ex_sdram.c

NXP ARM处理器240*320液晶驱动程序（IAR开发环境）

/*****************************************************************************
 *   ex_sdram.c:  External SDRAM memory module file for NXP LPC24xx Family 
 *   Microprocessors
 *
 *   Copyright(C) 2006, NXP Semiconductor
 *   All rights reserved.
 *
 *   History
 *   2007.01.13  ver 1.00    Prelimnary version, first Release
 *
******************************************************************************/
#include "iolpc2468.h"				/* LPC24xx definitions */
#include "data_types.h"
#include "irq.h"
#include "ex_sdram.h"
#include "lpc2478.h"

/*****************************************************************************
** Function name:		SDRAMInit
**
** Descriptions:		Initialize external SDRAM memory Samsung 
**						K4S561632H, 256Mbit(4M x 16 bit). The same
**						code can be used for the Micron's MT48LC16M 
** 						For more info. regarding the details of the 
**						SDRAMs, go to their website for data sheet.  
**
** parameters:			None			 
** 						
** Returned value:		None
** 
*****************************************************************************/
void SDRAMInit( void )
{
  INT32U i;
  volatile INT32U dummy;
  
  /*************************************************************************
  * Initialize EMC and SDRAM
  *************************************************************************/
  //SCS     |= 0x00000002;		/* Reset EMC */ 
  EMC_CTRL = 0x00000001;		/*Disable Address mirror*/
  PCONP   |= 0x00000800;		/* Turn On EMC PCLK */
  PINSEL4  = 0x50000000;
  PINSEL5  = 0x05050555;
  PINSEL6  = 0x55555555;
  PINSEL8  = 0x55555555;
  PINSEL9  = 0x50555555;  
  
  EMC_DYN_RP     = 2;		/* command period: 3(n+1) clock cycles */
  EMC_DYN_RAS    = 3;		/* RAS command period: 4(n+1) clock cycles */
  EMC_DYN_SREX   = 7;		/* Self-refresh period: 8(n+1) clock cycles */
  EMC_DYN_APR    = 2;		/* Data out to active: 3(n+1) clock cycles */
  EMC_DYN_DAL    = 5;		/* Data in to active: 5(n+1) clock cycles */
  EMC_DYN_WR     = 1;		/* Write recovery: 2(n+1) clock cycles */
  EMC_DYN_RC     = 5;		/* Active to Active cmd: 6(n+1) clock cycles */
  EMC_DYN_RFC    = 5;		/* Auto-refresh: 6(n+1) clock cycles */
  EMC_DYN_XSR    = 7;		/* Exit self-refresh: 8(n+1) clock cycles */
  EMC_DYN_RRD    = 1;		/* Active bank A->B: 2(n+1) clock cycles */
  EMC_DYN_MRD    = 2;		/* Load Mode to Active cmd: 3(n+1) clock cycles */

  EMC_DYN_RD_CFG = 1;		/* Command delayed strategy */

  /* Default setting, RAS latency 3 CCLKs, CAS latenty 3 CCLKs. */
  EMC_DYN_RASCAS0 = 0x00000303;

  /* 256MB, 16Mx16, 4 banks, row=13, column=9 */
  EMC_DYN_CFG0 = 0x00000680;
  delayMs(100);

  /* Mem clock enable, CLKOUT runs, send command: NOP */
  EMC_DYN_CTRL = 0x00000183;
  delayMs(200);
    
  /* Send command: PRECHARGE-ALL, shortest possible refresh period */
  EMC_DYN_CTRL = 0x00000103;

  /* set 32 CCLKs between SDRAM refresh cycles */
  EMC_DYN_RFSH = 0x00000002;
  for(i = 0; i < 0x40; i++);	/* wait 128 AHB clock cycles */
    
  /* set 28 x 16CCLKs=448CCLK=7us between SDRAM refresh cycles */
  EMC_DYN_RFSH = 28;
    
  /* To set mode register in SDRAM, enter mode by issue
  MODE command, after finishing, bailout and back to NORMAL mode. */    
  /* Mem clock enable, CLKOUT runs, send command: MODE */
  EMC_DYN_CTRL = 0x00000083;
  
  /* Set mode register in SDRAM */
  /* Mode regitster table for Micron's MT48LCxx */
  /* bit 9:   Programmed burst length(0)
     bit 8~7: Normal mode(0)
	 bit 6~4: CAS latency 3
	 bit 3:   Sequential(0)
	 bit 2~0: Burst length is 8
	 row position is 12 */
  dummy = *((volatile INT32U *)(SDRAM_BASE_ADDR | (0x33 << 12)));
  
  EMC_DYN_CTRL = 0x00000000;	  /* Send command: NORMAL */

  EMC_DYN_CFG0 |= 0x00080000;	  /* Enable buffer */
  delayMs(1);
  return;

}


/*********************************************************************************
**                           Memory Clear
*********************************************************************************/
void ClearMemory(void)
{
	INT32S *pt;

	pt=(INT32S *)(SDRAM_BASE);
	while((INT32S)pt < SDRAM_END)
	{
		*pt=(INT32S)0x0;
		pt++;
	}
	

}