msp430x24x_ta_24.c

这是关于430单片机的一些应用示例程序

//*****************************************************************************
//  MSP430x24x Demo - Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz INCLK
//
//  Description: Toggle P1.0 using software and the TA_0 ISR. Timer_A is
//  configured for up mode, thus the timer overflows when TAR counts
//  to CCR0. In this example, CCR0 is loaded with 1000-1.
//  ACLK = TACLK = INCLK = 32768Hz, MCLK = SMCLK = default DCO ~1.045Mhz
//  //* An external watch crystal on XIN XOUT is required for ACLK *//	
//
//           MSP430F249
//         ---------------
//     /|\|            XIN|-
//      | |               | 32kHz
//      --|RST        XOUT|-
//        |               |
//        |      P2.0/ACLK|---+
//        |               |   |
//        |     P2.1/INCLK|<--+
//        |               |
//        |           P1.0|-->LED (Toggle rate is ACLK/1000)
//
//  B. Nisarga
//  Texas Instruments Inc.
//  September 2007
//  Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.42A
//*****************************************************************************

#include  <msp430x24x.h>

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop WDT
  P1DIR |= 0x01;                            // P1.0 output
  P2SEL |= 0x03;                            // Select P2.0,1 ACLK,INCLK options
  P2DIR |= 0x01;                            // Set P2.0 as output

  CCTL0 = CCIE;                             // CCR0 interrupt enabled
  CCR0 = 1000-1;
  TACTL = TASSEL_3 + MC_1;                  // INCLK, upmode

  _BIS_SR(LPM3_bits + GIE);                 // Enter LPM3 w/ interrupt
}

// Timer A0 interrupt service routine
#pragma vector=TIMERA0_VECTOR
__interrupt void Timer_A (void)
{
  P1OUT ^= 0x01;                            // Toggle P1.0
}