provisioning.mib

EPON MIB库源码

--
-- Provisioning.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Wednesday, July 12, 2006 at 17:12:42
--

--  provisioning.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0  Build 88
-- Monday, June 19, 2006 at 11:11:33
-- 

	FORTO-PROVISIONING-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			ifIndex			
				FROM IF-MIB			
			fortoPrivate, FortoOLTIdIndex			
				FROM FORTO-MIB			
			OBJECT-TYPE, MODULE-IDENTITY			
				FROM SNMPv2-SMI;
	
	
--   MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF;
-- 1.3.6.1.4.1.14590.1.8
-- February 08, 1905 at 13:55 GMT
-- February 08, 1905 at 13:55 GMT
		-- 1.3.6.1.4.1.14590.1.8
		fortoProvisioning MODULE-IDENTITY 
			LAST-UPDATED "190502081355Z"		-- February 08, 1905 at 13:55 GMT
			ORGANIZATION 
				"FORTO LTD"
			CONTACT-INFO 
				"   EMANUEL GRINSPUN"
			DESCRIPTION 
				"This MIB isProvisioning MIB ."
			REVISION "190502081355Z"		-- February 08, 1905 at 13:55 GMT
			DESCRIPTION 
				"Revisions made by the Interfaces MIB WG."
			::= { fortoPrivate 8 }

		
	
	
--
-- Node definitions
--
	
--  Node definitions
-- 
-- 1.3.6.1.4.1.14590.1.8.1
		-- 1.3.6.1.4.1.14590.1.8.1
		fortoProvisioningGrant OBJECT IDENTIFIER ::= { fortoProvisioning 1 }

		
--  1.3.6.1.4.1.14590.1.8.1.1
		-- 1.3.6.1.4.1.14590.1.8.1.1
		grantStaticConfigurationTable OBJECT-TYPE
			SYNTAX SEQUENCE OF GrantStaticConfigurationEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This table sets OLT static granting configuration.
				OLT ID for the interface."
			::= { fortoProvisioningGrant 1 }

		
--  1.3.6.1.4.1.14590.1.8.1.1.1
		-- 1.3.6.1.4.1.14590.1.8.1.1.1
		grantStaticConfigurationEntry OBJECT-TYPE
			SYNTAX GrantStaticConfigurationEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"An entry containing OLT ID for get and set."
			INDEX { grantStaticOLTIndex }
			::= { grantStaticConfigurationTable 1 }

		
		GrantStaticConfigurationEntry ::=
			SEQUENCE { 
				grantStaticOLTIndex
					FortoOLTIdIndex,
				grantStaticDiscoverySize
					INTEGER,
				grantStaticDiscoveryFrequency
					INTEGER,
				grantStaticGrantCycleType
					INTEGER
			 }

--  1.3.6.1.4.1.14590.1.8.1.1.1.1
		-- 1.3.6.1.4.1.14590.1.8.1.1.1.1
		grantStaticOLTIndex OBJECT-TYPE
			SYNTAX FortoOLTIdIndex
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"OLT ID             "
			::= { grantStaticConfigurationEntry 1 }

		
--  1.3.6.1.4.1.14590.1.8.1.1.1.2
		-- 1.3.6.1.4.1.14590.1.8.1.1.1.2
		grantStaticDiscoverySize OBJECT-TYPE
			SYNTAX INTEGER (0..65535)
			UNITS " 66 micro seconds"
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Discovery grant length, stated in TQ. Default value: 41,500 TQ (~660MicroSec)
				
				NOTE for SNMP SET : This leaf must be used with all other leaves of this table."
			DEFVAL { 41500 }
			::= { grantStaticConfigurationEntry 2 }

		
--  1.3.6.1.4.1.14590.1.8.1.1.1.3
		-- 1.3.6.1.4.1.14590.1.8.1.1.1.3
		grantStaticDiscoveryFrequency OBJECT-TYPE
			SYNTAX INTEGER (0..65535)
			UNITS "grant cycle"
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"How often the OLT should send discovery frames to the ONUs, 
				measured in grant cycles. Default value: 10                        
				
				NOTE for SNMP SET : This leaf must be used with all other leaves of this table."
			DEFVAL { 10 }
			::= { grantStaticConfigurationEntry 3 }

		
--  1.3.6.1.4.1.14590.1.8.1.1.1.4
		-- 1.3.6.1.4.1.14590.1.8.1.1.1.4
		grantStaticGrantCycleType OBJECT-TYPE
			SYNTAX INTEGER
				{
				static(0),
				expanding(1),
				dynamic(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Static cycle (0)
				Expanding cycle (1) 	
				Dynamic cycle (2)
				
				NOTE for SNMP SET : This leaf must be used with all other leaves of this table."
			::= { grantStaticConfigurationEntry 4 }

		
--  1.3.6.1.4.1.14590.1.8.2
		-- 1.3.6.1.4.1.14590.1.8.2
		fortoProvisioningDBA OBJECT IDENTIFIER ::= { fortoProvisioning 2 }

		
--   DBA  
-- 1.3.6.1.4.1.14590.1.8.2.1
		-- 1.3.6.1.4.1.14590.1.8.2.1
		dbaSetAlgorithmTable OBJECT-TYPE
			SYNTAX SEQUENCE OF DbaSetAlgorithmEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This table sets OLT static granting configuration.
				OLT ID for the interface."
			::= { fortoProvisioningDBA 1 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1
		-- 1.3.6.1.4.1.14590.1.8.2.1.1
		dbaSetAlgorithmEntry OBJECT-TYPE
			SYNTAX DbaSetAlgorithmEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"An entry containing OLT ID for get and set."
			INDEX { dbaSetAlgorithmIndex }
			::= { dbaSetAlgorithmTable 1 }

		
		DbaSetAlgorithmEntry ::=
			SEQUENCE { 
				dbaSetAlgorithmIndex
					FortoOLTIdIndex,
				dbaSetAlgorithmCommand
					INTEGER,
				dbaSetAlgorithmID
					INTEGER,
				dbaSetAlgorithmUseDefault
					INTEGER,
				dbaSetAlgorithmInitializationDataSize
					INTEGER,
				dbaSetAlgorithmInitializationData1
					OCTET STRING,
				dbaSetAlgorithmInitializationData2
					OCTET STRING,
				dbaSetAlgorithmInitializationData3
					OCTET STRING,
				dbaSetAlgorithmInitializationData4
					OCTET STRING,
				dbaSetAlgorithmInitializationData5
					OCTET STRING,
				dbaSetAlgorithmInitializationData6
					OCTET STRING
			 }

--  1.3.6.1.4.1.14590.1.8.2.1.1.1
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.1
		dbaSetAlgorithmIndex OBJECT-TYPE
			SYNTAX FortoOLTIdIndex
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"OLT ID             "
			::= { dbaSetAlgorithmEntry 1 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.2
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.2
		dbaSetAlgorithmCommand OBJECT-TYPE
			SYNTAX INTEGER
				{
				start(0),
				send(1),
				stopm(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"The command to do in this PDU
				start DBA = 0
				send DBA msg = 1
				stop DBA  = 2
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmUseDefault, 
				dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 2 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.3
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.3
		dbaSetAlgorithmID OBJECT-TYPE
			SYNTAX INTEGER (0..65535)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"For send command
				Id associated to the DBA msg. 
				             "
			::= { dbaSetAlgorithmEntry 3 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.4
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.4
		dbaSetAlgorithmUseDefault OBJECT-TYPE
			SYNTAX INTEGER
				{
				false(0),
				true(1)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Use previously loaded DBA DLL algorithm (external) = 0 	
				Use OLT default internal DBA algorithm (SLA-based bandwidth for all LLIDs) = 1          
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 4 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.5
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.5
		dbaSetAlgorithmInitializationDataSize OBJECT-TYPE
			SYNTAX INTEGER (0..1500)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Initialization data size, measured in bytes          
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmUseDefault and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 5 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.6
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.6
		dbaSetAlgorithmInitializationData1 OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..250))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Initialization data (buffer) to be sent to the DBA algorithm           
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmUseDefault, dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 6 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.7
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.7
		dbaSetAlgorithmInitializationData2 OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..250))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Initialization data (buffer) to be sent to the DBA algorithm           
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmUseDefault, dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 7 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.8
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.8
		dbaSetAlgorithmInitializationData3 OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..250))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Initialization data (buffer) to be sent to the DBA algorithm           
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmUseDefault, dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 8 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.9
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.9
		dbaSetAlgorithmInitializationData4 OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..250))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Initialization data (buffer) to be sent to the DBA algorithm           
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmUseDefault, dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 9 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.10
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.10
		dbaSetAlgorithmInitializationData5 OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..250))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Initialization data (buffer) to be sent to the DBA algorithm           
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmUseDefault, dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 10 }

		
--  1.3.6.1.4.1.14590.1.8.2.1.1.11
		-- 1.3.6.1.4.1.14590.1.8.2.1.1.11
		dbaSetAlgorithmInitializationData6 OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..250))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Initialization data (buffer) to be sent to the DBA algorithm           
				
				NOTE for SNMP SET : 
				- When using start DBA (0), this leaf must be used together with dbaSetAlgorithmCommand,
				dbaSetAlgorithmUseDefault, dbaSetAlgorithmInitializationDataSize and all dbaSetAlgorithmInitializationDatax leaves.
				In case dbaSetAlgorithmInitializationDataSize  = 0, then 
				dbaSetAlgorithmInitializationData1..dbaSetAlgorithmInitializationData6 is not mandatory."
			::= { dbaSetAlgorithmEntry 11 }

		
--  1.3.6.1.4.1.14590.1.8.2.2
		-- 1.3.6.1.4.1.14590.1.8.2.2
		dbaModeTable OBJECT-TYPE
			SYNTAX SEQUENCE OF DbaModeEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This table gets the DBA Mode.
				OLT ID for the interface."
			::= { fortoProvisioningDBA 2 }

		
--  1.3.6.1.4.1.14590.1.8.2.2.1
		-- 1.3.6.1.4.1.14590.1.8.2.2.1
		dbaModeEntry OBJECT-TYPE
			SYNTAX DbaModeEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"An entry containing OLT ID."
			INDEX { dbaModeIndex }
			::= { dbaModeTable 1 }

		
		DbaModeEntry ::=
			SEQUENCE { 
				dbaModeIndex
					FortoOLTIdIndex,
				dbaModeGetMode
					INTEGER,
				dbaReportFormat
					INTEGER

			 }

--  1.3.6.1.4.1.14590.1.8.2.2.1.1
		-- 1.3.6.1.4.1.14590.1.8.2.2.1.1