer control.
FREQ2    |0xDF09|0x22|Frequency control word, high byte.
FREQ1    |0xDF0A|0xB1|Frequency control word, middle byte.
FREQ0    |0xDF0B|0x3B|Frequency control word, low byte.
MDMCFG4  |0xDF0C|0x2D|Modem configuration.
MDMCFG3  |0xDF0D|0x3B|Modem configuration.
MDMCFG2  |0xDF0E|0x13|Modem configuration.
MDMCFG1  |0xDF0F|0x22|Modem configuration.
MDMCFG0  |0xDF10|0xF8|Modem configuration.
CHANNR   |0xDF06|0x14|Channel number.
DEVIATN  |0xDF11|0x62|Modem deviation setting (when FSK modulation is enabled).
FREND1   |0xDF1A|0xB6|Front end RX configuration.
FREND0   |0xDF1B|0x10|Front end RX configuration.
MCSM0    |0xDF14|0x18|Main Radio Control State Machine configuration.
FOCCFG   |0xDF15|0x1D|Frequency Offset Compensation Configuration.
BSCFG    |0xDF16|0x1C|Bit synchronization Configuration.
AGCCTRL2 |0xDF17|0xC7|AGC control.
AGCCTRL1 |0xDF18|0x00|AGC control.
AGCCTRL0 |0xDF19|0xB0|AGC control.
FSCAL3   |0xDF1C|0xEA|Frequency synthesizer calibration.
FSCAL2   |0xDF1D|0x2A|Frequency synthesizer calibration.
FSCAL1   |0xDF1E|0x00|Frequency synthesizer calibration.
FSCAL0   |0xDF1F|0x1F|Frequency synthesizer calibration.
TEST2    |0xDF23|0x88|Various test settings.
TEST1    |0xDF24|0x31|Various test settings.
TEST0    |0xDF25|0x09|Various test settings.
PA_TABLE0|0xDF2E|0x8E|PA output power setting.
PKTCTRL1 |0xDF03|0x04|Packet automation control.
PKTCTRL0 |0xDF04|0x05|Packet automation control.
ADDR     |0xDF05|0x00|Device address.
PKTLEN   |0xDF02|0xFF|Packet length.