main.c

msp430液晶（并行绿光12864）C驱动 用msp430F247成功测试

#include "Includes.h"


void Delay(unsigned int i)
{
    while(i--);
}

void Target_Init(void)                       // 目标板初始化
{
    unsigned int i;    
    WDTCTL = WDTPW+WDTHOLD;                   // 禁止看门狗
    BCSCTL1 &= ~XT2OFF;                       // 激活高频 XT2 
    BCSCTL3 |= XT2S_2;                        // 选用模式2 2-16MHz
    
    do                                        // 等待锁相环锁定频率
    {
        IFG1 &= ~OFIFG;                           
        for (i = 0x47FF; i > 0; i--);         
    }
    while ((IFG1 & OFIFG));                   
    BCSCTL2 |= SELM_2;                        // MCLK = XT2 HF XTAL (safe)
    
    // P4.0~P4.7 are LCD DataBUS
    P4DIR = 0x0ff;
    // P5.0~P5.5 are LCD control signals
    P5DIR = 0x0ff;
}

void main(void)
{
    Target_Init( );
    GUI_Initialize();
    
     GUI_HLine(0,0,127,0x01);           // 画横线
     GUI_HLine(0,18,127,0x01);
     GUI_HLine(0,36,127,0x01);
     GUI_HLine(0,54,127,0x01);
     GUI_HLine(0,63,127,0x01);
                                        // 画竖线
     GUI_RLine(0, 0, 63, 0x01);
     GUI_RLine(33, 0, 54, 0x01);
     GUI_RLine(127, 0, 63, 0x01);
     
     GUI_PutHZ(1,1,shun,16,16);
     GUI_PutHZ(17,1,shi,16,16);
      
     while(1);
}