txjunit1.~pas

小区抄表系统

unit txjUnit1;
interface

uses
  ADODB, IniFiles, Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, StdCtrls, OleCtrls, MSCommLib_TLB, ExtCtrls, DB;

type
  Ttongxinji = class(TForm)
    Label1: TLabel;
    ListBox1: TListBox;
    Label2: TLabel;
    Button1: TButton;
    Timer1: TTimer;
    MSComm1: TMSComm;
    Button2: TButton;
    ADOCommand1: TADOCommand;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label6: TLabel;
    ListBox2: TListBox;
    ListBox4: TListBox;
    ListBox5: TListBox;
    ListBox3: TListBox;
    Label8: TLabel;
    ADOTable1: TADOTable;
    Label9: TLabel;
    procedure Button1Click(Sender: TObject);
    procedure Timer1Timer(Sender: TObject);
    procedure MSComm1Comm(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure Button2Click(Sender: TObject);
   // procedure Button3Click(Sender: TObject);
    procedure Timer2Timer(Sender: TObject);
  private
    { Private declarations }
  public
    { Public declarations }
  end;

var
  gostart : boolean;
  tongxinji: Ttongxinji;
  g_connection : TAdoConnection = nil; //与数据库的连接对象，供系统中其他数据控件与数据库连接使用
  Bresult: boolean =True;
  nCount:integer =0;      //参数序号
  shebexuha:integer =0;   //1为A栋；2为B栋;3为C栋
  last:array[1..3,1..5,1..3] of string;
  tCount:array[1..3,1..5,1..3] of integer;

implementation

{$R *.dfm}
Procedure TimeDelay(DT:DWORD);
var
  TT:DWORD;
begin
  TT:=GetTickCount();
  while GetTickCount()-TT<DT do
    Application.ProcessMessages;
end;

procedure Ttongxinji.Button1Click(Sender: TObject);
begin
   timer1.Enabled := False;
   close;
end;

procedure Ttongxinji.Timer1Timer(Sender: TObject);
var
   str1:string;

begin
   //str1:=inttostr(nCount);
   label9.Caption := DateToStr (Date());
   str1:='读A栋';
   if MSComm1.PortOpen then begin
      MSComm1.Output:=str1;
      ListBox1.Items.Add(str1);
  end
  else
     Messagedlg('通信端口1未打开！',mtError,[mbok],0);
  TimeDelay(10000);

  str1 := MSComm1.Input;
  while str1 <> 'A!' do
  Application.ProcessMessages;
  str1:='读B栋';
   if MSComm1.PortOpen then begin
      MSComm1.Output:=str1;
      ListBox1.Items.Add(str1);
  end
  else
     Messagedlg('通信端口1未打开！',mtError,[mbok],0);
   TimeDelay(9000);
     while str1 <> 'B!' do
  Application.ProcessMessages;
  str1:='读C栋';
   if MSComm1.PortOpen then begin
      MSComm1.Output:=str1;
      ListBox1.Items.Add(str1);
  end
  else
     Messagedlg('通信端口1未打开！',mtError,[mbok],0);
end;

procedure Ttongxinji.MSComm1Comm(Sender: TObject);
var
  ReceBuf:string;
  strSql:string;
  strDate:string;
  strTime:string;
  canshuming:string;
  bianhao:string;
  tishi:string;
  shishu : integer;

begin
  ReceBuf := Trim(MSComm1.Input);


  if ReceBuf = 'A!' then
  exit;

  if ReceBuf = 'B!' then
  exit;
  strDate:= DateToStr(Date());
  strTime:= TimeToStr(Time());
  if ReceBuf='A栋:' then begin
     shebexuha:=1;
     nCount:=0;
     exit;
  end
  else if ReceBuf='B栋:' then begin

     shebexuha:=2;
     nCount:=0;
     exit;
  end
  else if ReceBuf='C栋:' then begin
     shebexuha:=3;
     nCount:=0;
     exit;
  end;

  if shebexuha=1 then begin
     nCount:=nCount+1;
     if nCount=1 then begin
     canshuming:='水表' ;
     ListBox2.Items.Add('A1');
     ListBox3.Items.Add(ReceBuf);
     if ReceBuf=last[1][1][1] then tCount[1][1][1]:=tCount[1][1][1]+1
     else begin
     last[1][1][1]:=ReceBuf;
     tCount[1][1][1]:=0;
     end;
     end;
     if nCount=2 then begin
     canshuming:='电表' ;
     ListBox4.Items.Add(ReceBuf);
     if ReceBuf=last[1][1][2] then tCount[1][1][2]:=tCount[1][1][2]+1
     else begin
     last[1][1][2]:=ReceBuf;
     tCount[1][1][2]:=0;
     end;
     end;
     if nCount=3 then begin
     canshuming:='煤气表' ;
     ListBox5.Items.Add(ReceBuf);
     if ReceBuf=last[1][1][3] then tCount[1][1][3]:=tCount[1][1][3]+1
     else begin
     last[1][1][3]:=ReceBuf;
     tCount[1][1][3]:=0;
     end;
     end;
   if nCount=4 then begin
     canshuming:='水表' ;
     ListBox1.Items.Add('  ');
     ListBox2.Items.Add('A2');
     ListBox3.Items.Add(ReceBuf);
     if ReceBuf=last[1][2][1] then tCount[1][2][1]:=tCount[1][2][1]+1
     else begin
     last[1][2][1]:=ReceBuf;
     tCount[1][2][1]:=0;
     end;
     end;
     if nCount=5 then begin
     canshuming:='电表' ;
     ListBox4.Items.Add(ReceBuf);
     if ReceBuf=last[1][2][2] then tCount[1][2][2]:=tCount[1][2][2]+1
     else begin
     last[1][2][2]:=ReceBuf;
     tCount[1][2][2]:=0;
     end;
     end;
     if nCount=6 then begin
     canshuming:='煤气表' ;
     ListBox5.Items.Add(ReceBuf);
     if ReceBuf=last[1][2][3] then tCount[1][2][3]:=tCount[1][2][3]+1
     else begin
     last[1][2][3]:=ReceBuf;
     tCount[1][2][3]:=0;
     end;
     end;
   if nCount=7 then begin
     canshuming:='水表' ;
     ListBox1.Items.Add('  ');
     ListBox2.Items.Add('A3');
     ListBox3.Items.Add(ReceBuf);
     if ReceBuf=last[1][3][1] then tCount[1][3][1]:=tCount[1][3][1]+1
     else begin
     last[1][3][1]:=ReceBuf;
     tCount[1][3][1]:=0;
     end;
     end;
     if nCount=8 then begin
     canshuming:='电表' ;
     ListBox4.Items.Add(ReceBuf);
     if ReceBuf=last[1][3][2] then tCount[1][3][2]:=tCount[1][3][2]+1
     else begin
     last[1][3][2]:=ReceBuf;
     tCount[1][3][2]:=0;
     end;
     end;
     if nCount=9 then begin
     canshuming:='煤气表' ;
     ListBox5.Items.Add(ReceBuf);
     if ReceBuf=last[1][3][3] then tCount[1][3][3]:=tCount[1][3][3]+1
     else begin
     last[1][3][3]:=ReceBuf;
     tCount[1][3][3]:=0;
     end;
     end;
    //else shebexuha:=0;


     if nCount >=7 then begin
      bianhao:='A3' ;
      if ((tCount[1][3][1]>=2)and(tCount[1][3][2]>=2)and(tCount[1][3][3]>=2))then
     tishi:='异常'
     else
     tishi:='正常'
      end
     else if nCount>=4 then begin
      bianhao:='A2' ;
      if ((tCount[1][2][1]>=2)and(tCount[1][2][2]>=2)and(tCount[1][2][3]>=2))then
     tishi:='异常'
     else
     tishi:='正常'
      end
     else begin
      bianhao:='A1' ;
      if ((tCount[1][1][1]>=2)and(tCount[1][1][2]>=2)and(tCount[1][1][3]>=2))then
     tishi:='异常'
     else
     tishi:='正常'
     end;



   shishu := strtoint(ReceBuf);
     strSql:='Insert into 数据信息(编号,表名,示数,记录时间,记录日期,告警提示)';
     strSql:=strSql + 'Values(:a,:b,:c,:d,:e,:f)';
     self.ADOCommand1.CommandText:=strSql;
     self.ADOCommand1.Parameters.ParamByName('a').Value:=bianhao;
     self.ADOCommand1.Parameters.ParamByName('b').Value:=canshuming;
     self.ADOCommand1.Parameters.ParamByName('c').Value :=shishu;
      self.ADOCommand1.Parameters.ParamByName('d').Value:=strTime;
      self.ADOCommand1.Parameters.ParamByName('e').Value:=strDate;
      self.ADOCommand1.Parameters.ParamByName('f').Value:=tishi;
     self.ADOCommand1.Execute;
     exit;
  end;


     if shebexuha=2 then begin
     nCount:=nCount+1;
     if nCount=1 then begin
     canshuming:='水表' ;
     ListBox2.Items.Add('B1');
     ListBox3.Items.Add(ReceBuf);
     if ReceBuf=last[2][1][1] then tCount[2][1][1]:=tCount[2][1][1]+1
     else begin
     last[2][1][1]:=ReceBuf;
     tCount[2][1][1]:=0;
     end;
     end;
     if nCount=2 then begin
     canshuming:='电表' ;
     ListBox4.Items.Add(ReceBuf);
     if ReceBuf=last[2][1][2] then tCount[2][1][2]:=tCount[2][1][2]+1
     else begin
     last[2][1][2]:=ReceBuf;
     tCount[2][1][2]:=0;
     end;
     end;
     if nCount=3 then begin
     canshuming:='煤气表' ;
     ListBox5.Items.Add(ReceBuf);
     if ReceBuf=last[2][1][3] then tCount[2][1][3]:=tCount[2][1][3]+1
     else begin
     last[2][1][3]:=ReceBuf;
     tCount[2][1][3]:=0;
     end;
     end;
   if nCount=4 then begin
     canshuming:='水表' ;
     ListBox1.Items.Add('  ');
     ListBox2.Items.Add('B2');
     ListBox3.Items.Add(ReceBuf);
     if ReceBuf=last[2][2][1] then tCount[2][2][1]:=tCount[2][2][1]+1
     else begin
     last[2][2][1]:=ReceBuf;
     tCount[2][2][1]:=0;
     end;
     end;
     if nCount=5 then begin
     canshuming:='电表' ;
     ListBox4.Items.Add(ReceBuf);
     if ReceBuf=last[2][2][2] then tCount[2][2][2]:=tCount[2][2][2]+1
     else begin
     last[2][2][2]:=ReceBuf;
     tCount[2][2][2]:=0;