configure

linux 下的源代码分析阅读器 red hat公司新版

  if (child == 0) {
    /* Here is another test for sparc vfork register problems.
       This test uses lots of local variables, at least
       as many local variables as main has allocated so far
       including compiler temporaries.  4 locals are enough for
       gcc 1.40.3 on a sparc, but we use 8 to be safe.
       A buggy compiler should reuse the register of parent
       for one of the local variables, since it will think that
       parent can't possibly be used any more in this routine.
       Assigning to the local variable will thus munge parent
       in the parent process.  */
    pid_t
      p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
      p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
    /* Convince the compiler that p..p7 are live; otherwise, it might
       use the same hardware register for all 8 local variables.  */
    if (p != p1 || p != p2 || p != p3 || p != p4
	|| p != p5 || p != p6 || p != p7)
      _exit(1);

    /* On some systems (e.g. SunOS 5.2), if the parent is catching
       a signal, the child ignores the signal before execing,
       and the parent later receives that signal, the parent dumps core.
       Test for this by ignoring SIGINT in the child.  */
    signal (SIGINT, SIG_IGN);

    /* On some systems (e.g. IRIX 3.3),
       vfork doesn't separate parent from child file descriptors.
       If the child closes a descriptor before it execs or exits,
       this munges the parent's descriptor as well.
       Test for this by closing stdout in the child.  */
    _exit(close(fileno(stdout)) != 0);
  } else {
    int status;
    struct stat st;

    while (wait(&status) != child)
      ;
    exit(
	 /* Was there some problem with vforking?  */
	 child < 0

	 /* Did the child fail?  (This shouldn't happen.)  */
	 || status

	 /* Did the vfork/compiler bug occur?  */
	 || parent != getpid()

	 /* Did the signal handling bug occur?  */
	 || kill(parent, SIGINT) != 0
	 || signalled != 1

	 /* Did the file descriptor bug occur?  */
	 || fstat(fileno(stdout), &st) != 0
	 );
  }
}
EOF
eval $ac_link
if test -s conftest && (./conftest; exit) 2>/dev/null; then
  ac_cv_func_vfork=yes
else
  ac_cv_func_vfork=no
fi
fi
rm -fr conftest*
fi
echo "$ac_t""$ac_cv_func_vfork" 1>&4
if test $ac_cv_func_vfork = no; then
  cat >> confdefs.h <<\EOF
#define vfork fork
EOF

fi

for ac_func in gethostname setrlimit waitpid strdup setsockopt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&4
if eval "test \"`echo '${'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&4
else
  cat > conftest.$ac_ext <<EOF
#line 1425 "configure"
#include "confdefs.h"
#include <ctype.h> /* Arbitrary system header to define __stub macros. */
/* Override any gcc2 internal prototype to avoid an error.  */
char $ac_func(); 

int main() { return 0; }
int t() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if eval $ac_link; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*

fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&4
    ac_tr_func=HAVE_`echo $ac_func | tr '[a-z]' '[A-Z]'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&4
fi
done

for ac_func in sigprocmask uname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&4
if eval "test \"`echo '${'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&4
else
  cat > conftest.$ac_ext <<EOF
#line 1474 "configure"
#include "confdefs.h"
#include <ctype.h> /* Arbitrary system header to define __stub macros. */
/* Override any gcc2 internal prototype to avoid an error.  */
char $ac_func(); 

int main() { return 0; }
int t() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if eval $ac_link; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*

fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&4
    ac_tr_func=HAVE_`echo $ac_func | tr '[a-z]' '[A-Z]'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&4
fi
done


trap '' 1 2 15
if test -w $cache_file; then
echo "updating cache $cache_file"
cat > $cache_file <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# Ultrix sh set writes to stderr and can't be redirected directly.
(set) 2>&1 |
  sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/: \${\1='\2'}/p" \
  >> $cache_file
else
echo "not updating unwritable cache $cache_file"
fi

trap 'rm -fr conftest* confdefs* core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#!/bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.1"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr sds/Makefile editline/Makefile glish/Makefile glish/clients/Makefile glish/config.h conftest*; exit 1' 1 2 15

# Protect against being on the right side of a sed subst in config.status. 
sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\\\&%]/\\\\&/g; 
 s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
$ac_vpsub
$extrasub
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@CC@%$CC%g
s%@CXX@%$CXX%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@RANLIB@%$RANLIB%g
s%@YACC@%$YACC%g
s%@RSH@%$RSH%g
s%@CPP@%$CPP%g

CEOF
EOF
cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"sds/Makefile editline/Makefile glish/Makefile glish/clients/Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust relative srcdir, etc. for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/$ac_dir"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac
  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
rm -f conftest.subs

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

CONFIG_HEADERS=${CONFIG_HEADERS-"glish/config.h"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  cp $ac_given_srcdir/$ac_file_in conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status. 
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
# Maximum number of lines to put in a single here document.
ac_max_here_lines=12

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done



exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS