00readme.txt

来自「s12（x）s 系列 BDM 制作原理图及相关驱动 s12 (x) s ser」· 文本 代码 · 共 60 行

File descriptions:

1) bin_jb8_xx.zip				

binary of the HC08JB8 firmware
you need to download this into internal flash of the HC08JB before you use the 
interface for the first time

2) bin_tbdml_dll_xx.zip

binary of the TBDML.DLL
this is what you need if you are planning to use the interface from another program

3) bin_tbdml_gdi_dll_xx.zip 		

GDI interface DLL for MW Hiwave debugger
you need this file if you are planning to use the interface with the MW debugger

4) bin_tbdml_win_driver_11.zip 

compilation of different DLLs and the USB driver needed to install the interface
as a device under Windows

5) libusb-win32-device-bin-0.1.10.1.tar.gz 

original distribution of the USB driver I am using to talk to the interface

6) license_gpl.txt 

license - read it before you use any of the files to make sure you undestand and
agree with all the terms

7) sw_jb8_02.zip 

source code of the firmware for the HC08JB8

8) sw_tbdml_dll_11.zip 

source code of the TBDML.DLL

9) tbdml_manual_12.pdf 

user's manual

10) tbdml_pcb_10A.zip 

gerber files for the PCB



Changes:

v11d: 	added tbdml.exp and tbdml.lib to bin_tbdml_dll_11.zip 
	added missing tbdml_hwdesc.h into sw_tbdml_dll_11.zip 
	added the 00readme.txt for better orientation

v11e:	C9 and C12 did not agree between schematic and PCB in the doc. Changed the schematic.

v11f:   Behaviour of the debugger was not correct during external target reset. 
	New DLL for Hi-wave and new firmware for the cable generated.