📄 omap2420.h
字号:
/* * Copyright (C) 2005 Texas Instruments, <www.ti.com> * * (C) Copyright 2004 * Texas Instruments, <www.ti.com> * Richard Woodruff <r-woodruff2@ti.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#ifndef _OMAP2420_SYS_H_#define _OMAP2420_SYS_H_#include <asm/arch/sizes.h>#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))#define __raw_readb(a) (*(volatile unsigned char *)(a))#define __raw_readw(a) (*(volatile unsigned short *)(a))#define __raw_readl(a) (*(volatile unsigned int *)(a)) /* * 2420 specific Section *//* CONTROL */#define OMAP2420_CTRL_BASE (0x48000000)#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)/* TAP information */#define OMAP2420_TAP_BASE (0x48014000)#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)/* GPMC */#define OMAP2420_GPMC_BASE (0x6800A000)#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10)#define GPMC_SYSSTATUS (OMAP2420_GPMC_BASE+0x14)#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C)#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40)#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50)#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60)#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64)#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68)#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C)#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70)#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74)#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78)#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90)#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94)#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98)#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C)#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)/* SMS */#define OMAP2420_SMS_BASE 0x68008000#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10)/* SDRC */#define OMAP2420_SDRC_BASE 0x68009000#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)#define SDRC_DLLA_STATUS (OMAP2420_SDRC_BASE+0x64)#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70)#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80)#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84)#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)#define SDRC_MCFG_1 (OMAP2420_SDRC_BASE+0xB0)#define SDRC_MR_1 (OMAP2420_SDRC_BASE+0xB4)#define SDRC_EMR2_1 (OMAP2420_SDRC_BASE+0xBC)#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4)#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8)#define SDRC_RFR_CTRL1 (OMAP2420_SDRC_BASE+0xD4)#define SDRC_MANUAL_1 (OMAP2420_SDRC_BASE+0xD8)#define OMAP2420_SDRC_CS0 0x80000000#define OMAP2420_SDRC_CS1 0xA0000000#define LOADDLL BIT2#define CMD_NOP 0x0#define CMD_PRECHARGE 0x1#define CMD_AUTOREFRESH 0x2#define CMD_ENTR_PWRDOWN 0x3#define CMD_EXIT_PWRDOWN 0x4#define CMD_ENTR_SRFRSH 0x5#define CMD_CKE_HIGH 0x6#define CMD_CKE_LOW 0x7#define SOFTRESET BIT1#define SMART_IDLE (0x2 << 3)#define REF_ON_IDLE (0x1 << 6)/* UART */#define OMAP2420_UART1 0x4806A000#define OMAP2420_UART2 0x4806C000#define OMAP2420_UART3 0x4806E000/* General Purpose Timers */#define OMAP2420_GPT1 0x48028000#define OMAP2420_GPT2 0x4802A000#define OMAP2420_GPT3 0x48078000#define OMAP2420_GPT4 0x4807A000#define OMAP2420_GPT5 0x4807C000#define OMAP2420_GPT6 0x4807E000#define OMAP2420_GPT7 0x48080000#define OMAP2420_GPT8 0x48082000#define OMAP2420_GPT9 0x48084000#define OMAP2420_GPT10 0x48086000#define OMAP2420_GPT11 0x48088000#define OMAP2420_GPT12 0x4808A000/* timer regs offsets (32 bit regs) */#define TIDR 0x0 /* r */#define TIOCP_CFG 0x10 /* rw */#define TISTAT 0x14 /* r */#define TISR 0x18 /* rw */#define TIER 0x1C /* rw */#define TWER 0x20 /* rw */#define TCLR 0x24 /* rw */#define TCRR 0x28 /* rw */#define TLDR 0x2C /* rw */#define TTGR 0x30 /* rw */#define TWPS 0x34 /* r */#define TMAR 0x38 /* rw */#define TCAR1 0x3c /* r */#define TSICR 0x40 /* rw */#define TCAR2 0x44 /* r *//* WatchDog Timers (1 secure, 3 GP) */#define WD1_BASE 0x48020000#define WD2_BASE 0x48022000#define WD3_BASE 0x48024000#define WD4_BASE 0x48026000#define WWPS 0x34 /* r */#define WSPR 0x48 /* rw */#define WD_UNLOCK1 0xAAAA#define WD_UNLOCK2 0x5555/* PRCM */#define OMAP2420_CM_BASE 0x48008000#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140)#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200)#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204)#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210)#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214)#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240)#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440)#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244)#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340)#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450)#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500)#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520)#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540)#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544)#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840)/* * H4 specific Section *//* * The 2420's chip selects are programmable. The mask ROM * does configure CS0 to 0x08000000 before dispatch. So, if * you want your code to live below that address, you have to * be prepared to jump though hoops, to reset the base address. */#if defined(CONFIG_OMAP2420H4)/* GPMC */#ifdef CONFIG_VIRTIO_A /* Pre version B */# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */# define H4_CS1_BASE 0x04000000 /* debug board */# define H4_CS2_BASE 0x0A000000 /* wifi board */#else# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */# define H4_CS1_BASE 0x08000000 /* debug board */# define H4_CS2_BASE 0x0A000000 /* wifi board */#endif/* base address for indirect vectors (internal boot mode) */#define SRAM_OFFSET0 0x40000000#define SRAM_OFFSET1 0x00200000#define SRAM_OFFSET2 0x0000F800#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)#define LOW_LEVEL_SRAM_STACK 0x4020FFFC#define PERIFERAL_PORT_BASE 0x480FE003/* FPGA on Debug board.*/#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)#endif /* endif CONFIG_2420H4 */#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -