📄 2440addr.h
字号:
#define rGPHDAT (*(volatile unsigned *)0x56000074) //Port H data
#define rGPHUP (*(volatile unsigned *)0x56000078) //Pull-up control H
//add for 2440
#define rGPJCON (*(volatile unsigned *)0x560000d0) //Port J control
#define rGPJDAT (*(volatile unsigned *)0x560000d4) //Port J data
#define rGPJUP (*(volatile unsigned *)0x560000d8) //Pull-up control J
#define rMISCCR (*(volatile unsigned *)0x56000080) //Miscellaneous control
#define rDCLKCON (*(volatile unsigned *)0x56000084) //DCLK0/1 control
#define rEXTINT0 (*(volatile unsigned *)0x56000088) //External interrupt control register 0
#define rEXTINT1 (*(volatile unsigned *)0x5600008c) //External interrupt control register 1
#define rEXTINT2 (*(volatile unsigned *)0x56000090) //External interrupt control register 2
#define rEINTFLT0 (*(volatile unsigned *)0x56000094) //Reserved
#define rEINTFLT1 (*(volatile unsigned *)0x56000098) //Reserved
#define rEINTFLT2 (*(volatile unsigned *)0x5600009c) //External interrupt filter control register 2
#define rEINTFLT3 (*(volatile unsigned *)0x560000a0) //External interrupt filter control register 3
#define rEINTMASK (*(volatile unsigned *)0x560000a4) //External interrupt mask
#define rEINTPEND (*(volatile unsigned *)0x560000a8) //External interrupt pending
#define rGSTATUS0 (*(volatile unsigned *)0x560000ac) //External pin status
#define rGSTATUS1 (*(volatile unsigned *)0x560000b0) //Chip ID(0x32440000)
#define rGSTATUS2 (*(volatile unsigned *)0x560000b4) //Reset type
#define rGSTATUS3 (*(volatile unsigned *)0x560000b8) //Saved data0(32-bit) before entering POWER_OFF mode
#define rGSTATUS4 (*(volatile unsigned *)0x560000bc) //Saved data0(32-bit) before entering POWER_OFF mode
// Added for 2440
#define rFLTOUT (*(volatile unsigned *)0x560000c0) // Filter output(Read only)
#define rDSC0 (*(volatile unsigned *)0x560000c4) // Strength control register 0
#define rDSC1 (*(volatile unsigned *)0x560000c8) // Strength control register 1
#define rMSLCON (*(volatile unsigned *)0x560000cc) // Memory sleep control register
// RTC
#ifdef __BIG_ENDIAN
#define rRTCCON (*(volatile unsigned char *)0x57000043) //RTC control
#define rTICNT (*(volatile unsigned char *)0x57000047) //Tick time count
#define rRTCALM (*(volatile unsigned char *)0x57000053) //RTC alarm control
#define rALMSEC (*(volatile unsigned char *)0x57000057) //Alarm second
#define rALMMIN (*(volatile unsigned char *)0x5700005b) //Alarm minute
#define rALMHOUR (*(volatile unsigned char *)0x5700005f) //Alarm Hour
#define rALMDAY (*(volatile unsigned char *)0x57000063) //Alarm day
#define rALMMON (*(volatile unsigned char *)0x57000067) //Alarm month
#define rALMYEAR (*(volatile unsigned char *)0x5700006b) //Alarm year
#define rRTCRST (*(volatile unsigned char *)0x5700006f) //RTC round reset
#define rBCDSEC (*(volatile unsigned char *)0x57000073) //BCD second
#define rBCDMIN (*(volatile unsigned char *)0x57000077) //BCD minute
#define rBCDHOUR (*(volatile unsigned char *)0x5700007b) //BCD hour
#define rBCDDAY (*(volatile unsigned char *)0x5700007f) //BCD day
#define rBCDDATE (*(volatile unsigned char *)0x57000083) //BCD date
#define rBCDMON (*(volatile unsigned char *)0x57000087) //BCD month
#define rBCDYEAR (*(volatile unsigned char *)0x5700008b) //BCD year
#else //Little Endian
#define rRTCCON (*(volatile unsigned char *)0x57000040) //RTC control
#define rTICNT (*(volatile unsigned char *)0x57000044) //Tick time count
#define rRTCALM (*(volatile unsigned char *)0x57000050) //RTC alarm control
#define rALMSEC (*(volatile unsigned char *)0x57000054) //Alarm second
#define rALMMIN (*(volatile unsigned char *)0x57000058) //Alarm minute
#define rALMHOUR (*(volatile unsigned char *)0x5700005c) //Alarm Hour
#define rALMDAY (*(volatile unsigned char *)0x57000060) //Alarm day
#define rALMMON (*(volatile unsigned char *)0x57000064) //Alarm month
#define rALMYEAR (*(volatile unsigned char *)0x57000068) //Alarm year
#define rRTCRST (*(volatile unsigned char *)0x5700006c) //RTC round reset
#define rBCDSEC (*(volatile unsigned char *)0x57000070) //BCD second
#define rBCDMIN (*(volatile unsigned char *)0x57000074) //BCD minute
#define rBCDHOUR (*(volatile unsigned char *)0x57000078) //BCD hour
#define rBCDDAY (*(volatile unsigned char *)0x5700007c) //BCD day
#define rBCDDATE (*(volatile unsigned char *)0x57000080) //BCD date
#define rBCDMON (*(volatile unsigned char *)0x57000084) //BCD month
#define rBCDYEAR (*(volatile unsigned char *)0x57000088) //BCD year
#endif //RTC
// ADC
#define rADCCON (*(volatile unsigned *)0x58000000) //ADC control
#define rADCTSC (*(volatile unsigned *)0x58000004) //ADC touch screen control
#define rADCDLY (*(volatile unsigned *)0x58000008) //ADC start or Interval Delay
#define rADCDAT0 (*(volatile unsigned *)0x5800000c) //ADC conversion data 0
#define rADCDAT1 (*(volatile unsigned *)0x58000010) //ADC conversion data 1
// SPI
#define rSPCON0 (*(volatile unsigned *)0x59000000) //SPI0 control
#define rSPSTA0 (*(volatile unsigned *)0x59000004) //SPI0 status
#define rSPPIN0 (*(volatile unsigned *)0x59000008) //SPI0 pin control
#define rSPPRE0 (*(volatile unsigned *)0x5900000c) //SPI0 baud rate prescaler
#define rSPTDAT0 (*(volatile unsigned *)0x59000010) //SPI0 Tx data
#define rSPRDAT0 (*(volatile unsigned *)0x59000014) //SPI0 Rx data
#define rSPCON1 (*(volatile unsigned *)0x59000020) //SPI1 control
#define rSPSTA1 (*(volatile unsigned *)0x59000024) //SPI1 status
#define rSPPIN1 (*(volatile unsigned *)0x59000028) //SPI1 pin control
#define rSPPRE1 (*(volatile unsigned *)0x5900002c) //SPI1 baud rate prescaler
#define rSPTDAT1 (*(volatile unsigned *)0x59000030) //SPI1 Tx data
#define rSPRDAT1 (*(volatile unsigned *)0x59000034) //SPI1 Rx data
// SD Interface
#define rSDICON (*(volatile unsigned *)0x5a000000) //SDI control
#define rSDIPRE (*(volatile unsigned *)0x5a000004) //SDI baud rate prescaler
#define rSDICARG (*(volatile unsigned *)0x5a000008) //SDI command argument
#define rSDICCON (*(volatile unsigned *)0x5a00000c) //SDI command control
#define rSDICSTA (*(volatile unsigned *)0x5a000010) //SDI command status
#define rSDIRSP0 (*(volatile unsigned *)0x5a000014) //SDI response 0
#define rSDIRSP1 (*(volatile unsigned *)0x5a000018) //SDI response 1
#define rSDIRSP2 (*(volatile unsigned *)0x5a00001c) //SDI response 2
#define rSDIRSP3 (*(volatile unsigned *)0x5a000020) //SDI response 3
#define rSDIDTIMER (*(volatile unsigned *)0x5a000024) //SDI data/busy timer
#define rSDIBSIZE (*(volatile unsigned *)0x5a000028) //SDI block size
#define rSDIDCON (*(volatile unsigned *)0x5a00002c) //SDI data control
#define rSDIDCNT (*(volatile unsigned *)0x5a000030) //SDI data remain counter
#define rSDIDSTA (*(volatile unsigned *)0x5a000034) //SDI data status
#define rSDIFSTA (*(volatile unsigned *)0x5a000038) //SDI FIFO status
#define rSDIIMSK (*(volatile unsigned *)0x5a00003c) //SDI interrupt mask
#ifdef __BIG_ENDIAN
#define rSDIDAT (*(volatile unsigned *)0x5a00004c) //SDI data
#define SDIDAT 0x5a00004c
#else // Little Endian
#define rSDIDAT (*(volatile unsigned *)0x5a000040) //SDI data
#define SDIDAT 0x5a000040
#endif //SD Interface
// ISR
#define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0))
#define pISR_UNDEF (*(unsigned *)(_ISR_STARTADDRESS+0x4))
#define pISR_SWI (*(unsigned *)(_ISR_STARTADDRESS+0x8))
#define pISR_PABORT (*(unsigned *)(_ISR_STARTADDRESS+0xc))
#define pISR_DABORT (*(unsigned *)(_ISR_STARTADDRESS+0x10))
#define pISR_RESERVED (*(unsigned *)(_ISR_STARTADDRESS+0x14))
#define pISR_IRQ (*(unsigned *)(_ISR_STARTADDRESS+0x18))
#define pISR_FIQ (*(unsigned *)(_ISR_STARTADDRESS+0x1c))
#define pISR_EINT0 (*(unsigned *)(_ISR_STARTADDRESS+0x20))
#define pISR_EINT1 (*(unsigned *)(_ISR_STARTADDRESS+0x24))
#define pISR_EINT2 (*(unsigned *)(_ISR_STARTADDRESS+0x28))
#define pISR_EINT3 (*(unsigned *)(_ISR_STARTADDRESS+0x2c))
#define pISR_EINT4_7 (*(unsigned *)(_ISR_STARTADDRESS+0x30))
#define pISR_EINT8_23 (*(unsigned *)(_ISR_STARTADDRESS+0x34))
#define pISR_NOTUSED6 (*(unsigned *)(_ISR_STARTADDRESS+0x38))
#define pISR_BAT_FLT (*(unsigned *)(_ISR_STARTADDRESS+0x3c))
#define pISR_TICK (*(unsigned *)(_ISR_STARTADDRESS+0x40))
#define pISR_WDT (*(unsigned *)(_ISR_STARTADDRESS+0x44))
#define pISR_TIMER0 (*(unsigned *)(_ISR_STARTADDRESS+0x48))
#define pISR_TIMER1 (*(unsigned *)(_ISR_STARTADDRESS+0x4c))
#define pISR_TIMER2 (*(unsigned *)(_ISR_STARTADDRESS+0x50))
#define pISR_TIMER3 (*(unsigned *)(_ISR_STARTADDRESS+0x54))
#define pISR_TIMER4 (*(unsigned *)(_ISR_STARTADDRESS+0x58))
#define pISR_UART2 (*(unsigned *)(_ISR_STARTADDRESS+0x5c))
#define pISR_LCD (*(unsigned *)(_ISR_STARTADDRESS+0x60))
#define pISR_DMA0 (*(unsigned *)(_ISR_STARTADDRESS+0x64))
#define pISR_DMA1 (*(unsigned *)(_ISR_STARTADDRESS+0x68))
#define pISR_DMA2 (*(unsigned *)(_ISR_STARTADDRESS+0x6c))
#define pISR_DMA3 (*(unsigned *)(_ISR_STARTADDRESS+0x70))
#define pISR_SDI (*(unsigned *)(_ISR_STARTADDRESS+0x74))
#define pISR_SPI0 (*(unsigned *)(_ISR_STARTADDRESS+0x78))
#define pISR_UART1 (*(unsigned *)(_ISR_STARTADDRESS+0x7c))
#define pISR_NFCON (*(unsigned *)(_ISR_STARTADDRESS+0x80)) // Added for 2440.
#define pISR_USBD (*(unsigned *)(_ISR_STARTADDRESS+0x84))
#define pISR_USBH (*(unsigned *)(_ISR_STARTADDRESS+0x88))
#define pISR_IIC (*(unsigned *)(_ISR_STARTADDRESS+0x8c))
#define pISR_UART0 (*(unsigned *)(_ISR_STARTADDRESS+0x90))
#define pISR_SPI1 (*(unsigned *)(_ISR_STARTADDRESS+0x94))
#define pISR_RTC (*(unsigned *)(_ISR_STARTADDRESS+0x98))
#define pISR_ADC (*(unsigned *)(_ISR_STARTADDRESS+0x9c))
// PENDING BIT
#define BIT_EINT0 (0x1)
#define BIT_EINT1 (0x1<<1)
#define BIT_EINT2 (0x1<<2)
#define BIT_EINT3 (0x1<<3)
#define BIT_EINT4_7 (0x1<<4)
#define BIT_EINT8_23 (0x1<<5)
#define BIT_NOTUSED6 (0x1<<6)
#define BIT_BAT_FLT (0x1<<7)
#define BIT_TICK (0x1<<8)
#define BIT_WDT (0x1<<9)
#define BIT_TIMER0 (0x1<<10)
#define BIT_TIMER1 (0x1<<11)
#define BIT_TIMER2 (0x1<<12)
#define BIT_TIMER3 (0x1<<13)
#define BIT_TIMER4 (0x1<<14)
#define BIT_UART2 (0x1<<15)
#define BIT_LCD (0x1<<16)
#define BIT_DMA0 (0x1<<17)
#define BIT_DMA1 (0x1<<18)
#define BIT_DMA2 (0x1<<19)
#define BIT_DMA3 (0x1<<20)
#define BIT_SDI (0x1<<21)
#define BIT_SPI0 (0x1<<22)
#define BIT_UART1 (0x1<<23)
#define BIT_NFCON (0x1<<24) // Added for 2440.
#define BIT_USBD (0x1<<25)
#define BIT_USBH (0x1<<26)
#define BIT_IIC (0x1<<27)
#define BIT_UART0 (0x1<<28)
#define BIT_SPI1 (0x1<<29)
#define BIT_RTC (0x1<<30)
#define BIT_ADC (0x1<<31)
#define BIT_ALLMSK (0xffffffff)
#define BIT_SUB_ALLMSK (0x7ff)
#define BIT_SUB_ADC (0x1<<10)
#define BIT_SUB_TC (0x1<<9)
#define BIT_SUB_ERR2 (0x1<<8)
#define BIT_SUB_TXD2 (0x1<<7)
#define BIT_SUB_RXD2 (0x1<<6)
#define BIT_SUB_ERR1 (0x1<<5)
#define BIT_SUB_TXD1 (0x1<<4)
#define BIT_SUB_RXD1 (0x1<<3)
#define BIT_SUB_ERR0 (0x1<<2)
#define BIT_SUB_TXD0 (0x1<<1)
#define BIT_SUB_RXD0 (0x1<<0)
#define ClearPending(bit) do {\
rSRCPND = bit;\
rINTPND = bit;\
(void)rINTPND;\
} while(0)
//Wait until rINTPND is changed for the case that the ISR is very short.
#ifdef __cplusplus
}
#endif
#endif //__2440ADDR_H___
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -