⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 vac-ops.h

📁 ARM 嵌入式 系统 设计与实例开发 实验教材 二源码
💻 H
字号:
/* $Id: vac-ops.h,v 1.13 1998/01/30 10:59:59 jj Exp $ */#ifndef _SPARC_VAC_OPS_H#define _SPARC_VAC_OPS_H/* vac-ops.h: Inline assembly routines to do operations on the Sparc *            VAC (virtual address cache) for the sun4c. * * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu) */#include <linux/config.h>#include <asm/sysen.h>#include <asm/contregs.h>#include <asm/asi.h>/* The SUN4C models have a virtually addressed write-through * cache. * * The cache tags are directly accessible through an ASI and * each have the form: * * ------------------------------------------------------------ * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ | * ------------------------------------------------------------ *  31 25  24   22     21     20     19    18 16  15   2  1  0 * * MBZ: These bits are either unused and/or reserved and should *      be written as zeroes. * * CONTEXT: Records the context to which this cache line belongs. * * WRITE: A copy of the writable bit from the mmu pte access bits. * * PRIV: A copy of the privileged bit from the pte access bits. * * VALID: If set, this line is valid, else invalid. * * TagID: Fourteen bits of tag ID. * * Every virtual address is seen by the cache like this: * * ---------------------------------------- * |  RESV  | TagID | LINE | BYTE-in-LINE | * ---------------------------------------- *  31    30 29   16 15   4 3            0 * * RESV: Unused/reserved. * * TagID: Used to match the Tag-ID in that vac tags. * * LINE: Which line within the cache * * BYTE-in-LINE: Which byte within the cache line. *//* Sun4c VAC Tags */#define S4CVACTAG_CID      0x01c00000#define S4CVACTAG_W        0x00200000#define S4CVACTAG_P        0x00100000#define S4CVACTAG_V        0x00080000#define S4CVACTAG_TID      0x0000fffc/* Sun4c VAC Virtual Address *//* These aren't used, why bother? (Anton) */#if 0#define S4CVACVA_TID       0x3fff0000#define S4CVACVA_LINE      0x0000fff0#define S4CVACVA_BIL       0x0000000f#endif/* The indexing of cache lines creates a problem.  Because the line * field of a virtual address extends past the page offset within * the virtual address it is possible to have what are called * 'bad aliases' which will create inconsistencies.  So we must make * sure that within a context that if a physical page is mapped * more than once, that 'extra' line bits are the same.  If this is * not the case, and thus is a 'bad alias' we must turn off the * cacheable bit in the pte's of all such pages. */#ifdef CONFIG_SUN4#define S4CVAC_BADBITS     0x0001e000#else#define S4CVAC_BADBITS    0x0000f000#endif/* The following is true if vaddr1 and vaddr2 would cause * a 'bad alias'. */#define S4CVAC_BADALIAS(vaddr1, vaddr2) \        ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \	 (S4CVAC_BADBITS))/* The following structure describes the characteristics of a sun4c * VAC as probed from the prom during boot time. */struct sun4c_vac_props {	unsigned int num_bytes;     /* Size of the cache */	unsigned int num_lines;     /* Number of cache lines */	unsigned int do_hwflushes;  /* Hardware flushing available? */	enum { NONE, WRITE_THROUGH,	    WRITE_BACK } type;      /* What type of VAC? */	unsigned int linesize;      /* Size of each line in bytes */	unsigned int log2lsize;     /* log2(linesize) */	unsigned int on;            /* VAC is enabled */};extern struct sun4c_vac_props sun4c_vacinfo;extern void sun4c_flush_all(void);/* sun4c_enable_vac() enables the sun4c virtual address cache. */extern __inline__ void sun4c_enable_vac(void){  __asm__ __volatile__("lduba [%0] %1, %%g1\n\t"		       "or    %%g1, %2, %%g1\n\t"		       "stba  %%g1, [%0] %1\n\t" : :		       "r" ((unsigned int) AC_SENABLE),		       "i" (ASI_CONTROL), "i" (SENABLE_CACHE) :		       "g1");  sun4c_vacinfo.on = 1;}/* sun4c_disable_vac() disables the virtual address cache. */extern __inline__ void sun4c_disable_vac(void){  __asm__ __volatile__("lduba [%0] %1, %%g1\n\t"		       "andn  %%g1, %2, %%g1\n\t"		       "stba  %%g1, [%0] %1\n\t" : :		       "r" ((unsigned int) AC_SENABLE),		       "i" (ASI_CONTROL), "i" (SENABLE_CACHE) :		       "g1");  sun4c_vacinfo.on = 0;}#endif /* !(_SPARC_VAC_OPS_H) */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -