mpmc_pl175.s.svn-base

Spearhead2000 的 USB驱动程序

    MOV		v1, lr      /*; Save lr*/

/*    ;* Program the delay line (2.5 ns) *
//    ;LDR     a1, =SDRAM_INTPUT_CLOCK_DELAY
//    ;MOV     a2, #0x18
//    ;STR     a2, [a1, #0]
    
//    ;LDR     a1, =SDRAM_OUTPUT_CLOCK_DELAY
//    ;MOV     a2, #0x18
//    ;STR     a2, [a1, #0]
    
//    ;* Initial wait to ensure stable power, clock *
//    ;apOS_TIMER_Wait( pInitial->PausePowerUp );
*/
    LDR     a1, =PAUSE_POWER_UP_INIT
    BL      TimerWait
  
/*    ; * Set up Normal Memory Map *
//    ; ((PL175_sRegisters *) eBase)->Control = 
//    ;	apBIT_BUILD( PL175_CONTROL_E, apPL175_DEVICE_ENABLED	     ) |
//    ;	apBIT_BUILD( PL175_CONTROL_L, apPL175_OPERATE_NORMAL_MODE    );
*/    
    LDR     a2, =0x1
    LDR     a1, =MPMCControl
    STR     a2, [a1, #0]

/*    ; * Set Dynamic memory clock enable, issue NOP command
//    ;  * and for Micron SyncFlash set the RP value HIGH
//    ;  *
//    ; ((PL175_sRegisters *) eBase)->DynamicControl =
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_CE,   apPL175_CLK_DRIVEN_HIGH )   |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_CS,   apPL175_CLKOUT_RUNS ) |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_SR,   apPL175_NORMAL_MODE )       |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_SRMCC,  apPL175_CLKOUT_SREF_RUN )   |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_IMCC, apPL175_NCLKOUT_ENABLED )   |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_MCC,  apPL175_CLKOUT_ENABLED )    |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_I,    apPL175_INIT_NOP )	       |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_DC,   apPL175_DLL_HANDSHAKING_DISABLED )  |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_DE,   apPL175_DLL_HANDSHAKING_DISABLED )  |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_DP,   apPL175_NORMAL_OPERATION )  |
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_NRP,  apPL175_RP_HIGH )		|
//    ;	  apBIT_BUILD( PL175_DYNAMIC_CONTROL_RPV,  apPL175_RPVHH_NORMAL );
*/
    LDR     a2, =0x418b
    LDR     a1, =MPMCDynamicControl
    STR     a2, [a1, #0]
    
/*    ; * Wait *
//    ; apOS_TIMER_Wait( pInitial->PauseMemInit );
*/
    LDR     a1, =PAUSE_MEM_INIT
    BL      TimerWait

/*    ;* Issue PALL *
//    ;((PL175_sRegisters *) eBase)->DynamicControl =
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_CE,   apPL175_CLK_DRIVEN_HIGH )   |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_CS,   apPL175_CLKOUT_RUNS ) |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_SR,   apPL175_NORMAL_MODE )       |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_SRMCC,  apPL175_CLKOUT_SREF_RUN )	|
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_IMCC, apPL175_NCLKOUT_ENABLED )   |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_MCC,  apPL175_CLKOUT_ENABLED )    |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_I,    apPL175_INIT_PALL )	      |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_DC,   apPL175_DLL_HANDSHAKING_DISABLED )  |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_DE,   apPL175_DLL_HANDSHAKING_DISABLED )  |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_DP,   apPL175_NORMAL_OPERATION )  |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_NRP,  apPL175_RP_HIGH )	      |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_RPV,  apPL175_RPVHH_NORMAL );
*/
  LDR     a2, =0x410b
    LDR     a1, =MPMCDynamicControl
    STR     a2, [a1, #0]

/*    ; * Set initial refresh timer value *
//    ; ((PL175_sRegisters *) eBase)->DynamicRefresh = PL175_REFRESH_INIT;
*/
    LDR     a2, =0x2
    LDR     a1, =MPMCDynamicRefresh
    STR     a2, [a1, #0]

/*    ; * Wait *
//    ; apOS_TIMER_Wait( pInitial->PauseRefresh );
*/
    LDR     a1, =PAUSE_REFRESH_INIT
    BL      TimerWait

/*    ; * Program the operational value into the refresh timer *
//    ; ((PL175_sRegisters *) eBase)->DynamicRefresh = pInitial->sConfig.DynamicRefreshTime;
*/
    LDR     a2, =PL175_DYNAMIC_REFRESH_TIME_INIT
    LDR     a1, =MPMCDynamicRefresh
    STR     a2, [a1, #0]

/*    ; * Program MPMCConfig register *
//    ; ((PL175_sRegisters *) eBase)->Config =
//    ;     apBIT_BUILD( PL175_CONFIG_N,   pInitial->sConfig.eEndianMode );
*/

    LDR     a2, =PL175_ENDIANITY
    LDR     a1, =MPMCConfig
    STR     a2, [a1, #0]

/*    ; * Program MPMCReadConfig register *
//    ; ((PL175_sRegisters *) eBase)->DynamicReadConfig =
//    ;    apBIT_BUILD( PL175_READ_DATA_SRD , pInitial->sConfig.eReadDataStrategySDR) |
//    ;    apBIT_BUILD( PL175_READ_DATA_SRP , pInitial->sConfig.eReadDataPolaritySDR) |
//    ;    apBIT_BUILD( PL175_READ_DATA_DRD , pInitial->sConfig.eReadDataStrategyDDR) |
//    ;    apBIT_BUILD( PL175_READ_DATA_DRP , pInitial->sConfig.eReadDataPolarityDDR) ;
*/

    LDR     a2, =PL175_DATA_STRATEGY
    LDR     a1, =MPMCDynamicReadConfig
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictRP register *
//    ; ((PL175_sRegisters *) eBase)->DynamictRP = pInitial->sConfig.DynamictRP; 
*/
  
    LDR     a2, =PL175_DYNAMIC_TRP_INIT
    LDR     a1, =MPMCDynamictRP
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictRAS register *
//    ; ((PL175_sRegisters *) eBase)->DynamictRAS = pInitial->sConfig.DynamictRAS;
*/
  
    LDR     a2, =PL175_DYNAMIC_TRAS_INIT
    LDR     a1, =MPMCDynamictRAS
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictSREX register *
//    ; ((PL175_sRegisters *) eBase)->DynamictSREX = pInitial->sConfig.DynamictSREX;
*/
  
    LDR     a2, =PL175_DYNAMIC_TSREX_INIT
    LDR     a1, =MPMCDynamictSREX
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictWR register *
//    ; ((PL175_sRegisters *) eBase)->DynamictWR = pInitial->sConfig.DynamictWR;
*/
  
    LDR     a2, =PL175_DYNAMIC_TWR_INIT
    LDR     a1, =MPMCDynamictWR
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictRC register *
//    ; ((PL175_sRegisters *) eBase)->DynamictRC = pInitial->sConfig.DynamictRC;
*/  
    LDR     a2, =PL175_DYNAMIC_TRC_INIT
    LDR     a1, =MPMCDynamictRC
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictRFC register *
//    ; ((PL175_sRegisters *) eBase)->DynamictRFC = pInitial->sConfig.DynamictRFC;
*/
  
    LDR     a2, =PL175_DYNAMIC_TRFC_INIT
    LDR     a1, =MPMCDynamictRFC
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictXSR register *
//    ; ((PL175_sRegisters *) eBase)->DynamictXSR = pInitial->sConfig.DynamictXSR;
*/
  
    LDR     a2, =PL175_DYNAMIC_TXSR_INIT
    LDR     a1, =MPMCDynamictXSR
    STR     a2, [a1, #0]
  
/*    ; * Program MPMCDynamictRRD register *
//    ; ((PL175_sRegisters *) eBase)->DynamictRRD = pInitial->sConfig.DynamictRRD;
*/
  
    LDR     a2, =PL175_DYNAMIC_TRRD_INIT
    LDR     a1, =MPMCDynamictRRD
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictMRD register *
//    ; ((PL175_sRegisters *) eBase)->DynamictMRD = pInitial->sConfig.DynamictMRD;
*/
  
    LDR     a2, =PL175_DYNAMIC_TMRD_INIT
    LDR     a1, =MPMCDynamictMRD
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamictCDLR register *
//    ; ((PL175_sRegisters *) eBase)->DynamictCDLR = pInitial->sConfig.DynamictCDLR;
*/  
    LDR     a2, =PL175_DYNAMIC_TCDLR_INIT
    LDR     a1, =MPMCDynamictCDLR
    STR     a2, [a1, #0]

/*    ; * Program MPMCStaticExtendedWait register *
//    ; ((PL175_sRegisters *) eBase)->StaticExtendedWait = pInitial->sConfig.StaticExtendedWait;


//    ;;;;;;;;;;;;;;;;;;;;;;;;;;;;
//    ; Program Dynamic memory #0
//    ;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    
//    ; * Program MPMCDynamicRasCas register[] *
//    ; ((PL175_sDynamicRegs *) pMemRegs)->DynamicRasCas =								      
//    ; 	apBIT_BUILD( PL175_DYNAMIC_RASCAS_RAS, ((apPL175_sDynamicConfig *)pMemConfig)->eDynamicRASLatency ) |	      
//    ;	apBIT_BUILD( PL175_DYNAMIC_RASCAS_CAS, ((apPL175_sDynamicConfig *)pMemConfig)->eDynamicCASLatency );	      
*/
  
    LDR     a2, =PL175_RAS_CAS_LATENCY
    LDR     a1, =MPMCDynamicRasCas0
    STR     a2, [a1, #0]

/*    ; * Program MPMCDynamicConfig[] register *									      
//    ; ((PL175_sDynamicRegs *) pMemRegs)->DynamicConfig =								      
//    ;	apBIT_BUILD( PL175_DYNAMIC_CONFIG_MD, ((apPL175_sDynamicConfig *)pMemConfig)->eDynamicMemoryDevice   ) |      
//    ;	apBIT_BUILD( PL175_DYNAMIC_CONFIG_AM, ((apPL175_sDynamicConfig *)pMemConfig)->eDynamicAddressMapping ) |      
//    ;	apBIT_BUILD( PL175_DYNAMIC_CONFIG_P,  ((apPL175_sDynamicConfig *)pMemConfig)->eDynamicWriteProtect   );       
*/
  
    LDR     a2, =PL175_CONFIG
    LDR     a1, =MPMCDynamicConfig0
    STR     a2, [a1, #0]
 
/*    ;* Select command write mode *
//    ;((PL175_sRegisters *) eBase)->DynamicControl =
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_CE,   apPL175_CLK_DRIVEN_HIGH )   |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_CS,   apPL175_CLKOUT_RUNS ) |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_SR,   apPL175_NORMAL_MODE )       |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_SRMCC,  apPL175_CLKOUT_SREF_RUN )	|
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_IMCC, apPL175_NCLKOUT_ENABLED )   |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_MCC,  apPL175_CLKOUT_ENABLED )    |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_I,    apPL175_INIT_MODE )	      |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_DC,   apPL175_DLL_HANDSHAKING_DISABLED )  |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_DE,   apPL175_DLL_HANDSHAKING_DISABLED )  |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_DP,   apPL175_NORMAL_OPERATION )  |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_NRP,  apPL175_RP_HIGH )	      |
//    ;	 apBIT_BUILD( PL175_DYNAMIC_CONTROL_RPV,  apPL175_RPVHH_NORMAL );