lcd_params.c

NXP ARM处理器240*320液晶驱动程序（IAR开发环境）

/***********************************************************************
 * File:   lcd_params.c
 * Rev:    1.0
 * Author: Chun Sing Chu
 * Date:   March 26 2007
 *
 * Description:
 *     This file contains parameters for LCD panel used on FCC1 board.
 *
 * Revision History:
 * Rev 1.0 March 26 2007
 * Initial revision.
 *
 **********************************************************************/

#include "lcd_params.h"

/* Sharp LQ035 portrait mode ADTFT display parameters */
const LCD_PARAM_T dh240 =
{
    40,        /* Horizontal back porch */
    10,       /* Horizontal front porch */
    28,       /* HSYNC pulse width */
    320,      /* Pixels per line */
    20,        /* Vertical back porch */
    20,       /* Vertical front porch */
    10,        /* VSYNC pulse width */
    240,      /* Lines per panel */
    0,        /* Do not invert output enable */
    1,        /* Invert panel clock */
    1,        /* Do not Invert HSYNC */
    0,        /* Do not invert VSYNC */
    1,        /* AC bias frequency (not used) */
    16,       /* Bits per pixel */
    6500000,  /* Optimal clock rate (Hz) */
    ADTFT,    /* LCD panel type */
    0,        /* Single panel display */
};