readme

its a full portscan... it works for all type of scanning. here we use libcap

============================================================
               Dynamic Port Scanner [DPS] v1.1
  A port scanner based on ARP poisoning/spoofing technique
                      (c) 2006 - 2008
                 AR Samhuri <[e-mail]>
                  (http://www.securebits.org)
============================================================

 0x00  Introduction
 0x01  Features of DPS Tool
 0x02  Installation
 0x03  Running DPS Tool
 0x04  Copyright
 0x05  Disclaimer


0x00 Introduction
-----------------
     Dynamic Port Scanner [DPS] is a port scanner with a 
functionality that allows for dynamic spoofing of source IP 
addresses of scanning packets. The whole idea is based on 
integrating ARP poisoning technique into the scanning 
process. That is, for each TCP/UDP scan packet with a spoofed 
source IP address, the program will poison the ARP cache of 
the remote host/gateway in such a way that the scan reply 
packet (TCP, UDP, or ICMP) will be delivered to the scanning 
machine. Obviously, the spoofed IP must fall within the local 
network IP range of the scanning machine.

When starting scanning a host, DPS will first identify 
whether the target host is within the local network or not. 
If it is within the local network, that host will be the 
target of ARP poisoning as well as the scanning process. If 
it is NOT within the local network, DPS will identify the 
gateway as the ARP poisoning target. In the second case, the 
ARP cache of the gateway is poisoned so that scan replies 
coming from the target host will arrive to the local scanning 
machine.

     DPS supports 11 scanning methods: 10 methods for TCP scan 
and 1 method for UDP scan. The 10 TCP scan methods are: SYN, FIN, 
NULL, ACK, URG, PSH, XMAS, XMAS1, XMAS2, and XMAS3.

     The home page of DPS tool is:
     (http://www.securebits.org/dps.html)  

0x01  Features of DPS Tool
--------------------------
    0x00   DPS features 10 different TCP stealth scanning
           techniques. These are: SYN, FIN, NULL, ACK, URG, PSH,
           XMAS, XMAS1, XMAS2, XMAS3. (check sec. 0x03 for more
           information). Those 10 techniques can be grouped into
           three categories. The first category includes only the
           SYN scan. It is the most reliable among the others. It
           can identify the port as open of closed. The second
           group contains the ACK scan. This scan has one
           functionality, which is to determine if the port is
           filtered or not. The third group contains all the
           other 8 techniques. These techniques will identify
           if the port is closed or either open or filtered.
           One should note that scanning windows system with
           one of these techniques always shows a result of
           closed port.

    0x01   DPS differentiate between a scanned host withing the
           local net and a host outside the local net. If the
           scanned host is within the local net, it is the target
           of ARP poisoning. It not, the gateway/router will be
           the target of ARP poisoning.

    0x02   Generation of spoofed source IPs is random and based
           on PRNG functions of Libnet. However, those spoofed
           IPs are always adjusted to fall in the subnet IP range
           of the scanning machine. For instance, if the scanning
           machine is in class B subnet, the spoofed IPs range
           from x.x.0.1 to x.x.255.254.

    0x03   The spoofed source IP will never match the IP of the
           scanned machine if it is within the local net. The
           reason is that one cannot ARP-poison a host with fake
           info about the machine itself.

    0x04   With the use of -w option, the port status output will
           have two different values. One for systems that follow
           TCP/IP standards (i.e. Linux and UNIX-like) and one
           for systems that violates TCP/IP standards (i.e.
           Windows and Cisco Devices). One should note that the
           differences occure only when scanning using group III
           techniques (PSH, URG, FIN, NULL, XMAS, XMAS1, XMAS2,
           and XMAS3.)

    0x05   When generating the scan output. DPS shows the spoofed
           IP used when scanning each port. And this IP will be
           resolved to hostname as well. One should note that
           even if the spoofed IP is not used in the local net,
           it can be used without affecting the scan process at
           all.

0x02  Installation
------------------
NOTE: before installing DPS, make sure to have libpcap and libnet
      installed on your machine.
      get libnet from:  http://www.packetfactory.net/libnet
      get libpcap from: http://www.tcpdump.org

To install:

     #tar dps-xxx.tar.gz
     #cd dps-xxx
     #make && make install
To uninstall:
     # make uninstall

0x03  Running DPS Tool
----------------------
#./dps [options] host|ip
     [options]
     -t <type>   This will define the scan type.
                 S     SYN Scan (Default). Only the SYN bit is 
                       set in the TCP scan packet. If SYN/ACK 
                       is received, the port is open. If RST/ACK
                       is received, the port is closed.
                 N     NULL Scan. All flags are not set in the 
                       TCP scan packet. If RST/ACK is received, 
                       the port is closed. If no reply is 
                       received, the port is either open or 
                       filtered.
                 F     FIN Scan. Only the FIN bit is set in the 
                       TCP scan packet. If RST/ACK is received, 
                       the port is closed. If no reply is 
                       received, the port is either open or 
                       filtered.
                 P     PSH Scan. Only the PSH bit is set in the 
                       TCP scan packet. If RST/ACK is received, 
                       the port is closed. If no reply is 
                       received, the port is either open or 
                       filtered.
                 A     ACK Scan. Only the ACK bit is set in the 
                       TCP scan packet. If RST is received, the 
                       port is unfiltered. If no reply is 
                       received, the port is filtered.
                 U     URG Scan. Only the URG bit is set in the 
                       TCP scan packet. If RST/ACK is received, 
                       the port is closed. If no reply is 
                       received, the port is either open or 
                       filtered.
                 X     XMAS Scan. Bits PSH, URG, and FIN are set
                       in the TCP scan packet. If RST/ACK is 
                       received, the port is closed. If no 
                       reply is received, the port is either 
                       open or closed.
                 X1    XMAS1 Scan. Bits PSH and FIN are set in
                       the TCP scan packet. If RST/ACK is 
                       received, the port is closed. If no 
                       reply is received, the port is either 
                       open or closed.
                 X2    XMAS2 Scan. Bits URG and FIN are set in
                       the TCP scan packet. If RST/ACK is 
                       received, the port is closed. If no 
                       reply is received, the port is either 
                       open or closed.
                 X3    XMAS3 Scan. Bits URG and PSH are set in
                       the TCP scan packet. If RST/ACK is 
                       received, the port is closed. If no 
                       reply is received, the port is either 
                       open or closed.
                 UDP   UDP scan. UDP packet is sent. If ICMP
                       port unreachable packet is received. If
                       no reply is received, the port is
                       filtered or open. If UDP packet is
                       received, the port is open.

     -p <ports>  Ports to scan (Default: 1-1024)
                 port list should be in the format:
                 x-y,z (e.g. 1-100,5000 or 1-200,900-1024)

     -i <if>     Interface to use (Optional) (e.g. eth0)

     -T <secs>   Scan time-out in seconds. Waiting for scan
                 response will timeout after <secs> seconds.

     -P <no>     PING option (Default: 1)
                  0   DONT PING
                  1   PING
                 If the PING option is on and the target host is
                 unPINGable, the program will terminate.
     -d          Do NOT resolve hostname or lookup IP addresses
     -w          Show port status if the scanned host is Windows
     -h          Drop the help menu.
     -v[v]       Output verbosity.

0x04  Copyright
---------------
This tool is distributed under the GNU General Public Lisence.
Check the COPYING file for more details on the lisence.

0x05  Disclaimer
----------------
This tool was develped for legal uses only. These include, but
not not limited to, penetration testing, vulnerability 
assessment, security auditing, educational experiments, and
ethical hacking. The author hereby disclaims himself of any 
damage caused by any illegal or lame usage of such tool.

EOF