serialize.h

一些基于IRA环境开发的zigbee实例程序

/****** Header File for support of STFL-I based Serial Flash Memory Driver *****

   Filename:    Serialize.h
   Description: Header file for Serialize.c
                Consult also the C file for more details.

   Version:     1.0
   Date:        08-11-2004
   Authors:     Tan Zhi, STMicroelectronics, Shanghai (China)
   Copyright (c) 2004 STMicroelectronics.

   THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
   CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A
   RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR
   CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH
   SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN
   IN CONNECTION WITH THEIR PRODUCTS.
********************************************************************************

   Version History.
   Ver.   Date      Comments

   1.0   08/11/2004   Initial release

*******************************************************************************/

#ifndef _SERIALIZE_H_
#define _SERIALIZE_H_

#include "dataflash.h"

#define ptrNull 0   // a null pointer

#define True  1
#define False 0
typedef unsigned char Bool;


// mask bit definitions for SPI master side configuration
enum
{
    MaskBit_Trans                          = 0x01,  // mask bit for Transfer enable/disable
    MaskBit_Recv                           = 0x02,  // mask bit for Receive enable/disable
    MaskBit_Trans_Relevant                 = 0x04,  // check whether MaskBit_Trans is necessary
    MaskBit_Recv_Relevant                  = 0x08,  // check whether MaskBit_Recv is necessary

    MaskBit_SlaveSelect                    = 0x10,  // mask bit for Slave Select/Deselect
    MaskBit_SelectSlave_Relevant           = 0x20,  // check whether MaskBit_SelectSlave is necessary

};

// Acceptable values for SPI master side configuration
typedef enum _SpiMasterConfigOptions
{
    enumNull                               = 0,     // do nothing
    enumEnableTransOnly                    = 0x05,  // enable transfer
    enumEnableRecvOnly                     = 0x0A,  // enable receive
    enumEnableTansRecv                     = 0x0F,  // enable transfer & receive

    enumEnableTransOnly_SelectSlave        = 0x35,  // enable transfer and select slave
    enumEnableRecvOnly_SelectSlave         = 0x3A,  // enable receive and select slave
    enumEnableTansRecv_SelectSlave         = 0x3F,  // enable transfer & receive and select slave

    enumDisableTransOnly                   = 0x04,  // disable transfer and deselect slave
    enumDisableRecvOnly                    = 0x08,  // disable receive
    enumDisableTransRecv                   = 0x0C,  // disable transfer & receive

    enumDisableTransOnly_DeSelectSlave     = 0x24,  // disable transfer and deselect slave
    enumDisableRecvOnly_DeSelectSlave      = 0x28,  // disable receive and deselect slave
    enumDisableTansRecv_DeSelectSlave      = 0x2C   // disable transfer & receive and deselect slave

}SpiMasterConfigOptions;

// char stream definition for
typedef struct _structCharStream
{
    ST_uint8* pChar;                                // buffer address that holds the streams
    ST_uint32 length;                               // length of the stream in bytes
}CharStream;

#ifdef CC2430_BOOT_CODE
__near_func
#endif
void ConfigureSpiMaster(
                        SpiMasterConfigOptions opt  // configuration options
                        );
#ifdef CC2430_BOOT_CODE
__near_func
#endif
Bool Serialize(
               const CharStream* char_stream_send,   // char stream to be sent to the memory(incl. instruction, address etc)
               CharStream* char_stream_recv,         // char stream to be received from the memory
               SpiMasterConfigOptions optBefore,     // Pre-Configurations on the SPI master side
               SpiMasterConfigOptions optAfter       // Post-Configurations on the SPI master side
              );

#ifdef CC2430_BOOT_CODE
__near_func
#endif
void DF_spiInit( int8 (**readWrite)(uint8, uint32, uint8 *, uint16) );

#endif //end of file