main.c

这个是FS44B0XII板子的BIOS源代码

/****************************************************************************
 * file name	: main.c
 * By 			: hugang, [e-mail]
****************************************************************************/

#include <stdio.h>
#include <stdarg.h>
#include <string.h>
#include "../inc/option.h"
#include "../inc/44b.h"
#include "../inc/44blib.h"
#include "../inc/def.h"
#include "../inc/rtc.h"
#include "../net/armnet.h"
#include "../inc/shell.h"
#include "../inc/flash.h"
#include "../inc/nand.h"

volatile char which_int=0;
unsigned char default_mac[MACLEN] = {0x12,0x34,0x56,0x78,0x90,0xab};
NODE locnode;

unsigned int SERIAL_BAUD = 115200;		//串口波特率设定

#ifdef SDT251
	ETHERFRAME etherframe;
#endif

#ifdef ADS120
	ETHERFRAME __align(4) etherframe;
#endif

TIME_STRUC SysTime;

unsigned int IP_ADDRESS;
unsigned int GATE_ADDRESS;
unsigned int MASK_ADDRESS;

unsigned char MCLK_M;
unsigned char MCLK_P;
unsigned char MCLK_S;

unsigned long prog_s_addr;
unsigned long prog_r_addr;

unsigned int download_addr;
unsigned int download_begin;
unsigned int download_end;
unsigned int download_len;

extern char *WeekDay[7] ;

void NetSever(void)
{	
	unsigned short rxlen,ip_len;
	unsigned char net_isr;
	ARPKT *arp;
	ETHERFRAME *efp;
	IPKT *ip;
	efp = &etherframe;

	net_isr = EN_ISR;
	
	if(net_isr & ENISR_RX)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted RX\n"));
		EN_ISR |= ENISR_RX;

		memset((unsigned char *)efp, 0, sizeof(ETHERFRAME));
		rxlen = GetEthernet(efp);
		SwapEther(efp);
		
		if(IsArp(efp, rxlen))
		{
			arp = (ARPKT *)(efp->edata);
			if(READ_PACKED(arp->dip)==locnode.ip &&(arp->op==ARPREQ || arp->op==ARPRESP))
			{
				DEBUGF(ARP_DEBUG,("Get ARP\n"));
				ArpRcvPacket(efp);
			}
		}
		else
		{
			ip_len = IsIp(efp, rxlen);
			if(ip_len)
			{
				ip = (IPKT *)(efp->edata);
				DEBUGF(DEMO_DEBUG,("Get IP\n"));
				if(IsIcmp(ip, ip_len))
				{
					DEBUGF(ICMP_DEBUG,("Get ICMP\n"));
					IcmpRcvPacket(efp);
				}
				else if(IsUdp(ip, ip_len))
				{
					DEBUGF(DEMO_DEBUG,("Get UDP\n"));
					UdpRcvPacket(efp);
				}
			}
		}
	}
	
	if(net_isr & ENISR_RX_ERR)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted RX_ERR\n"));
		EN_ISR |= ENISR_RX_ERR;
	}
	
	if(net_isr & ENISR_TX)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted TX\n"));
		EN_ISR |= ENISR_TX;
	}
	
	if(net_isr & ENISR_TX_ERR)
	{
		DEBUGF(DEMO_DEBUG,("Rtl8019 Interrupted TX_ERR\n"));
		EN_ISR |= ENISR_TX_ERR;
	}		
}
//***************************************************************************

void NodeInit(void)
{	
	ResetNic();
	locnode.ip = IP_ADDRESS;	
	locnode.mask = MASK_ADDRESS;
	locnode.gate = GATE_ADDRESS;
	memcpy(locnode.mac,default_mac,6);
	locnode.port = 9000;
}

void NetIntPreInit(void)
{
	rPCONG = rPCONG | 0x00c0;
	rPUPG = rPUPG & 0xf7;
	rEXTINT |= 0x4000;
}
/****************************************************************************
【功能说明】系统主函数
****************************************************************************/
void Main(void)
{	

    rSYSCFG = SYSCFG_8KB;		//使用8K字节的指令缓存
	rNCACHBE0 = ((unsigned int)(Non_Cache_End>>12)<<16)|(Non_Cache_Start>>12); 
    //在上面的数据区域不使用高速缓存
	
	Port_Init();		//IO端口功能、方向设定

#if (defined FS44B0)||(defined ST44B0)
	rPCONC &= ~(0xf<<16);
	rPCONC |= 0x5<<16;		//FS4B0,ST44B0中GPC8,9作LCD控制
	rPDATC |= (1<<8);		//LCD-OFF
	rPDATC |= (1<<9);		//1 for ST44B0, 0 for FS44B0 BACK-LIGHT ON
#endif
	
	rPCONG &= 0x00ff;
	
	if(LoadEnv(0, NULL)) {
		MCLK_M = 114; MCLK_P = 8; MCLK_S = 1;
		ChangePllValue(MCLK_M,MCLK_P,MCLK_S);	//修改系统主频为61MHz
		SERIAL_BAUD = 115200;
		Uart_Init(0,SERIAL_BAUD);		//异步串行口初始化，设置波特率为115200
		IP_ADDRESS = IP4_ADDR(192,168,0,100);
		MASK_ADDRESS = IP4_ADDR(255,255,255,0);
		GATE_ADDRESS = IP4_ADDR(192,168,0,1);
	}
	
	Delay(0);		//利用系统时钟校准延时函数
	Led_Disp();		//LED来回闪烁显示 

	NodeInit();
	NetIntPreInit();
	ArpInit();	

	Uart_Select(0);
	Uart_Printf("\n **************************************\n");
	Uart_Printf("*                                       *\n");
	Uart_Printf("*   BIOS for FS44B0 CORE Board V2.00    *\n");
	Uart_Printf("*       Http://www.uCdragon.com         *\n");
	Uart_Printf("*                                       *\n");
	Uart_Printf(" ***************************************\n");
	GetFlashID();
	GetNandFlashChip();
//	Uart_Printf("IP  address : %u.%u.%u.%u\n", (IP_ADDRESS>>24)&0xff, (IP_ADDRESS>>16)&0xff, (IP_ADDRESS>>8)&0xff, IP_ADDRESS&0xff);
	Uart_Printf("Build  date : %s--%s\n", __DATE__, __TIME__);
//	Uart_Printf(__DATE__);
//	Uart_Printf( "--" );
//	Uart_Printf(__TIME__);
//	Uart_Printf("\n");
//	RtcGetTime(&SysTime);
//	Uart_Printf("Current date: %d-%x-%x %s\n", SysTime.year, SysTime.month, SysTime.day, WeekDay[SysTime.weekday]);
//	Uart_Printf("Current time: %2x:%2x:%2x\n", SysTime.hour, SysTime.min, SysTime.sec);
	
	ShellIn();
}
//***************************************************************************