collections.java

This is a resource based on j2me embedded,if you dont understand,you can connection with me .

	    if (cmp < 0)
		low = mid + 1;
	    else if (cmp > 0)
		high = mid - 1;
	    else
		return mid; // key found
	}
	return -(low + 1);  // key not found
    }

    private static int iteratorBinarySearch(List l, Object key, Comparator c) {
	int low = 0;
	int high = l.size()-1;
        ListIterator i = l.listIterator();

        while (low <= high) {
            int mid = (low + high) >> 1;
            Object midVal = get(i, mid);
            int cmp = c.compare(midVal, key);

            if (cmp < 0)
                low = mid + 1;
            else if (cmp > 0)
                high = mid - 1;
            else
                return mid; // key found
        }
        return -(low + 1);  // key not found
    }

    /**
     * Reverses the order of the elements in the specified list.<p>
     *
     * This method runs in linear time.
     *
     * @param  list the list whose elements are to be reversed.
     * @throws UnsupportedOperationException if the specified list or
     *         its list-iterator does not support the <tt>set</tt> method.
     */
    public static void reverse(List list) {
        int size = list.size();
        if (size < REVERSE_THRESHOLD || list instanceof RandomAccess) {
            for (int i=0, mid=size>>1, j=size-1; i<mid; i++, j--)
                swap(list, i, j);
        } else {
            ListIterator fwd = list.listIterator();
            ListIterator rev = list.listIterator(size);
            for (int i=0, mid=list.size()>>1; i<mid; i++) {
                Object tmp = fwd.next();
                fwd.set(rev.previous());
                rev.set(tmp);
            }
        }
    }

    /**
     * Randomly permutes the specified list using a default source of
     * randomness.  All permutations occur with approximately equal
     * likelihood.<p>
     *
     * The hedge "approximately" is used in the foregoing description because
     * default source of randomenss is only approximately an unbiased source
     * of independently chosen bits. If it were a perfect source of randomly
     * chosen bits, then the algorithm would choose permutations with perfect
     * uniformity.<p>
     *
     * This implementation traverses the list backwards, from the last element
     * up to the second, repeatedly swapping a randomly selected element into
     * the "current position".  Elements are randomly selected from the
     * portion of the list that runs from the first element to the current
     * position, inclusive.<p>
     *
     * This method runs in linear time.  If the specified list does not
     * implement the {@link RandomAccess} interface and is large, this
     * implementation dumps the specified list into an array before shuffling
     * it, and dumps the shuffled array back into the list.  This avoids the
     * quadratic behavior that would result from shuffling a "sequential
     * access" list in place.
     *
     * @param  list the list to be shuffled.
     * @throws UnsupportedOperationException if the specified list or
     *         its list-iterator does not support the <tt>set</tt> method.
     */
    public static void shuffle(List list) {
        shuffle(list, r);
    }
    private static Random r = new Random();

    /**
     * Randomly permute the specified list using the specified source of
     * randomness.  All permutations occur with equal likelihood
     * assuming that the source of randomness is fair.<p>
     *
     * This implementation traverses the list backwards, from the last element
     * up to the second, repeatedly swapping a randomly selected element into
     * the "current position".  Elements are randomly selected from the
     * portion of the list that runs from the first element to the current
     * position, inclusive.<p>
     *
     * This method runs in linear time.  If the specified list does not
     * implement the {@link RandomAccess} interface and is large, this
     * implementation dumps the specified list into an array before shuffling
     * it, and dumps the shuffled array back into the list.  This avoids the
     * quadratic behavior that would result from shuffling a "sequential
     * access" list in place.
     *
     * @param  list the list to be shuffled.
     * @param  rnd the source of randomness to use to shuffle the list.
     * @throws UnsupportedOperationException if the specified list or its
     *         list-iterator does not support the <tt>set</tt> operation.
     */
    public static void shuffle(List list, Random rnd) {
        int size = list.size();
        if (size < SHUFFLE_THRESHOLD || list instanceof RandomAccess) {
            for (int i=size; i>1; i--)
                swap(list, i-1, rnd.nextInt(i));
        } else {
            Object arr[] = list.toArray();

            // Shuffle array
            for (int i=size; i>1; i--)
                swap(arr, i-1, rnd.nextInt(i));

            // Dump array back into list
            ListIterator it = list.listIterator();
            for (int i=0; i<arr.length; i++) {
                it.next();
                it.set(arr[i]);
            }
        }
    }

    /**
     * Swaps the elements at the specified positions in the specified list.
     * (If the specified positions are equal, invoking this method leaves
     * the list unchanged.)
     *
     * @param list The list in which to swap elements.
     * @param i the index of one element to be swapped.
     * @param j the index of the other element to be swapped.
     * @throws IndexOutOfBoundsException if either <tt>i</tt> or <tt>j</tt>
     *         is out of range (i &lt; 0 || i &gt;= list.size()
     *         || j &lt; 0 || j &gt;= list.size()).
     * @since 1.4
     */
    public static void swap(List list, int i, int j) {
        list.set(i, list.set(j, list.get(i)));
    }

    /**
     * Swaps the two specified elements in the specified array.
     */
    private static void swap(Object[] arr, int i, int j) {
        Object tmp = arr[i];
        arr[i] = arr[j];
        arr[j] = tmp;
    }

    /**
     * Replaces all of the elements of the specified list with the specified
     * element. <p>
     *
     * This method runs in linear time.
     *
     * @param  list the list to be filled with the specified element.
     * @param  obj The element with which to fill the specified list.
     * @throws UnsupportedOperationException if the specified list or its
     *	       list-iterator does not support the <tt>set</tt> operation.
     */
    public static void fill(List list, Object obj) {
        int size = list.size();

        if (size < FILL_THRESHOLD || list instanceof RandomAccess) {
            for (int i=0; i<size; i++)
                list.set(i, obj);
        } else {
            ListIterator itr = list.listIterator();
            for (int i=0; i<size; i++) {
                itr.next();
                itr.set(obj);
            }
        }
    }

    /**
     * Copies all of the elements from one list into another.  After the
     * operation, the index of each copied element in the destination list
     * will be identical to its index in the source list.  The destination
     * list must be at least as long as the source list.  If it is longer, the
     * remaining elements in the destination list are unaffected. <p>
     *
     * This method runs in linear time.
     *
     * @param  dest The destination list.
     * @param  src The source list.
     * @throws IndexOutOfBoundsException if the destination list is too small
     *         to contain the entire source List.
     * @throws UnsupportedOperationException if the destination list's
     *         list-iterator does not support the <tt>set</tt> operation.
     */
    public static void copy(List dest, List src) {
        int srcSize = src.size();
        if (srcSize > dest.size())
            throw new IndexOutOfBoundsException("Source does not fit in dest");

        if (srcSize < COPY_THRESHOLD ||
            (src instanceof RandomAccess && dest instanceof RandomAccess)) {
            for (int i=0; i<srcSize; i++)
                dest.set(i, src.get(i));
        } else {
            ListIterator di=dest.listIterator(), si=src.listIterator();
            for (int i=0; i<srcSize; i++) {
                di.next();
                di.set(si.next());
            }
        }
    }

    /**
     * Returns the minimum element of the given collection, according to the
     * <i>natural ordering</i> of its elements.  All elements in the
     * collection must implement the <tt>Comparable</tt> interface.
     * Furthermore, all elements in the collection must be <i>mutually
     * comparable</i> (that is, <tt>e1.compareTo(e2)</tt> must not throw a
     * <tt>ClassCastException</tt> for any elements <tt>e1</tt> and
     * <tt>e2</tt> in the collection).<p>
     *
     * This method iterates over the entire collection, hence it requires
     * time proportional to the size of the collection.
     *
     * @param  coll the collection whose minimum element is to be determined.
     * @return the minimum element of the given collection, according
     *         to the <i>natural ordering</i> of its elements.
     * @throws ClassCastException if the collection contains elements that are
     *	       not <i>mutually comparable</i> (for example, strings and
     *	       integers).
     * @throws NoSuchElementException if the collection is empty.
     * @see Comparable
     */
    public static Object min(Collection coll) {
	Iterator i = coll.iterator();
	Comparable candidate = (Comparable)(i.next());

        while(i.hasNext()) {
	    Comparable next = (Comparable)(i.next());
	    if (next.compareTo(candidate) < 0)
		candidate = next;
	}
	return candidate;
    }

    /**
     * Returns the minimum element of the given collection, according to the
     * order induced by the specified comparator.  All elements in the
     * collection must be <i>mutually comparable</i> by the specified
     * comparator (that is, <tt>comp.compare(e1, e2)</tt> must not throw a
     * <tt>ClassCastException</tt> for any elements <tt>e1</tt> and
     * <tt>e2</tt> in the collection).<p>
     *
     * This method iterates over the entire collection, hence it requires
     * time proportional to the size of the collection.
     *
     * @param  coll the collection whose minimum element is to be determined.
     * @param  comp the comparator with which to determine the minimum element.
     *         A <tt>null</tt> value indicates that the elements' <i>natural
     *         ordering</i> should be used.
     * @return the minimum element of the given collection, according
     *         to the specified comparator.
     * @throws ClassCastException if the collection contains elements that are
     *	       not <i>mutually comparable</i> using the specified comparator.
     * @throws NoSuchElementException if the collection is empty.
     * @see Comparable
     */
    public static Object min(Collection coll, Comparator comp) {
        if (comp==null)
            return min(coll);

	Iterator i = coll.iterator();
	Object candidate = i.next();

        while(i.hasNext()) {
	    Object next = i.next();
	    if (comp.compare(next, candidate) < 0)
		candidate = next;
	}
	return candidate;
    }

    /**
     * Returns the maximum element of the given collection, according to the
     * <i>natural ordering</i> of its elements.  All elements in the
     * collection must implement the <tt>Comparable</tt> interface.
     * Furthermore, all elements in the collection must be <i>mutually
     * comparable</i> (that is, <tt>e1.compareTo(e2)</tt> must not throw a
     * <tt>ClassCastException</tt> for any elements <tt>e1</tt> and
     * <tt>e2</tt> in the collection).<p>
     *
     * This method iterates over the entire collection, hence it requires
     * time proportional to the size of the collection.
     *
     * @param  coll the collection whose maximum element is to be determined.
     * @return the maximum element of the given collection, according
     *         to the <i>natural ordering</i> of its elements.
     * @throws ClassCastException if the collection contains elements that are
     *	       not <i>mutually comparable</i> (for example, strings and
     *         integers).
     * @throws NoSuchElementException if the collection is empty.
     * @see Comparable
     */
    public static Object max(Collection coll) {
	Iterator i = coll.iterator();
	Comparable candidate = (Comparable)(i.next());

        while(i.hasNext()) {
	    Comparable next = (Comparable)(i.next());
	    if (next.compareTo(candidate) > 0)
		candidate = next;
	}
	return candidate;
    }

    /**
     * Returns the maximum element of the given collection, according to the
     * order induced by the specified comparator.  All elements in the
     * collection must be <i>mutually comparable</i> by the specified
     * comparator (that is, <tt>comp.compare(e1, e2)</tt> must not throw a
     * <tt>ClassCastException</tt> for any elements <tt>e1</tt> and
     * <tt>e2</tt> in the collection).<p>
     *
     * This method iterates over the entire collection, hence it requires
     * time proportional to the size of the collection.
     *