avrdude.conf

A AVR USB download tool. It can download your target file to full series avr chip with only one pre

  desc  = "Atmel JTAG ICE (mkI)";
  baudrate = 115200;    # default is 115200
  type  = jtagmki;
;

# easier to type
programmer
  id    = "jtag1slow";
  desc  = "Atmel JTAG ICE (mkI)";
  baudrate = 19200;
  type  = jtagmki;
;

programmer
  id    = "jtagmkII";
  desc  = "Atmel JTAG ICE mkII";
  baudrate = 19200;    # default is 19200
  type  = jtagmkii;
;

# easier to type
programmer
  id    = "jtag2slow";
  desc  = "Atmel JTAG ICE mkII";
  baudrate = 19200;    # default is 19200
  type  = jtagmkii;
;

# JTAG ICE mkII @ 115200 Bd
programmer
  id    = "jtag2fast";
  desc  = "Atmel JTAG ICE mkII";
  baudrate = 115200;
  type  = jtagmkii;
;

# make the fast one the default, people will love that
programmer
  id    = "jtag2";
  desc  = "Atmel JTAG ICE mkII";
  baudrate = 115200;
  type  = jtagmkii;
;

# JTAG ICE mkII in ISP mode
programmer
  id    = "jtag2isp";
  desc  = "Atmel JTAG ICE mkII in ISP mode";
  baudrate = 115200;
  type  = jtagmkii_isp;
;

# JTAG ICE mkII in debugWire mode
programmer
  id    = "jtag2dw";
  desc  = "Atmel JTAG ICE mkII in debugWire mode";
  baudrate = 115200;
  type  = jtagmkii_dw;
;

# AVR Dragon in JTAG mode
programmer
  id    = "dragon_jtag";
  desc  = "Atmel AVR Dragon in JTAG mode";
  baudrate = 115200;
  type  = dragon_jtag;
;

# AVR Dragon in ISP mode
programmer
  id    = "dragon_isp";
  desc  = "Atmel AVR Dragon in ISP mode";
  baudrate = 115200;
  type  = dragon_isp;
;

# AVR Dragon in PP mode
programmer
  id    = "dragon_pp";
  desc  = "Atmel AVR Dragon in PP mode";
  baudrate = 115200;
  type  = dragon_pp;
;

# AVR Dragon in HVSP mode
programmer
  id    = "dragon_hvsp";
  desc  = "Atmel AVR Dragon in HVSP mode";
  baudrate = 115200;
  type  = dragon_hvsp;
;

# AVR Dragon in debugWire mode
programmer
  id    = "dragon_dw";
  desc  = "Atmel AVR Dragon in debugWire mode";
  baudrate = 115200;
  type  = dragon_dw;
;

programmer
  id    = "pavr";
  desc  = "Jason Kyle's pAVR Serial Programmer";
  type  = avr910;
;

# Parallel port programmers.

programmer
  id    = "bsd";
  desc  = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
  type  = par;
  vcc   = 2, 3, 4, 5;
  reset = 7;
  sck   = 8;
  mosi  = 9;
  miso  = 10;
;

programmer
  id    = "stk200";
  desc  = "STK200";
  type  = par;
  buff  = 4, 5;
  sck   = 6;
  mosi  = 7;
  reset = 9;
  miso  = 10;
;

# The programming dongle used by the popular Ponyprog
# utility.  It is almost similar to the STK200 one,
# except that there is a LED indicating that the
# programming is currently in progress.

programmer
  id    = "pony-stk200";
  desc  = "Pony Prog STK200";
  type  = par;
  buff  = 4, 5;
  sck   = 6;
  mosi  = 7;
  reset = 9;
  miso  = 10;
  pgmled = 8; 
;

programmer
  id    = "dt006";
  desc  = "Dontronics DT006";
  type  = par;
  reset = 4;
  sck   = 5;
  mosi  = 2;
  miso  = 11;
;

programmer
  id    = "bascom";
  desc  = "Bascom SAMPLE programming cable";
  type  = par;
  reset = 4;
  sck   = 5;
  mosi  = 2;
  miso  = 11;
;

programmer
  id     = "alf";
  desc   = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
  type   = par;
  vcc    = 2, 3, 4, 5;
  buff   = 6;
  reset  = 7;
  sck    = 8;
  mosi   = 9;
  miso   = 10;
  errled = 1;
  rdyled = 14;
  pgmled = 16;
  vfyled = 17;
;

programmer
  id    = "sp12";
  desc  = "Steve Bolt's Programmer";
  type  = par;
  vcc   = 4,5,6,7,8;
  reset = 3;
  sck   = 2;
  mosi  = 9;
  miso  = 11;
;

programmer
  id     = "picoweb";
  desc   = "Picoweb Programming Cable, http://www.picoweb.net/";
  type   = par;
  reset  = 2;
  sck    = 3;
  mosi   = 4;
  miso   = 13;
;

programmer
  id    = "abcmini";
  desc  = "ABCmini Board, aka Dick Smith HOTCHIP";
  type  = par;
  reset = 4;
  sck   = 3;
  mosi  = 2;
  miso  = 10;
;

programmer
  id    = "futurlec";
  desc  = "Futurlec.com programming cable.";
  type  = par;
  reset = 3;
  sck   = 2;
  mosi  = 1;
  miso  = 10;
;


# From the contributor of the "xil" jtag cable:
# The "vcc" definition isn't really vcc (the cable gets its power from
# the programming circuit) but is necessary to switch one of the
# buffer lines (trying to add it to the "buff" lines doesn't work).
# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK
# to SCK (plus vcc/gnd of course)
programmer
  id    = "xil";
  desc  = "Xilinx JTAG cable";
  type  = par;
  mosi  = 2;
  sck   = 3;
  reset = 4;
  buff  = 5;
  miso  = 13;
  vcc   = 6;
;


programmer
  id = "dapa";
  desc = "Direct AVR Parallel Access cable";
  type = par;
  vcc   = 3;
  reset = 16;
  sck = 1;
  mosi = 2;
  miso = 11;
;

programmer
  id    = "atisp";
  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
  type  = par;
  reset = ~6;
  sck   = ~8;
  mosi  = ~7;
  miso  = ~10;
;

programmer
  id    = "ere-isp-avr";
  desc  = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
  type  = par;
  reset = ~4;
  sck   = 3;
  mosi  = 2;
  miso  = 10;
;

programmer
  id    = "blaster";
  desc  = "Altera ByteBlaster";
  type  = par;
  sck   = 2;
  miso  = 11;
  reset = 3;
  mosi  = 8;
  buff  = 14;
;

# It is almost same as pony-stk200, except vcc on pin 5 to auto
# disconnect port (download on http://electropol.free.fr)
programmer
  id    = "frank-stk200";
  desc  = "Frank STK200";
  type  = par;
  vcc   = 5;
  sck   = 6;
  mosi  = 7;
  reset = 9;
  miso  = 10;
  pgmled = 8;
;


#
# some ultra cheap programmers use bitbanging on the 
# serialport.
#
# PC - DB9 - Pins for RS232:
#
# GND   5   -- |O
#              |   O| <-   9   RI
# DTR   4   <- |O   |
#              |   O| <-   8   CTS
# TXD   3   <- |O   |
#              |   O| ->   7   RTS
# RXD   2   -> |O   |
#              |   O| <-   6   DSR
# DCD   1   -> |O
#
# Using RXD is currently not supported.
# Using RI is not supported under Win32 but is supported under Posix.

# serial ponyprog design (dasa2 in uisp)
# reset=!txd sck=rts mosi=dtr miso=cts

programmer
  id    = "ponyser";
  desc  = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts";
  type  = serbb;
  reset = ~3;
  sck   = 7;
  mosi  = 4;
  miso  = 8;
;

# Same as above, different name
# reset=!txd sck=rts mosi=dtr miso=cts

programmer
  id    = "siprog";
  desc  = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
  type  = serbb;
  reset = ~3;
  sck   = 7;
  mosi  = 4;
  miso  = 8;
;

# unknown (dasa in uisp)
# reset=rts sck=dtr mosi=txd miso=cts

programmer
  id    = "dasa";
  desc  = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts";
  type  = serbb;
  reset = 7;
  sck   = 4;
  mosi  = 3;
  miso  = 8;
;

# unknown (dasa3 in uisp)
# reset=!dtr sck=rts mosi=txd miso=cts

programmer
  id    = "dasa3";
  desc  = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts";
  type  = serbb;
  reset = ~4;
  sck   = 7;
  mosi  = 3;
  miso  = 8;
;

# C2N232i (jumper configuration "auto")
# reset=dtr sck=!rts mosi=!txd miso=!cts

programmer
  id    = "c2n232i";
  desc  = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts";
  type  = serbb;
  reset = 4;
  sck   = ~7;
  mosi  = ~3;
  miso  = ~8;
;

#
# PART DEFINITIONS
#

#------------------------------------------------------------
# ATtiny11
#------------------------------------------------------------

# This is an HVSP-only device.

part
    id                  = "t11";
    desc                = "ATtiny11";
    stk500_devcode      = 0x11;
    signature           = 0x1e 0x90 0x04;
    chip_erase_delay    = 20000;

    timeout		= 200;
    hvsp_controlstack     =
        0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00,
        0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
        0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10,
        0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
    hventerstabdelay    = 100;
    progmodedelay       = 0;
    hvspcmdexedelay     = 0;
    synchcycles         = 6;
    latchcycles         = 1;
    togglevtg           = 1;
    poweroffdelay       = 25;