serial.cpp

不用控制器,对读卡头进行读写.可设置根据读卡器类型不同而进行长度的设置

//	Serial.cpp - Implementation of the CSerial class
//
//	Copyright (C) 1999-2003 Ramon de Klein ([e-mail])
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
// 
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
// Lesser General Public License for more details.
// 
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA


//////////////////////////////////////////////////////////////////////
// Include the standard header files

#define STRICT
#include <crtdbg.h>
#include <tchar.h>
#include <windows.h>
#include <stdafx.h> 


//////////////////////////////////////////////////////////////////////
// Include module headerfile

#include "Serial.h"


//////////////////////////////////////////////////////////////////////
// Disable warning C4127: conditional expression is constant, which
// is generated when using the _RPTF and _ASSERTE macros.

#pragma warning(disable: 4127)


//////////////////////////////////////////////////////////////////////
// Enable debug memory manager

#ifdef _DEBUG

#ifdef THIS_FILE
#undef THIS_FILE
#endif

static const char THIS_FILE[] = __FILE__;
#define new DEBUG_NEW

#endif


//////////////////////////////////////////////////////////////////////
// Helper methods

inline void CSerial::CheckRequirements (LPOVERLAPPED lpOverlapped, DWORD dwTimeout) const
{
#ifdef SERIAL_NO_OVERLAPPED

	// Check if an overlapped structure has been specified
	if (lpOverlapped || (dwTimeout != INFINITE))
	{
		// Quit application
		::MessageBox(0,_T("Overlapped I/O and time-outs are not supported, when overlapped I/O is disabled."),_T("Serial library"), MB_ICONERROR | MB_TASKMODAL);
		::DebugBreak();
		::ExitProcess(0xFFFFFFF);
	}

#endif

#ifdef SERIAL_NO_CANCELIO

	// Check if 0 or INFINITE time-out has been specified, because
	// the communication I/O cannot be cancelled.
	if ((dwTimeout != 0) && (dwTimeout != INFINITE))
	{
		// Quit application
		::MessageBox(0,_T("Timeouts are not supported, when SERIAL_NO_CANCELIO is defined"),_T("Serial library"), MB_ICONERROR | MB_TASKMODAL);
		::DebugBreak();
		::ExitProcess(0xFFFFFFF);
	}

#endif	// SERIAL_NO_CANCELIO

	// Avoid warnings
	(void) dwTimeout;
	(void) lpOverlapped;
}

inline BOOL CSerial::CancelCommIo (void)
{
#ifdef SERIAL_NO_CANCELIO
	// CancelIo shouldn't have been called at this point
	::DebugBreak();
	return FALSE;
#else

	// Cancel the I/O request
	return ::CancelIo(m_hFile);

#endif	// SERIAL_NO_CANCELIO
}


//////////////////////////////////////////////////////////////////////
// Code

CSerial::CSerial ()
	: m_lLastError(ERROR_SUCCESS)
	, m_hFile(0)
	, m_eEvent(EEventNone)
	, m_dwEventMask(0)
#ifndef SERIAL_NO_OVERLAPPED
	, m_hevtOverlapped(0)
#endif
{
}

CSerial::~CSerial ()
{
	// If the device is already closed,
	// then we don't need to do anything.
	if (m_hFile)
	{
		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::~CSerial - Serial port not closed\n");

		// Close implicitly
		Close();
	}
}

CSerial::EPort CSerial::CheckPort (LPCTSTR lpszDevice)
{
	// Try to open the device
	HANDLE hFile = ::CreateFile(lpszDevice, 
						   GENERIC_READ|GENERIC_WRITE, 
						   0, 
						   0, 
						   OPEN_EXISTING, 
						   0,
						   0);

	// Check if we could open the device
	if (hFile == INVALID_HANDLE_VALUE)
	{
		// Display error
		switch (::GetLastError())
		{
		case ERROR_FILE_NOT_FOUND:
			// The specified COM-port does not exist
			return EPortNotAvailable;

		case ERROR_ACCESS_DENIED:
			// The specified COM-port is in use
			return EPortInUse;

		default:
			// Something else is wrong
			return EPortUnknownError;
		}
	}

	// Close handle
	::CloseHandle(hFile);

	// Port is available
	return EPortAvailable;
}

LONG CSerial::Open (LPCTSTR lpszDevice, DWORD dwInQueue, DWORD dwOutQueue, bool fOverlapped)
{
	// Reset error state
	m_lLastError = ERROR_SUCCESS;

	// Check if the port isn't already opened
	if (m_hFile)
	{
		m_lLastError = ERROR_ALREADY_INITIALIZED;
		_RPTF0(_CRT_WARN,"CSerial::Open - Port already opened\n");
		return m_lLastError;
	}

	// Open the device
	m_hFile = ::CreateFile(lpszDevice,
						   GENERIC_READ|GENERIC_WRITE,
						   0,
						   0,
						   OPEN_EXISTING,
						   fOverlapped?FILE_FLAG_OVERLAPPED:0,
						   0);
	if (m_hFile == INVALID_HANDLE_VALUE)
	{
		// Reset file handle
		m_hFile = 0;

		// Display error
		m_lLastError = ::GetLastError();
		_RPTF0(_CRT_WARN, "CSerial::Open - Unable to open port\n");
		return m_lLastError;
	}

#ifndef SERIAL_NO_OVERLAPPED
	// We cannot have an event handle yet
	_ASSERTE(m_hevtOverlapped == 0);

	// Create the event handle for internal overlapped operations (manual reset)
	if (fOverlapped)
	{
		m_hevtOverlapped = ::CreateEvent(0,true,false,0);
		if (m_hevtOverlapped == 0)
		{
			// Obtain the error information
			m_lLastError = ::GetLastError();
			_RPTF0(_CRT_WARN,"CSerial::Open - Unable to create event\n");

			// Close the port
			::CloseHandle(m_hFile);
			m_hFile = 0;

			// Return the error
			return m_lLastError;
		}
	}
#else
	
	// Overlapped flag shouldn't be specified
	_ASSERTE(!fOverlapped);

#endif

	// Setup the COM-port
	if (dwInQueue || dwOutQueue)
	{
		// Make sure the queue-sizes are reasonable sized. Win9X systems crash
		// if the input queue-size is zero. Both queues need to be at least
		// 16 bytes large.
		_ASSERTE(dwInQueue >= 16);
		_ASSERTE(dwOutQueue >= 16);

		if (!::SetupComm(m_hFile,dwInQueue,dwOutQueue))
		{
			// Display a warning
			long lLastError = ::GetLastError();
			_RPTF0(_CRT_WARN,"CSerial::Open - Unable to setup the COM-port\n");

			// Close the port
			Close();

			// Save last error from SetupComm
			m_lLastError = lLastError;
			return m_lLastError;	
		}
	}

	// Setup the default communication mask
	SetMask();

	// Non-blocking reads is default
	SetupReadTimeouts(EReadTimeoutNonblocking);

	// Setup the device for default settings
 	COMMCONFIG commConfig = {0};
	DWORD dwSize = sizeof(commConfig);
	commConfig.dwSize = dwSize;
	if (::GetDefaultCommConfig(lpszDevice,&commConfig,&dwSize))
	{
		// Set the default communication configuration
		if (!::SetCommConfig(m_hFile,&commConfig,dwSize))
		{
			// Display a warning
			_RPTF0(_CRT_WARN,"CSerial::Open - Unable to set default communication configuration.\n");
		}
	}
	else
	{
		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::Open - Unable to obtain default communication configuration.\n");
	}

	// Return successful
	return m_lLastError;
}

LONG CSerial::Close (void)
{
	// Reset error state
	m_lLastError = ERROR_SUCCESS;

	// If the device is already closed,
	// then we don't need to do anything.
	if (m_hFile == 0)
	{
		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::Close - Method called when device is not open\n");
		return m_lLastError;
	}

#ifndef SERIAL_NO_OVERLAPPED
	// Free event handle
	if (m_hevtOverlapped)
	{
		::CloseHandle(m_hevtOverlapped);
		m_hevtOverlapped = 0;
	}
#endif

	// Close COM port
	::CloseHandle(m_hFile);
	m_hFile = 0;

	// Return successful
	return m_lLastError;
}

LONG CSerial::Setup (EBaudrate eBaudrate, EDataBits eDataBits, EParity eParity, EStopBits eStopBits)
{
	// Reset error state
	m_lLastError = ERROR_SUCCESS;

