📄 at91sam7x256_pmc.h
字号:
/* linux/include/asm-arm/arch-at91sam7x256/at91sam7x256_pmc.h
*
* Hardware definition for the pmc peripheral in the ATMEL at91sam7x256 processor
*
* Generated 11/02/2005 (15:17:30) AT91 SW Application Group from PMC_SAM7X V1.4
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __AT91SAM7X256_PMC_H
#define __AT91SAM7X256_PMC_H
/* -------------------------------------------------------- */
/* PMC ID definitions for AT91SAM7X256 */
/* -------------------------------------------------------- */
#ifndef AT91C_ID_SYS
#define AT91C_ID_SYS 1 /**< System Peripheral id */
#endif /* AT91C_ID_SYS */
/* -------------------------------------------------------- */
/* PMC Base Address definitions for AT91SAM7X256 */
/* -------------------------------------------------------- */
#define AT91C_BASE_PMC 0xFFFFFC00 /**< PMC base address */
/* -------------------------------------------------------- */
/* PIO definition for PMC hardware peripheral */
/* -------------------------------------------------------- */
#define AT91C_PB0_PCK0 (1 << 0) /**< PMC Programmable Clock Output 0 */
#define AT91C_PA13_PCK1 (1 << 13) /**< PMC Programmable Clock Output 1 */
#define AT91C_PB22_PCK2 (1 << 22) /**< PMC Programmable Clock Output 2 */
#define AT91C_PA27_PCK3 (1 << 27) /**< PMC Programmable Clock Output 3 */
/* -------------------------------------------------------- */
/* Register offset definition for PMC hardware peripheral */
/* -------------------------------------------------------- */
#define PMC_SCER (0x0000) /**< System Clock Enable Register */
#define PMC_SCDR (0x0004) /**< System Clock Disable Register */
#define PMC_SCSR (0x0008) /**< System Clock Status Register */
#define PMC_PCER (0x0010) /**< Peripheral Clock Enable Register */
#define PMC_PCDR (0x0014) /**< Peripheral Clock Disable Register */
#define PMC_PCSR (0x0018) /**< Peripheral Clock Status Register */
#define PMC_MOR (0x0020) /**< Main Oscillator Register */
#define PMC_MCFR (0x0024) /**< Main Clock Frequency Register */
#define PMC_PLLR (0x002C) /**< PLL Register */
#define PMC_MCKR (0x0030) /**< Master Clock Register */
#define PMC_PCKR (0x0040) /**< Programmable Clock Register */
#define PMC_IER (0x0060) /**< Interrupt Enable Register */
#define PMC_IDR (0x0064) /**< Interrupt Disable Register */
#define PMC_SR (0x0068) /**< Status Register */
#define PMC_IMR (0x006C) /**< Interrupt Mask Register */
/* -------------------------------------------------------- */
/* Bitfields definition for PMC hardware peripheral */
/* -------------------------------------------------------- */
/* --- Register PMC_SCER */
#define AT91C_PMC_PCK (0x1 << 0 ) /**< (PMC) Processor Clock */
#define AT91C_PMC_UDP (0x1 << 7 ) /**< (PMC) USB Device Port Clock */
#define AT91C_PMC_PCK0 (0x1 << 8 ) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK1 (0x1 << 9 ) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK2 (0x1 << 10) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK3 (0x1 << 11) /**< (PMC) Programmable Clock Output */
/* --- Register PMC_SCDR */
#define AT91C_PMC_PCK (0x1 << 0 ) /**< (PMC) Processor Clock */
#define AT91C_PMC_UDP (0x1 << 7 ) /**< (PMC) USB Device Port Clock */
#define AT91C_PMC_PCK0 (0x1 << 8 ) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK1 (0x1 << 9 ) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK2 (0x1 << 10) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK3 (0x1 << 11) /**< (PMC) Programmable Clock Output */
/* --- Register PMC_SCSR */
#define AT91C_PMC_PCK (0x1 << 0 ) /**< (PMC) Processor Clock */
#define AT91C_PMC_UDP (0x1 << 7 ) /**< (PMC) USB Device Port Clock */
#define AT91C_PMC_PCK0 (0x1 << 8 ) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK1 (0x1 << 9 ) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK2 (0x1 << 10) /**< (PMC) Programmable Clock Output */
#define AT91C_PMC_PCK3 (0x1 << 11) /**< (PMC) Programmable Clock Output */
/* --- Register CKGR_MOR */
#define AT91C_CKGR_MOSCEN (0x1 << 0 ) /**< (PMC) Main Oscillator Enable */
#define AT91C_CKGR_OSCBYPASS (0x1 << 1 ) /**< (PMC) Main Oscillator Bypass */
#define AT91C_CKGR_OSCOUNT (0xFF << 8 ) /**< (PMC) Main Oscillator Start-up Time */
/* --- Register CKGR_MCFR */
#define AT91C_CKGR_MAINF (0xFFFF << 0 ) /**< (PMC) Main Clock Frequency */
#define AT91C_CKGR_MAINRDY (0x1 << 16) /**< (PMC) Main Clock Ready */
/* --- Register CKGR_PLLR */
#define AT91C_CKGR_DIV (0xFF << 0 ) /**< (PMC) Divider Selected */
#define AT91C_CKGR_DIV_0 0x0 /**< (PMC) Divider output is 0 */
#define AT91C_CKGR_DIV_BYPASS 0x1 /**< (PMC) Divider is bypassed */
#define AT91C_CKGR_PLLCOUNT (0x3F << 8 ) /**< (PMC) PLL Counter */
#define AT91C_CKGR_OUT (0x3 << 14) /**< (PMC) PLL Output Frequency Range */
#define AT91C_CKGR_OUT_0 (0x0 << 14) /**< (PMC) Please refer to the PLL datasheet */
#define AT91C_CKGR_OUT_1 (0x1 << 14) /**< (PMC) Please refer to the PLL datasheet */
#define AT91C_CKGR_OUT_2 (0x2 << 14) /**< (PMC) Please refer to the PLL datasheet */
#define AT91C_CKGR_OUT_3 (0x3 << 14) /**< (PMC) Please refer to the PLL datasheet */
#define AT91C_CKGR_MUL (0x7FF << 16) /**< (PMC) PLL Multiplier */
#define AT91C_CKGR_USBDIV (0x3 << 28) /**< (PMC) Divider for USB Clocks */
#define AT91C_CKGR_USBDIV_0 (0x0 << 28) /**< (PMC) Divider output is PLL clock output */
#define AT91C_CKGR_USBDIV_1 (0x1 << 28) /**< (PMC) Divider output is PLL clock output divided by 2 */
#define AT91C_CKGR_USBDIV_2 (0x2 << 28) /**< (PMC) Divider output is PLL clock output divided by 4 */
/* --- Register PMC_MCKR */
#define AT91C_PMC_CSS (0x3 << 0 ) /**< (PMC) Programmable Clock Selection */
#define AT91C_PMC_CSS_SLOW_CLK 0x0 /**< (PMC) Slow Clock is selected */
#define AT91C_PMC_CSS_MAIN_CLK 0x1 /**< (PMC) Main Clock is selected */
#define AT91C_PMC_CSS_PLL_CLK 0x3 /**< (PMC) Clock from PLL is selected */
#define AT91C_PMC_PRES (0x7 << 2 ) /**< (PMC) Programmable Clock Prescaler */
#define AT91C_PMC_PRES_CLK (0x0 << 2) /**< (PMC) Selected clock */
#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) /**< (PMC) Selected clock divided by 2 */
#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) /**< (PMC) Selected clock divided by 4 */
#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) /**< (PMC) Selected clock divided by 8 */
#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) /**< (PMC) Selected clock divided by 16 */
#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) /**< (PMC) Selected clock divided by 32 */
#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) /**< (PMC) Selected clock divided by 64 */
/* --- Register PMC_PCKR */
#define AT91C_PMC_CSS (0x3 << 0 ) /**< (PMC) Programmable Clock Selection */
#define AT91C_PMC_CSS_SLOW_CLK 0x0 /**< (PMC) Slow Clock is selected */
#define AT91C_PMC_CSS_MAIN_CLK 0x1 /**< (PMC) Main Clock is selected */
#define AT91C_PMC_CSS_PLL_CLK 0x3 /**< (PMC) Clock from PLL is selected */
#define AT91C_PMC_PRES (0x7 << 2 ) /**< (PMC) Programmable Clock Prescaler */
#define AT91C_PMC_PRES_CLK (0x0 << 2) /**< (PMC) Selected clock */
#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) /**< (PMC) Selected clock divided by 2 */
#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) /**< (PMC) Selected clock divided by 4 */
#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) /**< (PMC) Selected clock divided by 8 */
#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) /**< (PMC) Selected clock divided by 16 */
#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) /**< (PMC) Selected clock divided by 32 */
#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) /**< (PMC) Selected clock divided by 64 */
/* --- Register PMC_IER */
#define AT91C_PMC_MOSCS (0x1 << 0 ) /**< (PMC) MOSC Status/Enable/Disable/Mask */
#define AT91C_PMC_LOCK (0x1 << 2 ) /**< (PMC) PLL Status/Enable/Disable/Mask */
#define AT91C_PMC_MCKRDY (0x1 << 3 ) /**< (PMC) MCK_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK0RDY (0x1 << 8 ) /**< (PMC) PCK0_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK1RDY (0x1 << 9 ) /**< (PMC) PCK1_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK2RDY (0x1 << 10) /**< (PMC) PCK2_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK3RDY (0x1 << 11) /**< (PMC) PCK3_RDY Status/Enable/Disable/Mask */
/* --- Register PMC_IDR */
#define AT91C_PMC_MOSCS (0x1 << 0 ) /**< (PMC) MOSC Status/Enable/Disable/Mask */
#define AT91C_PMC_LOCK (0x1 << 2 ) /**< (PMC) PLL Status/Enable/Disable/Mask */
#define AT91C_PMC_MCKRDY (0x1 << 3 ) /**< (PMC) MCK_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK0RDY (0x1 << 8 ) /**< (PMC) PCK0_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK1RDY (0x1 << 9 ) /**< (PMC) PCK1_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK2RDY (0x1 << 10) /**< (PMC) PCK2_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK3RDY (0x1 << 11) /**< (PMC) PCK3_RDY Status/Enable/Disable/Mask */
/* --- Register PMC_SR */
#define AT91C_PMC_MOSCS (0x1 << 0 ) /**< (PMC) MOSC Status/Enable/Disable/Mask */
#define AT91C_PMC_LOCK (0x1 << 2 ) /**< (PMC) PLL Status/Enable/Disable/Mask */
#define AT91C_PMC_MCKRDY (0x1 << 3 ) /**< (PMC) MCK_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK0RDY (0x1 << 8 ) /**< (PMC) PCK0_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK1RDY (0x1 << 9 ) /**< (PMC) PCK1_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK2RDY (0x1 << 10) /**< (PMC) PCK2_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK3RDY (0x1 << 11) /**< (PMC) PCK3_RDY Status/Enable/Disable/Mask */
/* --- Register PMC_IMR */
#define AT91C_PMC_MOSCS (0x1 << 0 ) /**< (PMC) MOSC Status/Enable/Disable/Mask */
#define AT91C_PMC_LOCK (0x1 << 2 ) /**< (PMC) PLL Status/Enable/Disable/Mask */
#define AT91C_PMC_MCKRDY (0x1 << 3 ) /**< (PMC) MCK_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK0RDY (0x1 << 8 ) /**< (PMC) PCK0_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK1RDY (0x1 << 9 ) /**< (PMC) PCK1_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK2RDY (0x1 << 10) /**< (PMC) PCK2_RDY Status/Enable/Disable/Mask */
#define AT91C_PMC_PCK3RDY (0x1 << 11) /**< (PMC) PCK3_RDY Status/Enable/Disable/Mask */
#endif /* __AT91SAM7X256_PMC_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -