xianshi.fit

EDA条件下乘法器的实现。AHDL语言实现输入显示乘法等功能

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/10/2009 15:36:30      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "xianshi"
BEGIN

    DEVICE = "EPM7032SLC44-5";

    "a1"                           : INPUT_PIN  = 44     ;
    "a2"                           : INPUT_PIN  = 16     ; -- LC11
    "a3"                           : INPUT_PIN  = 14     ; -- LC10
    "a4"                           : INPUT_PIN  = 12     ; -- LC8
    "b1"                           : INPUT_PIN  = 11     ; -- LC7
    "b2"                           : INPUT_PIN  = 9      ; -- LC6
    "b3"                           : INPUT_PIN  = 8      ; -- LC5
    "b4"                           : INPUT_PIN  = 6      ; -- LC3
    "si"                           : INPUT_PIN  = 43     ;
    "ga1"                          : OUTPUT_PIN = 18     ; -- LC13
    "ga2"                          : OUTPUT_PIN = 20     ; -- LC15
    "ga3"                          : OUTPUT_PIN = 4      ; -- LC1
    "ga4"                          : OUTPUT_PIN = 17     ; -- LC12
    "ga5"                          : OUTPUT_PIN = 19     ; -- LC14
    "ga6"                          : OUTPUT_PIN = 5      ; -- LC2
    "ga7"                          : OUTPUT_PIN = 21     ; -- LC16
    "gb1"                          : OUTPUT_PIN = 37     ; -- LC21
    "gb2"                          : OUTPUT_PIN = 39     ; -- LC19
    "gb3"                          : OUTPUT_PIN = 41     ; -- LC17
    "gb4"                          : OUTPUT_PIN = 40     ; -- LC18
    "gb5"                          : OUTPUT_PIN = 36     ; -- LC22
    "gb6"                          : OUTPUT_PIN = 34     ; -- LC23
    "gb7"                          : OUTPUT_PIN = 33     ; -- LC24
    "gc1"                          : OUTPUT_PIN = 31     ; -- LC26
    "gc2"                          : OUTPUT_PIN = 24     ; -- LC32
    "gc3"                          : OUTPUT_PIN = 29     ; -- LC27
    "gc4"                          : OUTPUT_PIN = 28     ; -- LC28
    "gc5"                          : OUTPUT_PIN = 27     ; -- LC29
    "gc6"                          : OUTPUT_PIN = 26     ; -- LC30
    "gc7"                          : OUTPUT_PIN = 25     ; -- LC31

END;

INTERNAL_INFO "xianshi"
BEGIN
	DEVICE = EPM7032SLC44-5;
	LC16    : LORAX = "G54R0";
	LC2     : LORAX = "G10R0";
	LC14    : LORAX = "G52R0";
	LC12    : LORAX = "G37R0";
	LC1     : LORAX = "G9R0";
	LC15    : LORAX = "G53R0";
	LC13    : LORAX = "G51R0,PA28R0C0";
	LC24    : LORAX = "G33R0";
	LC23    : LORAX = "G32R0";
	LC22    : LORAX = "G31R0";
	LC18    : LORAX = "G14R0";
	LC17    : LORAX = "G13R0";
	LC19    : LORAX = "G15R0";
	LC21    : LORAX = "G30R0";
	LC31    : LORAX = "G57R0";
	LC30    : LORAX = "G56R0";
	LC29    : LORAX = "G55R0";
	LC28    : LORAX = "G41R0";
	LC27    : LORAX = "G40R0";
	LC32    : LORAX = "G58R0,PA29R0C0";
	LC26    : LORAX = "G39R0";
	OH7R0P12 : LORAX = "G63R0,PA33R0C0";
	OH9R0P14 : LORAX = "G1R0,PA4R0C0";
	OH10R0P16 : LORAX = "G2R0,PA0R0C0";
	OH33R0P44 : LORAX = "G42R0,PA18R0C0";
	OH2R0P6 : LORAX = "G45R0,PA22R0C1";
	OH4R0P8 : LORAX = "G60R0,PA29R0C1";
	OH5R0P9 : LORAX = "G61R0,PA28R0C1";
	OH6R0P11 : LORAX = "G62R0,PA31R0C1";
	OH32R0P43 : LORAX = "G59R0,PA27R0C1";
END;