	// Check if the device is open
	if (m_hFile == 0)
	{
		// Set the internal error code
		m_lLastError = ERROR_INVALID_HANDLE;

		// Issue an error and quit
		_RPTF0(_CRT_WARN,"CSerial::Setup - Device is not opened\n");
		return m_lLastError;
	}

	// Obtain the DCB structure for the device
	CDCB dcb;
	if (!::GetCommState(m_hFile,&dcb))
	{
		// Obtain the error code
		m_lLastError = ::	GetLastError();

		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::Setup - Unable to obtain DCB information\n");
		return m_lLastError;
	}

	// Set the new data
	dcb.BaudRate = DWORD(eBaudrate);
	dcb.ByteSize = BYTE(eDataBits);
	dcb.Parity   = BYTE(eParity);
	dcb.StopBits = BYTE(eStopBits);

	// Determine if parity is used
	dcb.fParity  = (eParity != EParNone);

	// Set the new DCB structure
	if (!::SetCommState(m_hFile,&dcb))
	{
		// Obtain the error code
		m_lLastError = ::GetLastError();

		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::Setup - Unable to set DCB information\n");
		return m_lLastError;
	}

	// Return successful
	return m_lLastError;
}

LONG CSerial::SetEventChar (BYTE bEventChar, bool fAdjustMask)
{
	// Reset error state
	m_lLastError = ERROR_SUCCESS;

	// Check if the device is open
	if (m_hFile == 0)
	{
		// Set the internal error code
		m_lLastError = ERROR_INVALID_HANDLE;

		// Issue an error and quit
		_RPTF0(_CRT_WARN,"CSerial::SetEventChar - Device is not opened\n");
		return m_lLastError;
	}

	// Obtain the DCB structure for the device
	CDCB dcb;
	if (!::GetCommState(m_hFile,&dcb))
	{
		// Obtain the error code
		m_lLastError = ::GetLastError();

		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::SetEventChar - Unable to obtain DCB information\n");
		return m_lLastError;
	}

	// Set the new event character
	dcb.EvtChar = char(bEventChar);

	// Adjust the event mask, to make sure the event will be received
	if (fAdjustMask)
	{
		// Enable 'receive event character' event.  Note that this
		// will generate an EEventNone if there is an asynchronous
		// WaitCommEvent pending.
		SetMask(GetEventMask() | EEventRcvEv);
	}

	// Set the new DCB structure
	if (!::SetCommState(m_hFile,&dcb))
	{
		// Obtain the error code
		m_lLastError = ::GetLastError();

		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::SetEventChar - Unable to set DCB information\n");
		return m_lLastError;
	}

	// Return successful
	return m_lLastError;
}

LONG CSerial::SetMask (DWORD dwEventMask)
{
	// Reset error state
	m_lLastError = ERROR_SUCCESS;

	// Check if the device is open
	if (m_hFile == 0)
	{
		// Set the internal error code
		m_lLastError = ERROR_INVALID_HANDLE;

		// Issue an error and quit
		_RPTF0(_CRT_WARN,"CSerial::SetMask - Device is not opened\n");
		return m_lLastError;
	}

	// Set the new mask. Note that this will generate an EEventNone
	// if there is an asynchronous WaitCommEvent pending.
	if (!::SetCommMask(m_hFile,dwEventMask))
	{
		// Obtain the error code
		m_lLastError = ::GetLastError();

		// Display a warning
		_RPTF0(_CRT_WARN,"CSerial::SetMask - Unable to set event mask\n");
		return m_lLastError;
	}

	// Save event mask and return successful
	m_dwEventMask = dwEventMask;
	return m_lLastError;
}

LONG CSerial::WaitEvent (LPOVERLAPPED lpOverlapped, DWORD dwTimeout)
{
	// Check if time-outs are supported
	CheckRequirements(lpOverlapped,dwTimeout);

	// Reset error state
	m_lLastError = ERROR_SUCCESS;

	// Check if the device is open
	if (m_hFile == 0)
	{
		// Set the internal error code
		m_lLastError = ERROR_INVALID_HANDLE;

		// Issue an error and quit
		_RPTF0(_CRT_WARN,"CSerial::WaitEvent - Device is not opened\n");
		return m_lLastError;