d0d7e6acdcdb001c145ca6ba85d01f2c

LPC21XX series GSM+GPS interfacing and application of a vehicle tracking

/***********************************************************************
*   RFvygr_main.c									  
************************************************************************/
#include<LPC21xx.h>
#include<print.h>

#define SevenLedOn  *IOSET1 = *IOSET1 |0x00FF0000
#define SevenLedOff *IOCLR1 = *IOCLR1 |0x00FF0000

#define  linefeed 	0x0D 
#define  send_cmd   0x00
#define  ent_no 	0x01
#define  snd_sms 	0x02
#define  dial_cmd 	0x00 
#define  ent_cmd    0x01
#define  no		 	0x00 
#define  yes        0x01

unsigned char recv_ch[100];	
unsigned char uart_int_flag;
unsigned char sms_flag;
unsigned char dial_flag;
unsigned char sms_start;	
void PollGSM(void);
void recv_irq(void);
void led_blink(void);
void dela(void);

void init_com( )         /* Initialize Serial Interface       */
{
	*PINSEL0 = *PINSEL0 | 0x00000005;        // Enable RxD1 and TxD1              /
	*U0LCR = 0x83;                          // 8 bits, no Parity, 1 Stop bit     /
	//*U0DLL = 24;                            // 38400 Baud Rate @ 15MHz VPB Clock  /
	*U0DLL = 97;
	*U0LCR = 0x03;                          // DLAB = 0                          /
	

	*PINSEL0 = *PINSEL0 | 0x00050000;    	/* Enable RxD1 and TxD1              */
	*U1LCR = 0x83;                          /* 8 bits, no Parity, 1 Stop bit     */
	*U1DLL = 97;                            /* 9600 Baud Rate @ 15MHz VPB Clock  */
	*U1LCR = 0x03;                          /* DLAB = 0                          */
}

int c1_putchar (int ch)  	                  /* Write character to com Port 1    */
{

	*U0THR = ch;				/* Transmit the data */
	while (!(*U0LSR & 0x20));	 /* Wait untill Transmit buffer is empty */
	  	return 0;					/* Success	*/
}

int c2_putchar (int ch)  	                  /* Write character to com Port 2   */
{	
	*U1THR = ch;				/* Transmit the data */
	while (!(*U1LSR & 0x20));	 /* Wait untill Transmit buffer is empty */
	  	return 0;					/* Success	*/
}

int c1_getchar (void)                       /* Read character from com Port 1   */
{
	while (!(*U0LSR & 0x01));		/* Wait untill Receive buffer is full */
	return (*U0RBR);				/* Return the read value	*/
}

int c2_getchar (void)                       /* Read character from com Port 2  */
{
	while (!(*U1LSR & 0x01));		/* Wait untill Receive buffer is full */
	return (*U1RBR);				/* Return the read value	*/	
}

void c1_putstr (char *p)                     // Write string 
{
	unsigned char i;
	//while (*p)
	//while (*p != '\0')  
	for(i=0;i<5;i++)
  	{
    	c1_putchar ((int) *p++);
  	}
}
void c2_putstr (char *p)                     // Write string 
{
	unsigned char i;
	//while (*p)
	//while (*p != '\0')  
	for(i=0;i<5;i++)
  	{
    	c2_putchar ((int) *p++);
  	}
}
/*
void c1_getstr (char *p)                     // Write string 
{
	unsigned char count;
	while (*p != '\0') 
  	{
    	c1_getchar ();
  	}
}

void c2_getstr (char *p)                     // Write string 
{
	while (*p != '\0') 
  	{
    	c2_getchar ();
  	}
}

*/
void delay()
{
int i;
for(i=0;i<100000;i++);
}

int main(void)
{
  //  unsigned char buf;
 //   unsigned char buf_str[256];
 unsigned char Com1Rcv[70];
 unsigned char Com2Rcv[70];
    unsigned char i;
    
    sms_flag = send_cmd;
    dial_flag = dial_cmd;
    uart_int_flag=no; 
    
    *PINSEL2 = *PINSEL2 & 0xFFFFFFF7;
	*IODIR1 = *IODIR1 |0x00FF0000;
	for(i=0;i<=3;i++)
 	{
		SevenLedOn;
		delay();
		SevenLedOff;
		delay();
	}
	
 	init_com( ) ;
 	q_printf("\r\n devloping tracking on voyger");
 	
 	for(i=0;i<=5;i++)
 	{
 		c1_putchar ('1');
    	c2_putchar ('2');
 	}
    while(1)
    {
    	//========for transmission===//
    	//c2_putchar(c1_getchar());
  		//for(i=0 ; i<10 ; i++)
  		//for(i=0;i!= '\0';i++)
    		//buf_str[i] = c1_getchar();
    	//c2_putstr(buf_str);
    	//--------------working 0-9
        //delay();
        //c2_putchar('\n');
        //for(i=0; i<=9 ; i++)
        //{
        //	c2_putchar('0'+i);
        //}        
    	////========for RECEIVER===//
    	//c1_putchar('1');
    	c2_putchar('2');
    	PollGSM();
    	if(uart_int_flag==yes)// check for the UART recv. flag
		{
			recv_irq();      // call function which will display message on LCD if valid.
			uart_int_flag=no;	
		}
    	//------working
   		 //for(i=0 ; i<5 ; i++)
    		//buf_str[i] = c2_getchar();
    	//c1_putstr(buf_str);   
    	/////////////////////////////////////////////
    		
    }
	return 0;
}

void PollGSM(void)
{
	unsigned char count;
	unsigned char temp;
	unsigned char start_flag;
	start_flag = no;
	//if((*U0LSR & 0x01))     // polling for the data available on UART recv.
	//while(!(*U0LSR & 0x01));
	if((*U0LSR & 0x01))
		{		
    		count=0 ;
    		do
			{				
		  		if(*U0LSR & 0x01)
		  		{
					temp=*U0RBR;	// Return the read value
					if(start_flag == no)
					{
						if(temp == 'R' || temp == ':' ) // validating the incoming call/sms start char.
						//if(temp == ':' ) // validating the incoming call/sms start char.
						{
							recv_ch[count++]=temp;
							uart_int_flag=yes;
							start_flag = yes;
							if(recv_ch[0]== ':')
							{	
								//q_printf("\r\n :");						
								do
								{
									if(*U0LSR & 0x01)
										recv_ch[count++]=*U0RBR;											
								}while(recv_ch[count-1]!= '\r');
								recv_ch[count-1]= 0;	
								sms_start = count-1;	//real starting position of sms txt. 			
							}							
						}
						else
							break;
					}
					else
						recv_ch[count++]=*U0RBR;
				 }		  			
			}while(recv_ch[count-1]!= '\r');
			start_flag = no;
			
		//	break;
		}
}

void recv_irq()
{	
	unsigned char count;
	
	switch(recv_ch[0]) 
	{
		case 'R':                   // for validating and indicating incomming call.
				if(recv_ch[1] == 'I')
				{
					if(recv_ch[2] == 'N')
					{
						if(recv_ch[3] == 'G')	
						{
							q_printf("%c",27); //0x1b-> esc
							q_printf("\r\nBOMLA");
							for(count=0;count<2;count++)							
								led_blink();
						}
					}
				}
				break;
				
		case ':':				// for validating and indicating incomming sms.
				if(recv_ch[1] == ' ')
				{
					if(recv_ch[2] == '"')
					{
						for(count=(sms_start+1) ; count<(sms_start+16);count++)	
						//for(count=(sms_start+1) ; count!= '\r' ;count++)
						   q_printf("%c",recv_ch[count]);	
						sms_start = 0;
							
						//for(count=0;count<2;count++)							
							//led_blink();
							
						//q_printf("AT+CNMA\r"); //positive acknoledment to the sms server.
						//dela();
					}
				}					
				break;
				
		default:			
				
				break;
		
	}
}

void led_blink(void)	
{
	SevenLedOn;
	delay();
	SevenLedOff;
	delay();
}

void dela(void)
{
	unsigned long int i,d;
	for(i=0;i<100;i++)
	{
		for(d=0;d<100;d++);
	}
}