readme.binutils

数值计算工具库,C语言编写的,可以直接调用.

If you are using blitz with egcs under Solaris, SunOS, or OSF/1
you may need to use the gnu linker.

You can download the binutils from ftp://prep.ai.mit.edu/gnu/binutils/

From Peter Nordlund:

My experience with blitz and sun is that you need the gnu linker.
At least I had the same problem, and by using gnu-binutils-2.9.1 I got
it to work.

It can be somewhat tricky to get egcs to use the gnu-linker also.
So how I do it migth not be the only way, but it worked for me.

1. Install binutils-2.9.1 
2. Create the bin directory where the egcs compiler will be installed.
3. create links from the linker and assembler to the egcs-bin-dir.
4. configure and install egcs.

See the commands I used below.
---------------------------
mkdir BUILD; cd BUILD
mkdir ../egcs-1.1a/bin
pushd ../egcs-1.1a/bin
ln -s /misc/cvap/gnu/binutils-2.9.1/bin/ld .
ln -s /misc/cvap/gnu/binutils-2.9.1/bin/as .
popd
../src/egcs-1.1a/configure --prefix=/misc/cvap/egcs/egcs-1.1a
--with-gnu-as --with-gnu-ld
make bootstrap-lean ; make install


> I am trying to get blitz++ going on a Sun Ultra-1 running Solaris 5.6.
> 
> The compiler is egcs 1.1b.
> 
> The make seems to go fine until we get to the examples:
> 
> > gmake[1]: Entering directory `/data/gaetz/blitz-19980903/examples'
> > g++  matmult.o -o matmult -L../lib -lblitz -lm
> > ld: warning: relocation error: R_SPARC_32: file matmult.o: symbol __Q25blitz
t13_bz_ArrayExpr1ZQ25blitzt15_bz_ArrayExprOp3ZQ25blitzt13_bz_ArrayExpr1ZQ25blitz
t20_bz_ArrayExprUnaryOp2ZQ25blitzt13_bz_ArrayExpr1ZQ25blitzt15_bz_ArrayExprOp3ZQ
25blitzt21_bz_ArrayExprConstant1ZfZQ25blitzt13_bz_ArrayExpr1ZQ25blitzt20_bz_Arra
yExprUnaryOp2ZQ25blitzt13_bz_ArrayExpr1ZQ25blitzt15_bz_ArrayExprOp3ZQ25blitzt13_
bz_ArrayExpr1ZQ25blitzt20_bz_ArrayExprUnaryOp2ZQ25blitzt13_bz_ArrayExpr1ZQ25blit
zt15_bz_ArrayExprOp3ZQ25blitzt16IndexPlaceholder1i0ZQ25blitzt21_bz_ArrayExprCons
tant1ZfZQ25blitzt8Subtract2ZiZfZQ25blitzt8_bz_pow21ZfZQ25blitzt13_bz_ArrayExpr1Z
Q25blitzt20_bz_ArrayExprUnaryOp2ZQ25blitzt13_bz_ArrayExpr1ZQ25blitzt15_bz_ArrayE
xprOp3ZQ25blitzt16IndexPlaceholder1i1ZQ25blitzt21_bz_ArrayExpr:
> >         external symbolic relocation against non-allocatable section .stab;
> >         cannot be processed at runtime: relocation ignored
> > Undefined                       first referenced
> >  symbol                             in file
> > __Q25blitzt13_bz_ArrayExpr1ZQ25blitzt15_bz_ArrayExprOp3ZQ25blitzt13_bz_Array
Expr1ZQ25blitzt20_bz_ArrayExprUnaryOp2ZQ25blitzt13_bz_ArrayExpr1ZQ25blitzt15_bz_
ArrayExprOp3ZQ25blitzt21_bz_ArrayExprConstant1ZfZQ25blitzt13_bz_ArrayExpr1ZQ25bl
itzt20_bz_ArrayExprUnaryOp2ZQ25blitzt13_bz_ArrayExpr1ZQ25blitzt15_bz_ArrayExprOp
3ZQ25blitzt13_bz_ArrayExpr1ZQ25blitzt20_bz_ArrayExprUnaryOp2ZQ25blitzt13_bz_Arra
yExpr1ZQ25blitzt15_bz_ArrayExprOp3ZQ25blitzt16IndexPlaceholder1i0ZQ25blitzt21_bz
_ArrayExprConstant1ZfZQ25blitzt8Subtract2ZiZfZQ25blitzt8_bz_pow21ZfZQ25blitzt13_
bz_ArrayExpr1ZQ25blitzt20_bz_ArrayExprUnaryOp2ZQ25blitzt13_bz_ArrayExpr1ZQ25blit
zt15_bz_ArrayExprOp3ZQ25blitzt16IndexPlaceholder1i1ZQ25blitzt21_bz_ArrayExpr mat
mult.o
> > ld: fatal: Symbol referencing errors. No output written to matmult
> > collect2: ld returned 1 exit status
> > gmake[1]: *** [matmult] Error 1
> 
> What is happening here?  Are there workarounds?