modem.c

windows ce 3.00 嵌入式操作系统源代码

    DEBUGMSG(ZONE_FUNC, (TEXT("UNIMODEM:-ProcessModemFailure %d\n"), rc));
    return rc;
}   // ProcessModemFailure


BOOL
GetMonitorCommand(
    PTLINEDEV pLineDev
    )
{
    LPWSTR lpszTemp;
    DWORD dwSize;

    //
    // For manual dial modems, don't listen for incoming calls
    //
    if (pLineDev->DevMiniCfg.fwOptions & MANUAL_DIAL) {
        FreeNextCmd(pLineDev);
        return TRUE;
    }

    if (MdmRegGetValue(
            pLineDev,
            szSettings,
            szMonitor,
            REG_SZ,
            NULL,
            &dwSize) == ERROR_SUCCESS) {
        lpszTemp = TSPIAlloc(dwSize);
        if (!lpszTemp) {
            DEBUGMSG(ZONE_THREAD, (TEXT("UNIMODEM:GetMonitorCommand - Monitor cmd alloc failed 1\n")));
            goto gmc_DefaultMonitorCmd;
        }
        if (MdmRegGetValue(
                pLineDev,
                szSettings,
                szMonitor,
                REG_SZ,
                (PUCHAR)lpszTemp,
                &dwSize) == ERROR_SUCCESS) {    
            pLineDev->lpstrNextCmd = MdmConvertCommand(lpszTemp, NULL, NULL);
            TSPIFree(lpszTemp);
        } else {
            goto gmc_DefaultMonitorCmd;
        }
    } else {
gmc_DefaultMonitorCmd:
        pLineDev->lpstrNextCmd = TSPIAlloc(strlen(szDefaultMonitorCmd)+1);
        if (!pLineDev->lpstrNextCmd) {
            DEBUGMSG(ZONE_THREAD, (TEXT("UNIMODEM:GetMonitorCommand - Monitor cmd alloc failed 2\n")));
            return FALSE;
        }
        strcpy(pLineDev->lpstrNextCmd, szDefaultMonitorCmd);
    }
    return TRUE;
}

BOOL
DoModemInit(
    PTLINEDEV pLineDev
    )
{
    DCB commDCB;
    BOOL bRet;

    //
    // Turn off hardware flow control while sending commands.
    //
    GetCommState( pLineDev->hDevice, &commDCB );
    commDCB.fRtsControl = RTS_CONTROL_ENABLE;
    commDCB.fOutxCtsFlow = 0;
    SetCommState( pLineDev->hDevice, &commDCB );

    bRet = ModemInit(pLineDev);

    //
    // Restore original settings
    //
    SetDCBfromDevMiniCfg(&commDCB, &(pLineDev->DevMiniCfg));
    SetCommState( pLineDev->hDevice, &commDCB );

    return bRet;
}


//
// Send commands and listen for responses until the line is closed
//
DWORD
UnimodemControlThread(
    PTLINEDEV pLineDev
    )
{
    MODEMRESPCODES MdmResp;
    DWORD rc;
    BOOL  bPendingOp;
    HTAPICALL hPrevCall;

    EnterCriticalSection(&pLineDev->OpenCS);

    bPendingOp = !((PENDING_LISTEN == pLineDev->dwPendingType) || (INVALID_PENDINGOP == pLineDev->dwPendingType));

    DEBUGMSG(ZONE_FUNC|ZONE_THREAD, (TEXT("+UnimodemControlThread(%d)\n"), pLineDev->dwDeviceID));

    if (bPendingOp) {
        DEBUGMSG(ZONE_THREAD, (L"UnimodemControlThread(%d) PendingOp=%s\n",
            pLineDev->dwDeviceID, GetPendingName(pLineDev->dwPendingType)));
    }

    if (pLineDev->dwPendingType == PENDING_LINEMAKECALL) {
        hPrevCall = pLineDev->htCall;
    }

    rc = DevlineOpen(pLineDev);
    if ((rc) && (rc != LINEERR_ALLOCATED)) {
        DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) DevlineOpen failed\n"), pLineDev->dwDeviceID));
        goto uct_endCS;
    }

    FreeNextCmd(pLineDev);

    if (IS_NULL_MODEM(pLineDev)) {
        SetCommMask(pLineDev->hDevice, EV_DEFAULT);
    } else {
        //
        // Don't init a manual dial modem
        //
        if (pLineDev->DevMiniCfg.fwOptions & MANUAL_DIAL) {
            SetCommMask(pLineDev->hDevice, EV_DEFAULT);
        } else {
            //
            // If modeminit fails, we sure won't be able to anything!
            //
            if (!DoModemInit(pLineDev)) {
                pLineDev->DevState = DEVST_DISCONNECTED;
                DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) ModemInit failed\n"), pLineDev->dwDeviceID));
                goto uct_endCS;
            }
        }
    }

    LeaveCriticalSection(&pLineDev->OpenCS);

    
    if (pLineDev->dwPendingType == PENDING_LINEMAKECALL) {
        pLineDev->DevState = DEVST_PORTCONNECTDIAL;
        ProcessModemFailure(pLineDev);
    } else {
        pLineDev->DevState = DEVST_PORTLISTENING;
        if (!IS_NULL_MODEM(pLineDev)) {
            //
            // Not making a call so monitor the line for incoming calls.
            //
            if (!GetMonitorCommand(pLineDev)) {
                goto uct_end;
            }
        }
    }

    bPendingOp = FALSE;
    MdmResp = MODEM_FAILURE;

uct_monitor:    
    //
    // Monitor modem responses
    //
    while (pLineDev->DevState != DEVST_DISCONNECTED) {
        if ((pLineDev->DevState == DEVST_PORTLISTENING) || (pLineDev->DevState == DEVST_PORTLISTENOFFER)) {
            if (pLineDev->lpstrNextCmd) {
                if (!MdmSendCommand(pLineDev, pLineDev->lpstrNextCmd)) {
                    goto uct_end;
                }
            }

            EnterCriticalSection(&pLineDev->OpenCS);

            //
            // If the user did an open/close in quick succession then check for it.
            //
            switch (pLineDev->dwPendingType) {
            case PENDING_EXIT:
                MdmResp = MODEM_EXIT;
                goto uct_endCS;
                break;

            case PENDING_LINEMAKECALL:
                pLineDev->DevState = DEVST_PORTCONNECTDIAL;
                MdmResp = MODEM_FAILURE;
                LeaveCriticalSection(&pLineDev->OpenCS);
                goto uct_process;
                break;
            }

            if (pLineDev->lpstrNextCmd) {
                if (IS_NULL_MODEM(pLineDev)) {
                    //
                    // We only get here if we just responded with "CLIENTSERVER" to someone's "CLIENT",
                    // so no further responses are needed. The connection is established.
                    //
                    MdmResp = MODEM_CONNECT;
                    SetEvent(pLineDev->hCallComplete);
                    LeaveCriticalSection(&pLineDev->OpenCS);
                } else {
                    //
                    // Some modems don't respond to the monitor command until an incoming call is made,
                    // but some modems do respond to the monitor command so we wait for a MODEM_RING response.
                    //
                    if ((MdmResp = MdmGetResponse(pLineDev, pLineDev->lpstrNextCmd, LEAVECS)) == MODEM_SUCCESS) {
                        if (pLineDev->dwPendingType == PENDING_LISTEN) {
                            MdmResp = MdmGetResponse(pLineDev, pLineDev->lpstrNextCmd, NOCS);
                        }
                    }
                }
            } else {
                PurgeComm(pLineDev->hDevice, PURGE_RXCLEAR|PURGE_TXCLEAR);

                //
                // DCC server has no specific monitor command.
                // Also for manual dial, this thread needs to be in a WaitCommEvent
                //
                MdmResp = MdmGetResponse(pLineDev, "listening", LEAVECS);
            }
        }


uct_process:
        FreeNextCmd(pLineDev);

        switch (MdmResp) {
        case MODEM_RING:
            DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) MODEM_RING\n"), pLineDev->dwDeviceID));
            ProcessModemRing(pLineDev);
            break;

        case MODEM_CARRIER:
        case MODEM_PROTOCOL:
        case MODEM_PROGRESS:
            DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) LINECALLSTATE_PROCEEDING\n"), pLineDev->dwDeviceID));
            ProcessModemProceeding(pLineDev);
            break;

        case MODEM_CONNECT:
            DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) LINECALLSTATE_CONNECTED\n"), pLineDev->dwDeviceID));
            ProcessModemConnect(pLineDev);
            break;

        case MODEM_SUCCESS:
            DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) MODEM_SUCCESS\n"), pLineDev->dwDeviceID));
            ProcessModemSuccess(pLineDev);
            break;
        
        case MODEM_FAILURE:
            DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) MODEM_FAILURE\n"), pLineDev->dwDeviceID));
            if (ProcessModemFailure(pLineDev)) {
                goto uct_end;
            }
            break;

        case MODEM_EXIT:
            DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) MODEM_EXIT\n"), pLineDev->dwDeviceID));
            goto uct_end;
            break;

        }   // switch
        MdmResp = MODEM_FAILURE;
    }   // while


uct_end:

    //
    // Go back to monitoring for incoming calls if needed
    //
    if (pLineDev->dwDetMediaModes) {
        //
        // Make sure the handle is still valid.
        //
        if (SetCommMask(pLineDev->hDevice, EV_DEFAULT)) {
            pLineDev->DevState = DEVST_PORTLISTENING;
            if (IS_NULL_MODEM(pLineDev)) {
                DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) Continue monitoring\n"), pLineDev->dwDeviceID));
                goto uct_monitor;
            }
            if (GetMonitorCommand(pLineDev)) {
                pLineDev->dwNumRings = 0;
                EnterCriticalSection(&pLineDev->OpenCS);
                if (pLineDev->dwPendingStatus == LINEERR_ALLOCATED) {
                    SetAsyncStatus(pLineDev, LINEERR_OPERATIONFAILED);
                }
                LeaveCriticalSection(&pLineDev->OpenCS);
                DEBUGMSG(ZONE_THREAD, (TEXT("UnimodemControlThread(%d) Continue monitoring\n"), pLineDev->dwDeviceID));
                goto uct_monitor;
            }
        }
    }

    EnterCriticalSection(&pLineDev->OpenCS);
    //
    // Special case for PASSTHROUGH connections
    //
    if (pLineDev->fTakeoverMode) {
        pLineDev->bControlThreadRunning = FALSE;
        LeaveCriticalSection(&pLineDev->OpenCS);
        DEBUGMSG(ZONE_THREAD|ZONE_FUNC, (TEXT("-UnimodemControlThread(%d) - PASSTHROUGH\n"), pLineDev->dwDeviceID));
        return 0;
    }


uct_endCS:
    FreeNextCmd(pLineDev);

    // Make sure that we do not leave anything open
    SetWatchdog(pLineDev, 0 ); // Cancel watchdog
    DevlineClose(pLineDev, TRUE);
    pLineDev->bControlThreadRunning = FALSE;
    LeaveCriticalSection(&pLineDev->OpenCS);

    if (bPendingOp) {
        if (pLineDev->dwPendingType == PENDING_LINEMAKECALL) {
            pLineDev->htCall = hPrevCall;
            NewCallState(pLineDev, LINECALLSTATE_DISCONNECTED, 0L);
            pLineDev->htCall = NULL;
        }
        SetAsyncStatus(pLineDev, LINEERR_OPERATIONFAILED);
    }

    DEBUGMSG(ZONE_THREAD|ZONE_FUNC, (TEXT("-UnimodemControlThread(%d)\n"), pLineDev->dwDeviceID));
    return 0;
}   // UnimodemControlThread


LONG
StartControlThread(
    PTLINEDEV pLineDev
    )
{
    HANDLE hThd;
    LONG rc;

    DEBUGMSG(ZONE_FUNC, (TEXT("UNIMODEM:+StartControlThread\n")));

    rc = 0;
    if (pLineDev->bControlThreadRunning == FALSE) {
        pLineDev->bControlThreadRunning = TRUE;

        hThd = CreateThread( NULL, 0, (LPTHREAD_START_ROUTINE)UnimodemControlThread,
                             pLineDev, 0, NULL );
        if (!hThd) {
            NKDbgPrintfW( TEXT("Unable to Create UnimodemControlThread\n") );
            pLineDev->bControlThreadRunning = FALSE;
            rc = LINEERR_OPERATIONFAILED;
        } else {
            CeSetThreadPriority(hThd, g_dwUnimodemThreadPriority);
            CloseHandle(hThd);
        }
    }

    DEBUGMSG(ZONE_FUNC, (TEXT("UNIMODEM:-StartControlThread returning %x\n"), rc));
    return rc;
}   // StartControlThread


LONG
SignalControlThread(
    PTLINEDEV pLineDev
    )
{
    LONG rc;
    DEBUGMSG(ZONE_FUNC, (TEXT("UNIMODEM:+SignalControlThread\n")));

    //
    // Signal UnimodemListenThread
    //
    rc = ToggleCommMask(pLineDev);
    DEBUGMSG(ZONE_FUNC, (TEXT("UNIMODEM:-SignalControlThread returning %x\n"), rc));
    return rc;
}   // SignalControlThread

//
// All TSPI_line* functions that need access to the modem go through here.
// The UnimodemControlThread sends the actual commands and processes the
// responses
//
LONG
ControlThreadCmd(
    PTLINEDEV pLineDev,
    DWORD dwPendingOP,
    DWORD dwPendingID
    )
{
    LONG rc;

    DEBUGMSG(ZONE_FUNC, (TEXT("UNIMODEM:+ControlThreadCmd\n")));

    // Fail current outstanding async request (if any) and remember this one
    SetAsyncOp(pLineDev, dwPendingOP);

    EnterCriticalSection(&pLineDev->OpenCS);

    if (pLineDev->bControlThreadRunning) {
        switch (dwPendingOP) {
        case PENDING_LINEDROP:
        case PENDING_EXIT:
        case PENDING_LINEANSWER:
        case PENDING_LINEDIAL:
        case PENDING_LINEMAKECALL:
        case PENDING_LISTEN:
            rc = SignalControlThread(pLineDev);
            break;

        default:
            rc = 0;
            break;
        }
    } else {
        switch (dwPendingOP) {
        case PENDING_LINEMAKECALL:
        case PENDING_LISTEN:
            rc = StartControlThread(pLineDev);
            break;

        case PENDING_EXIT:
        default:
            rc = LINEERR_OPERATIONFAILED;
            break;
        }
    }

    if (rc == 0) {
        switch (dwPendingOP) {
        case PENDING_LINEANSWER:
        case PENDING_LINEDIAL:
        case PENDING_LINEDROP:
        case PENDING_LINEMAKECALL:
            rc = dwPendingID;
            break;
        }
    }

    LeaveCriticalSection(&pLineDev->OpenCS);

    DEBUGMSG(ZONE_FUNC, (TEXT("UNIMODEM:-ControlThreadCmd returning %x\n"), rc));
    return rc;
}   // ControlThreadCmd