⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 keymile_hdlc_enet.h

📁 uboot200903最新版本的通用uboot
💻 H
字号:
/* * (C) Copyright 2008 * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#ifndef _KEYMILE_HDLC_ENET_H_#define _KEYMILE_HDLC_ENET_H_/* Unfortuantely, we have do this to get the flag defines in the cbd_t */#ifdef CONFIG_KM8XX#include <commproc.h>#endif#ifdef CONFIG_MGCOGE#include <mpc8260.h>#include <asm/cpm_8260.h>#endif/* * Defines for the ICN protocol used for communication over HDLC * on the backplane between MGSUVDs and MGCOGEs. *//* * MAC which is reserved for communication (0x00 - 0xff in the last byte, * which is the slot number) *//* * A DLL frame looks like this: *  8 bit  |  8 bit     |  8 bit |  8 bit     | n * 8 bit| 16 bit|  8 bit *  opening| destination| source | application|  data    |  FCS  | closing *   flag  |  address   | address|            |          |       |  flag *  (HW)      (APP)       (APP)      (APP)       (APP)      (HW)   (HW) *//* * The opening flag, the FCS and the closing flag are set by the hardware so * they are not reflected in this struct. */struct icn_hdr {	unsigned char dest_addr;	unsigned char src_addr;	unsigned char application;} __attribute__((packed));#define ICNHDR_LEN	(sizeof(struct icn_hdr))#define CRC_LEN		(sizeof(short))/* bytes to remove from packet before sending it upstream */#define REMOVE		(ICNHDR_LEN + CRC_LEN)struct icn_frame {	struct icn_hdr hdr;	unsigned char data[0];	/* a place holder */} __attribute__((packed));/* Address field */#define HDLC_UUA	0x00 /* Unicast Unit Address */#define HDLC_UUA_MASK	0x3f /* the last 6 bits contain the slot number */#define SET_HDLC_UUA(x) ((HDLC_UUA | ((x) & HDLC_UUA_MASK)))#define HDLC_UACUA	0x7f /* Unicast Active Control Unit Address */#define HDLC_BCAST	0xff /* broadcast *//* Application field */#define MGS_UUSP	0x00#define MGS_UREP	0x01#define MGS_IUP		0x02#define MGS_UTA		0x03#define MGS_MDS		0x04#define MGS_ITIME	0x05/* added by DENX */#define MGS_NETCONS	0x06	/* netconsole */#define MGS_TFTP	0x07/* Useful defines for buffer sizes, etc. */#define HDLC_PKTBUFSRX		32#define MAX_FRAME_LENGTH	1500 /* ethernet frame size */			 /*   14        +    28     */#define INET_HDR_SIZE	(ETHER_HDR_SIZE + IP_HDR_SIZE)#define INET_HDR_ALIGN	(((INET_HDR_SIZE + PKTALIGN - 1) / PKTALIGN) * PKTALIGN)/* INET_HDR_SIZE is stripped off */#define PKT_MAXBLR_SIZE	(MAX_FRAME_LENGTH + INET_HDR_ALIGN)/* * It is too slow to read always the port numbers and IP addresses from the * string variables. * cachedNumbers is meant to cache it. * THIS IS ONLY A SPEED IMPROVEMENT! */enum {	IP_ADDR = 0,	/* getenv_IPaddr("serverip"); */	IP_SERVER,	/* getenv_IPaddr("ipaddr"); */	TFTP_SRC_PORT,	/* simple_strtol(getenv("tftpsrcp"), NULL, 10); */	TFTP_DST_PORT,	/* simple_strtol(getenv("tftpdstp"), NULL, 10); */	NETCONS_PORT,	/* simple_strtol(getenv("ncip"), NULL, 10); */	CACHEDNUMBERS};#define WELL_KNOWN_PORT 69	/* Well known TFTP port # *//* define this to create a test commend (htest) */#undef TEST_IT#ifdef TEST_IT/* have to save a copy of the eth_device for the test command's use */struct eth_device *seth;#endif/* define this for outputting of received packets */#undef TEST_RX/* define this for outputting of packets being sent */#undef TEST_TX#endif /* _KEYMILE_HDLC_ENET_H_ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -