alarmconfiguration.mib

EPON MIB库源码

-- File Name : AlarmConfiguration.mib
-- Date      : Wed Jul 16 08:37:19 CST 2008
-- Author    : AdventNet Agent Toolkit C Edition - MibEditor 6

--
-- AlarmConfiguration.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Wednesday, July 12, 2006 at 18:01:44
--
--  AlarmConfiguration.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Sunday, June 25, 2006 at 11:42:12
-- 
--  AlarmConfiguration.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Wednesday, April 26, 2006 at 15:52:13
-- 
--  AlarmConfiguration.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Wednesday, April 26, 2006 at 15:01:58
-- 
--  AlarmConfiguration.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Tuesday, January 10, 2006 at 15:24:31
-- 
--  AlarmConfiguration.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Tuesday, January 03, 2006 at 18:42:11
-- 


FORTO-ALARM-CONFIGURATION-MIB	DEFINITIONS ::= BEGIN
	IMPORTS
		fortoPrivate, FortoOLTIdIndex
			FROM FORTO-MIB
		ifIndex
			FROM IF-MIB
		Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, enterprises, Integer32
			FROM SNMPv2-SMI;

	fortoAlarmConfiguration	MODULE-IDENTITY
		LAST-UPDATED	"190502081355Z"
		ORGANIZATION	"FORTO LTD"
		CONTACT-INFO	"   EMANUEL GRINSPUN"
		DESCRIPTION		"The MIB for ALARM SET UP  "
		REVISION		"190502081355Z"
		DESCRIPTION		"Revisions made by the Interfaces MIB WG."
		::=  {  fortoPrivate  13  }

	fortoAlarmSetting	OBJECT IDENTIFIER
		::=  {  fortoAlarmConfiguration  1  }

	fortoAlarmNotifyObjects	OBJECT IDENTIFIER
		::=  {  fortoAlarmConfiguration  2  }

	fortoAlarmNotification	OBJECT IDENTIFIER
		::=  {  fortoAlarmConfiguration  3  }

	alarmConfigurationTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  AlarmConfigurationEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"This table configures alarm event generation thresholds, overriding previous / default configuration."
		::=  { fortoAlarmSetting  1 }

	alarmConfigurationEntry	OBJECT-TYPE
		SYNTAX		AlarmConfigurationEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"An entry containing management information applicable
				to a particular OLT. The information is for all OLT versions.
				The index is the ifIndex of the OLT and ONU device."
		INDEX		{  ifIndex  }
		::=  { alarmConfigurationTable 1 }

	AlarmConfigurationEntry  ::=  SEQUENCE {
		alarmConfigurationOLTApply  INTEGER,
		alarmConfigurationBERActivation  INTEGER,
		alarmConfigurationBERDirection  INTEGER,
		alarmConfigurationBERThreshold  OCTET STRING,
		alarmConfigurationBERMinimumErrorThreshold  Integer32,
		alarmConfigurationFERActivation  INTEGER,
		alarmConfigurationFERDirection  INTEGER,
		alarmConfigurationFERThreshold  OCTET STRING,
		alarmConfigurationFERMinimumErrorThreshold  Integer32,
		alarmConfigurationSoftwareErrorActivation  INTEGER,
		alarmConfigurationLocalLinkFaultActivation  INTEGER,
		alarmConfigurationDyingGaspActivation  INTEGER,
		alarmConfigurationCriticalEventActivation  INTEGER,
		alarmConfigurationRemoteStableActivation  INTEGER,
		alarmConfigurationLocalStableActivation  INTEGER,
		alarmConfigurationOAMVendorSpecificActivation  INTEGER,
		alarmConfigurationErroredSymbolPeriodActivation  INTEGER,
		alarmConfigurationErroredSymbolPeriodWindow  OCTET STRING,
		alarmConfigurationErroredSymbolPeriodThreshold  OCTET STRING,
		alarmConfigurationErroredFrameActivation  INTEGER,
		alarmConfigurationErroredFrameWindow  Integer32,
		alarmConfigurationErroredFrameThreshold  Integer32,
		alarmConfigurationErroredFramePeriodActivation  INTEGER,
		alarmConfigurationErroredFramePeriodWindow  Integer32,
		alarmConfigurationErroredFramePeriodThreshold  Integer32,
		alarmConfigurationErroredFrameSecondSummaryActivation  INTEGER,
		alarmConfigurationErroredFrameSecondSummaryWindow  Integer32,
		alarmConfigurationErroredFrameSecondSummaryThreshold  Integer32,
		alarmConfigurationONURegistrationError  INTEGER,
		alarmConfigurationOAMLinkDisconnection  INTEGER,
		alarmConfigurationBadEncryptionKey  INTEGER,
		alarmConfigurationLLIDMismatch  INTEGER,
		alarmConfigurationLLIDMismatchThreshold  Integer32,
		alarmConfigurationTooManyONUsRegistration  INTEGER,
		alarmConfigurationPortBER  Integer32,
		alarmConfigurationPortBERDirection  Integer32,
		alarmConfigurationPortBERThreshold  OCTET STRING,
		alarmConfigurationPortBERMinimumErrorThreshold  Integer32
		}


	alarmConfigurationOLTApply	OBJECT-TYPE	
		SYNTAX			INTEGER  { this ( 0 ) , all ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Apply this setting to all OLT = 1 "
		::=  {  alarmConfigurationEntry  1  }


	alarmConfigurationBERActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Disable alarm monitoring for the specified alarm = 0
				Enable alarm monitoring for the specified alarm = 1
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationBERDirection, 
				alarmConfigurationBERThreshold and alarmConfigurationBERMinimumErrorThreshold leaves."
		::=  {  alarmConfigurationEntry  2  }


	alarmConfigurationBERDirection	OBJECT-TYPE	
		SYNTAX			INTEGER  { up ( 0 ) , down ( 1 ) , both ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Traffic direction to monitor for BER alarm.
				Only one of the allowed values can be applied to a single OLT.
				Uplink (downlink BER is disabled) = 0
				Downlink (uplink BER is disabled) = 1
				Downlink and uplink               = 2
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationBERActivation
				alarmConfigurationBERThreshold and alarmConfigurationBERMinimumErrorThreshold leaves.
				"
		::=  {  alarmConfigurationEntry  3  }


	alarmConfigurationBERThreshold	OBJECT-TYPE	
		SYNTAX			OCTET STRING  ( SIZE ( 1 .. 12  ) ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Normal BER threshold
				0 - 1 (not including 0), ten digit precision
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationBERActivation
				alarmConfigurationBERDirection and alarmConfigurationBERMinimumErrorThreshold leaves.
				"
		::=  {  alarmConfigurationEntry  4  }


	alarmConfigurationBERMinimumErrorThreshold	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"The minimal number of error bytes required for BER alarm
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationBERActivation
				alarmConfigurationBERDirection and alarmConfigurationBERThreshold leaves.
				"
		::=  {  alarmConfigurationEntry  5  }


	alarmConfigurationFERActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Disable alarm monitoring for the specified alarm = 0
				Enable alarm monitoring for the specified alarm = 1
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationFERDirection, 
				alarmConfigurationFERThreshold and alarmConfigurationFERMinimumErrorThreshold leaves."
		::=  {  alarmConfigurationEntry  6  }


	alarmConfigurationFERDirection	OBJECT-TYPE	
		SYNTAX			INTEGER  { up ( 0 ) , down ( 1 ) , both ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Traffic direction to monitor for BER alarm.
				Only one of the allowed values can be applied to a single OLT.
				Uplink (downlink FER is disabled) = 0
				Downlink (uplink FER is disabled) = 1
				Downlink and uplink               = 2
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationFERActivation
				alarmConfigurationFERThreshold and alarmConfigurationFERMinimumErrorThreshold leaves."
		::=  {  alarmConfigurationEntry  7  }


	alarmConfigurationFERThreshold	OBJECT-TYPE	
		SYNTAX			OCTET STRING  ( SIZE ( 1 .. 12  ) ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Normal FER threshold
				0 - 1 (not including 0), ten digit precision
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationFERActivation
				alarmConfigurationFERDirection and alarmConfigurationFERMinimumErrorThreshold leaves."
		::=  {  alarmConfigurationEntry  8  }


	alarmConfigurationFERMinimumErrorThreshold	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"The minimal number of error bytes required for FER alarm
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationFERActivation
				alarmConfigurationFERDirection and alarmConfigurationFERThreshold leaves."
		::=  {  alarmConfigurationEntry  9  }


	alarmConfigurationSoftwareErrorActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Software Errors
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationOLTApply leaf.
				"
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  10  }


	alarmConfigurationLocalLinkFaultActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Local Link Fault
				"
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  11  }


	alarmConfigurationDyingGaspActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Dying Gasp
				"
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  12  }


	alarmConfigurationCriticalEventActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Critical Events
				"
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  13  }


	alarmConfigurationRemoteStableActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Remote stable           "
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  14  }


	alarmConfigurationLocalStableActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Local Stable
				"
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  15  }


	alarmConfigurationOAMVendorSpecificActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"OAM Vendor Specific
				"
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  16  }


	alarmConfigurationErroredSymbolPeriodActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Error Symbol Period        
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationErroredSymbolPeriodWindow
				and alarmConfigurationErroredSymbolPeriodThreshold leaves."
		DEFVAL			{ 1 }
		::=  {  alarmConfigurationEntry  17  }


	alarmConfigurationErroredSymbolPeriodWindow	OBJECT-TYPE	
		SYNTAX			OCTET STRING  ( SIZE ( 0 .. 8  ) ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"The number of symbols in the period           
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationErroredSymbolPeriodActivation
				and alarmConfigurationErroredSymbolPeriodThreshold leaves."
		::=  {  alarmConfigurationEntry  18  }


	alarmConfigurationErroredSymbolPeriodThreshold	OBJECT-TYPE	
		SYNTAX			OCTET STRING  ( SIZE ( 0 .. 8  ) ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Number of errored symbols in the period that is required to be equal
				to or greater than in order for the alarm to be generated           
				
				NOTE for SNMP SET : this leaf must be used together with alarmConfigurationErroredSymbolPeriodActivation
				and alarmConfigurationErroredSymbolPeriodWindow leaves."
		::=  {  alarmConfigurationEntry  19  }


	alarmConfigurationErroredFrameActivation	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 0 ) , enable ( 1 ) } 
		MAX-ACCESS		read-write