config.in

linux下hpi口驱动程序

#   fi
fi

tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
if [ "$CONFIG_MOUSE" != "n" ]; then
   bool '  PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
   tristate '  C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
   tristate '  PC110 digitizer pad support' CONFIG_PC110_PAD
   tristate '  MK712 touch screen support' CONFIG_MK712_MOUSE
fi
endmenu

source drivers/char/joystick/Config.in

tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
   bool '  Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
   if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
      comment '  Edit configuration parameters in ./include/linux/tpqic02.h!'
   else
      comment '  Setting runtime QIC-02 configuration is done with qic02conf'
      comment '  from the tpqic02-support package.  It is available at'
      comment '  metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
   fi
fi

tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER
dep_mbool '  Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER
dep_tristate '  Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER
dep_tristate '  IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER
dep_tristate '  IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER

mainmenu_option next_comment
comment 'Watchdog Cards'
bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
   tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
   tristate '  Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
   tristate '  ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
   tristate '  ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT
   tristate '  AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
   tristate '  Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
   if [ "$CONFIG_ARM" = "y" ]; then
      dep_tristate '  DC21285 watchdog' CONFIG_21285_WATCHDOG $CONFIG_FOOTBRIDGE
      dep_tristate '  NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG $CONFIG_ARCH_NETWINDER
      dep_tristate '  SA1100 watchdog' CONFIG_SA1100_WATCHDOG $CONFIG_ARCH_SA1100
      dep_tristate '  EPXA watchdog' CONFIG_EPXA_WATCHDOG $CONFIG_ARCH_CAMELOT
      dep_tristate '  Omaha watchdog' CONFIG_OMAHA_WATCHDOG $CONFIG_ARCH_OMAHA
      dep_tristate '  AT91RM9200 watchdog' CONFIG_AT91_WATCHDOG $CONFIG_ARCH_AT91RM9200
   fi
   tristate '  Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
   tristate '  IB700 SBC Watchdog Timer' CONFIG_IB700_WDT
   tristate '  ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
   tristate '  Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
   tristate '  Mixcom Watchdog' CONFIG_MIXCOMWD 
   tristate '  SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
   dep_tristate '  SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
   tristate '  NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
   tristate '  W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
   tristate '  WDT Watchdog timer' CONFIG_WDT
   tristate '  WDT PCI Watchdog timer' CONFIG_WDTPCI
   if [ "$CONFIG_WDT" != "n" ]; then
      bool '    WDT501 features' CONFIG_WDT_501
      if [ "$CONFIG_WDT_501" = "y" ]; then
         bool '      Fan Tachometer' CONFIG_WDT_501_FAN
      fi
   fi
   tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
   if [ "$CONFIG_SGI_IP22" = "y" ]; then
      dep_tristate '  Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
   fi
   if [ "$CONFIG_8xx" = "y" ]; then
      tristate '  MPC8xx Watchdog Timer' CONFIG_8xx_WDT
   fi
fi
endmenu

if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
   tristate 'NetWinder thermometer support' CONFIG_DS1620
   tristate 'NetWinder Button' CONFIG_NWBUTTON
   if [ "$CONFIG_NWBUTTON" != "n" ]; then
      bool '  Reboot Using Button' CONFIG_NWBUTTON_REBOOT
   fi
   tristate 'NetWinder flash support' CONFIG_NWFLASH
fi
tristate 'NatSemi SCx200 Support' CONFIG_SCx200
dep_tristate '  NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200

if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then
   bool 'SGI SN2 fetchop support' CONFIG_FETCHOP
fi

if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
   dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
fi
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
   dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
fi
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \
     "$CONFIG_X86_64" = "y" ]; then
   dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI
fi
dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI
tristate '/dev/nvram support' CONFIG_NVRAM
tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
if [ "$CONFIG_IA64" = "y" ]; then
   bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC
fi
if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
   bool 'Tadpole ANA H8 Support (OBSOLETE)'  CONFIG_H8
fi
if [ "$CONFIG_MIPS" = "y" -a "$CONFIG_NEW_TIME_C" = "y" ]; then
   tristate 'Generic MIPS RTC Support' CONFIG_MIPS_RTC
fi
if [ "$CONFIG_SGI_IP22" = "y" ]; then
   bool 'SGI DS1286 RTC support' CONFIG_SGI_DS1286
fi
if [ "$CONFIG_SGI_IP27" = "y" ]; then
   bool 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
fi
if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
   tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
fi
if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
   tristate 'SA1100 Real Time Clock' CONFIG_SA1100_RTC
fi
if [ "$CONFIG_ARCH_OMAHA" = "y" ]; then
   tristate 'Omaha Real Time Clock' CONFIG_OMAHA_RTC
fi
if [ "$CONFIG_ARCH_AT91RM9200" = "y" ]; then
   tristate 'AT91RM9200 Real Time Clock' CONFIG_AT91_RTC
fi

tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
tristate 'Siemens R3964 line discipline' CONFIG_R3964
tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then
   dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI
fi

mainmenu_option next_comment
comment 'Ftape, the floppy tape device driver'
tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
if [ "$CONFIG_FTAPE" != "n" ]; then
   source drivers/char/ftape/Config.in
fi

endmenu

if [ "$CONFIG_GART_IOMMU" = "y" ]; then
	bool '/dev/agpgart (AGP Support)' CONFIG_AGP
	define_bool CONFIG_AGP_AMD_K8 y
else
	tristate '/dev/agpgart (AGP Support)' CONFIG_AGP
fi      
if [ "$CONFIG_AGP" != "n" ]; then
   bool '  Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL
   bool '  Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810
   bool '  VIA chipset support' CONFIG_AGP_VIA
   bool '  AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD
   if [ "$CONFIG_GART_IOMMU" != "y" ]; then
      bool '  AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8
   fi   
   bool '  Generic SiS support' CONFIG_AGP_SIS
   bool '  ALI chipset support' CONFIG_AGP_ALI
   bool '  Serverworks LE/HE support' CONFIG_AGP_SWORKS
   if [ "$CONFIG_X86" = "y" ]; then
      bool '  NVIDIA chipset support' CONFIG_AGP_NVIDIA
   fi
   if [ "$CONFIG_IA64" = "y" ]; then
      bool '  Intel 460GX support' CONFIG_AGP_I460
      bool '  HP ZX1 AGP support' CONFIG_AGP_HP_ZX1
   fi
   bool '  ATI IGP chipset support' CONFIG_AGP_ATI
fi

mainmenu_option next_comment
comment 'Direct Rendering Manager (XFree86 DRI support)'
bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
if [ "$CONFIG_DRM" = "y" ]; then
   bool '  Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD
   if [ "$CONFIG_DRM_OLD" = "y" ]; then
      comment 'DRM 4.0 drivers'
      source drivers/char/drm-4.0/Config.in
   else
      comment 'DRM 4.1 drivers'
      define_bool CONFIG_DRM_NEW y
      source drivers/char/drm/Config.in
   fi
fi
endmenu

if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
   source drivers/char/pcmcia/Config.in
fi
if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
   tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
   tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
fi
if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
  tristate ' ITE GPIO' CONFIG_ITE_GPIO
fi

if [ "$CONFIG_X86" = "y" ]; then
   tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
   dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV
fi

endmenu