⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 process.c

📁 ARM 嵌入式 系统 设计与实例开发 实验教材 二源码
💻 C
字号:
/* $Id: process.c,v 1.22 2001/11/13 09:40:43 orjanf Exp $ *  *  linux/arch/cris/kernel/process.c * *  Copyright (C) 1995  Linus Torvalds *  Copyright (C) 2000, 2001  Axis Communications AB * *  Authors:   Bjorn Wesen (bjornw@axis.com) * *  $Log: process.c,v $ *  Revision 1.22  2001/11/13 09:40:43  orjanf *  Added dump_fpu (needed for core dumps). * *  Revision 1.21  2001/11/12 18:26:21  pkj *  Fixed compiler warnings. * *  Revision 1.20  2001/10/03 08:21:39  jonashg *  cause_of_death does not exist if CONFIG_SVINTO_SIM is defined. * *  Revision 1.19  2001/09/26 11:52:54  bjornw *  INIT_MMAP is gone in 2.4.10 * *  Revision 1.18  2001/08/21 21:43:51  hp *  Move last watchdog fix inside #ifdef CONFIG_ETRAX_WATCHDOG * *  Revision 1.17  2001/08/21 13:48:01  jonashg *  Added fix by HP to avoid oops when doing a hard_reset_now. * *  Revision 1.16  2001/06/21 02:00:40  hp *  	* entry.S: Include asm/unistd.h. *  	(_sys_call_table): Use section .rodata, not .data. *  	(_kernel_thread): Move from... *  	* process.c: ... here. *  	* entryoffsets.c (VAL): Break out from... *  	(OF): Use VAL. *  	(LCLONE_VM): New asmified value from CLONE_VM. * *  Revision 1.15  2001/06/20 16:31:57  hp *  Add comments to describe empty functions according to review. * *  Revision 1.14  2001/05/29 11:27:59  markusl *  Fixed so that hard_reset_now will do reset even if watchdog wasn't enabled * *  Revision 1.13  2001/03/20 19:44:06  bjornw *  Use the 7th syscall argument for regs instead of current_regs * *//* * This file handles the architecture-dependent parts of process handling.. */#define __KERNEL_SYSCALLS__#include <stdarg.h>#include <linux/errno.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/mm.h>#include <linux/stddef.h>#include <linux/unistd.h>#include <linux/ptrace.h>#include <linux/slab.h>#include <linux/user.h>#include <linux/a.out.h>#include <linux/elfcore.h>#include <linux/interrupt.h>#include <linux/delay.h>#include <asm/uaccess.h>#include <asm/pgtable.h>#include <asm/system.h>#include <asm/io.h>#include <asm/processor.h>#include <linux/smp.h>//#define DEBUG/* * Initial task structure. Make this a per-architecture thing, * because different architectures tend to have different * alignment requirements and potentially different initial * setup. */static struct fs_struct init_fs = INIT_FS;static struct files_struct init_files = INIT_FILES;static struct signal_struct init_signals = INIT_SIGNALS;struct mm_struct init_mm = INIT_MM(init_mm);/* * Initial task structure. * * We need to make sure that this is 8192-byte aligned due to the * way process stacks are handled. This is done by having a special * "init_task" linker map entry.. */union task_union init_task_union       __attribute__((__section__(".data.init_task"))) =             { INIT_TASK(init_task_union.task) };/* * The hlt_counter, disable_hlt and enable_hlt is just here as a hook if * there would ever be a halt sequence (for power save when idle) with * some largish delay when halting or resuming *and* a driver that can't * afford that delay.  The hlt_counter would then be checked before * executing the halt sequence, and the driver marks the unhaltable * region by enable_hlt/disable_hlt. */static int hlt_counter=0;void disable_hlt(void){	hlt_counter++;}void enable_hlt(void){	hlt_counter--;} int cpu_idle(void *unused){	while(1) {		current->counter = -100;		schedule();	}}/* if the watchdog is enabled, we can simply disable interrupts and go * into an eternal loop, and the watchdog will reset the CPU after 0.1s * if on the other hand the watchdog wasn't enabled, we just enable it and wait */void hard_reset_now (void){	/*	 * Don't declare this variable elsewhere.  We don't want any other	 * code to know about it than the watchdog handler in entry.S and	 * this code, implementing hard reset through the watchdog.	 */#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)	extern int cause_of_death;#endif	printk("*** HARD RESET ***\n");	cli();#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)	cause_of_death = 0xbedead;#else	/* Since we dont plan to keep on reseting the watchdog,	   the key can be arbitrary hence three */	*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |		IO_STATE(R_WATCHDOG, enable, start);#endif	while(1) /* waiting for RETRIBUTION! */ ;}void machine_restart(void){	hard_reset_now();}/* * Similar to machine_power_off, but don't shut off power.  Add code * here to freeze the system for e.g. post-mortem debug purpose when * possible.  This halt has nothing to do with the idle halt. */void machine_halt(void){}/* If or when software power-off is implemented, add code here.  */void machine_power_off(void){}/* * When a process does an "exec", machine state like FPU and debug * registers need to be reset.  This is a hook function for that. * Currently we don't have any such state to reset, so this is empty. */void flush_thread(void){}asmlinkage void ret_from_sys_call(void);/* setup the child's kernel stack with a pt_regs and switch_stack on it. * it will be un-nested during _resume and _ret_from_sys_call when the * new thread is scheduled. * * also setup the thread switching structure which is used to keep * thread-specific data during _resumes. * */int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,		unsigned long unused,		struct task_struct *p, struct pt_regs *regs){	struct pt_regs * childregs;	struct switch_stack *swstack;		/* put the pt_regs structure at the end of the new kernel stack page and fix it up	 * remember that the task_struct doubles as the kernel stack for the task	 */	childregs = user_regs(p);	*childregs = *regs;  /* struct copy of pt_regs */	childregs->r10 = 0;  /* child returns 0 after a fork/clone */		/* put the switch stack right below the pt_regs */	swstack = ((struct switch_stack *)childregs) - 1;	swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */	/* we want to return into ret_from_sys_call after the _resume */	swstack->return_ip = (unsigned long) ret_from_sys_call;		/* fix the user-mode stackpointer */	p->thread.usp = usp;		/* and the kernel-mode one */	p->thread.ksp = (unsigned long) swstack;#ifdef DEBUG	printk("copy_thread: new regs at 0x%p, as shown below:\n", childregs);	show_registers(childregs);#endif	return 0;}/* * fill in the user structure for a core dump.. */void dump_thread(struct pt_regs * regs, struct user * dump){#if 0	int i;	/* changed the size calculations - should hopefully work better. lbt */	dump->magic = CMAGIC;	dump->start_code = 0;	dump->start_stack = regs->esp & ~(PAGE_SIZE - 1);	dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;	dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;	dump->u_dsize -= dump->u_tsize;	dump->u_ssize = 0;	for (i = 0; i < 8; i++)		dump->u_debugreg[i] = current->debugreg[i];  	if (dump->start_stack < TASK_SIZE)		dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;	dump->regs = *regs;	dump->u_fpvalid = dump_fpu (regs, &dump->i387);#endif }/* Fill in the fpu structure for a core dump. */int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu){        return 0;}/*  * Be aware of the "magic" 7th argument in the four system-calls below. * They need the latest stackframe, which is put as the 7th argument by * entry.S. The previous arguments are dummies or actually used, but need * to be defined to reach the 7th argument. * * N.B.: Another method to get the stackframe is to use current_regs(). But * it returns the latest stack-frame stacked when going from _user mode_ and * some of these (at least sys_clone) are called from kernel-mode sometimes * (for example during kernel_thread, above) and thus cannot use it. Thus, * to be sure not to get any surprises, we use the method for the other calls * as well. */asmlinkage int sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,			struct pt_regs *regs){	return do_fork(SIGCHLD, rdusp(), regs, 0);}/* if newusp is 0, we just grab the old usp */asmlinkage int sys_clone(unsigned long newusp, unsigned long flags,			 long r12, long r13, long mof, long srp,			 struct pt_regs *regs){	if (!newusp)		newusp = rdusp();	return do_fork(flags, newusp, regs, 0);}/* vfork is a system call in i386 because of register-pressure - maybe * we can remove it and handle it in libc but we put it here until then. */asmlinkage int sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,			 struct pt_regs *regs){        return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0);}/* * sys_execve() executes a new program. */asmlinkage int sys_execve(const char *fname, char **argv, char **envp,			  long r13, long mof, long srp, 			  struct pt_regs *regs){	int error;	char *filename;	filename = getname(fname);	error = PTR_ERR(filename);	if (IS_ERR(filename))	        goto out;	error = do_execve(filename, argv, envp, regs);	putname(filename); out:	return error;}/* * These bracket the sleeping functions.. */extern void scheduling_functions_start_here(void);extern void scheduling_functions_end_here(void);#define first_sched     ((unsigned long) scheduling_functions_start_here)#define last_sched      ((unsigned long) scheduling_functions_end_here)unsigned long get_wchan(struct task_struct *p){#if 0	/* YURGH. TODO. */        unsigned long ebp, esp, eip;        unsigned long stack_page;        int count = 0;        if (!p || p == current || p->state == TASK_RUNNING)                return 0;        stack_page = (unsigned long)p;        esp = p->thread.esp;        if (!stack_page || esp < stack_page || esp > 8188+stack_page)                return 0;        /* include/asm-i386/system.h:switch_to() pushes ebp last. */        ebp = *(unsigned long *) esp;        do {                if (ebp < stack_page || ebp > 8184+stack_page)                        return 0;                eip = *(unsigned long *) (ebp+4);                if (eip < first_sched || eip >= last_sched)                        return eip;                ebp = *(unsigned long *) ebp;        } while (count++ < 16);#endif        return 0;}#undef last_sched#undef first_sched

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -