commanddefs.h

this is Si47xx Example Code

// This file contains the command definitions for the Si47xx Parts.
#ifndef _COMMAND_DEFS_H_
#define _COMMAND_DEFS_H_

//==================================================================
// General Commands
//==================================================================

// STATUS bits - Used by all methods
#define STCINT  0x01
#define ASQINT  0x02
#define RDSINT  0x04
#define RSQINT  0x08
#define ERR     0x40
#define CTS     0x80

// POWER_UP
#define POWER_UP                      0x01
#define POWER_UP_IN_FUNC_FMRX         0x00
#define POWER_UP_IN_FUNC_AMRX         0x01
#define POWER_UP_IN_FUNC_FMTX         0x02
#define POWER_UP_IN_FUNC_WBRX         0x03
#define POWER_UP_IN_FUNC_QUERY        0x0F
#define POWER_UP_IN_PATCH             0x20
#define POWER_UP_IN_GPO2OEN           0x40
#define POWER_UP_IN_CTSIEN            0x80
#define POWER_UP_IN_OPMODE_RX_ANALOG  0x05
#define POWER_UP_IN_OPMODE_TX_ANALOG  0x50

// GET_REV
#define GET_REV 0x10

// POWER_DOWN
#define POWER_DOWN 0x11

// SET_PROPERTY
#define SET_PROPERTY 0x12

// GET_PROPERTY
#define GET_PROPERTY 0x13

// GET_INT_STATUS
#define GET_INT_STATUS 0x14

//==================================================================
// FM Receive Commands
//==================================================================

// FM_TUNE_FREQ
#define FM_TUNE_FREQ 0x20

// FM_SEEK_START
#define FM_SEEK_START           0x21
#define FM_SEEK_START_IN_WRAP   0x04
#define FM_SEEK_START_IN_SEEKUP 0x08

// FM_TUNE_STATUS
#define FM_TUNE_STATUS           0x22
#define FM_TUNE_STATUS_IN_INTACK 0x01
#define FM_TUNE_STATUS_IN_CANCEL 0x02
#define FM_TUNE_STATUS_OUT_VALID 0x01
#define FM_TUNE_STATUS_OUT_AFCRL 0x02
#define FM_TUNE_STATUS_OUT_BTLF  0x80

// FM_RSQ_STATUS
#define FM_RSQ_STATUS              0x23
#define FM_RSQ_STATUS_IN_INTACK    0x01
#define FM_RSQ_STATUS_OUT_RSSILINT 0x01
#define FM_RSQ_STATUS_OUT_RSSIHINT 0x02
#define FM_RSQ_STATUS_OUT_ASNRLINT 0x04
#define FM_RSQ_STATUS_OUT_ASNRHINT 0x08
#define FM_RSQ_STATUS_OUT_BLENDINT 0x80
#define FM_RSQ_STATUS_OUT_VALID    0x01
#define FM_RSQ_STATUS_OUT_AFCRL    0x02
#define FM_RSQ_STATUS_OUT_SMUTE    0x08
#define FM_RSQ_STATUS_OUT_PILOT    0x80
#define FM_RSQ_STATUS_OUT_STBLEND  0x7F

// FM_RDS_STATUS
#define FM_RDS_STATUS               0x24
#define FM_RDS_STATUS_IN_INTACK     0x01
#define FM_RDS_STATUS_IN_MTFIFO     0x02
#define FM_RDS_STATUS_OUT_RECV      0x01
#define FM_RDS_STATUS_OUT_SYNCLOST  0x02
#define FM_RDS_STATUS_OUT_SYNCFOUND 0x04
#define FM_RDS_STATUS_OUT_SYNC      0x01
#define FM_RDS_STATUS_OUT_GRPLOST   0x04
#define FM_RDS_STATUS_OUT_BLED      0x03
#define FM_RDS_STATUS_OUT_BLEC      0x0C
#define FM_RDS_STATUS_OUT_BLEB      0x30
#define FM_RDS_STATUS_OUT_BLEA      0xC0
#define FM_RDS_STATUS_OUT_BLED_SHFT 0
#define FM_RDS_STATUS_OUT_BLEC_SHFT 2
#define FM_RDS_STATUS_OUT_BLEB_SHFT 4
#define FM_RDS_STATUS_OUT_BLEA_SHFT 6

//==================================================================
// AM Receive Commands
//==================================================================

// AM_TUNE_FREQ
#define AM_TUNE_FREQ 0x40

// AM_SEEK_START
#define AM_SEEK_START           0x41
#define AM_SEEK_START_IN_WRAP   0x04
#define AM_SEEK_START_IN_SEEKUP 0x08

// AM_TUNE_STATUS
#define AM_TUNE_STATUS           0x42
#define AM_TUNE_STATUS_IN_INTACK 0x01
#define AM_TUNE_STATUS_IN_CANCEL 0x02
#define AM_TUNE_STATUS_OUT_VALID 0x01
#define AM_TUNE_STATUS_OUT_AFCRL 0x02
#define AM_TUNE_STATUS_OUT_BTLF  0x80

// AM_RSQ_STATUS
#define AM_RSQ_STATUS              0x23
#define AM_RSQ_STATUS_IN_INTACK    0x01
#define AM_RSQ_STATUS_OUT_RSSILINT 0x01
#define AM_RSQ_STATUS_OUT_RSSIHINT 0x02
#define AM_RSQ_STATUS_OUT_ASNRLINT 0x04
#define AM_RSQ_STATUS_OUT_ASNRHINT 0x08
#define AM_RSQ_STATUS_OUT_VALID    0x01
#define AM_RSQ_STATUS_OUT_AFCRL    0x02
#define AM_RSQ_STATUS_OUT_SMUTE    0x08

//==================================================================
// FM Transmit Commands
//==================================================================

// TX_TUNE_FREQ
#define TX_TUNE_FREQ 0x30

// TX_TUNE_POWER
#define TX_TUNE_POWER 0x31

// TX_TUNE_MEASURE
#define TX_TUNE_MEASURE 0x32

// TX_TUNE_STATUS
#define TX_TUNE_STATUS           0x33
#define TX_TUNE_STATUS_IN_INTACK 0x01

// TX_ASQ_STATUS
#define TX_ASQ_STATUS             0x34
#define TX_ASQ_STATUS_IN_INTACK   0x01
#define TX_ASQ_STATUS_OUT_IALL    0x01
#define TX_ASQ_STATUS_OUT_IALH    0x02
#define TX_ASQ_STATUS_OUT_OVERMOD 0x04

// TX_RDS_BUFF
#define TX_RDS_BUFF           0x35
#define TX_RDS_BUFF_IN_INTACK 0x01
#define TX_RDS_BUFF_IN_MTBUFF 0x02
#define TX_RDS_BUFF_IN_LDBUFF 0x04
#define TX_RDS_BUFF_IN_FIFO   0x80

// TX_RDS_PS
#define TX_RDS_PS 0x36

//==================================================================
// WB Receive Commands
//==================================================================

// WB_TUNE_FREQ
#define WB_TUNE_FREQ 0x50

// WB_TUNE_STATUS
#define WB_TUNE_STATUS           0x52
#define WB_TUNE_STATUS_IN_INTACK 0x01
#define WB_TUNE_STATUS_OUT_VALID 0x01
#define WB_TUNE_STATUS_OUT_AFCRL 0x02

// WB_RSQ_STATUS
#define WB_RSQ_STATUS              0x53
#define WB_RSQ_STATUS_IN_INTACK    0x01
#define WB_RSQ_STATUS_OUT_RSSILINT 0x01
#define WB_RSQ_STATUS_OUT_RSSIHINT 0x02
#define WB_RSQ_STATUS_OUT_ASNRLINT 0x04
#define WB_RSQ_STATUS_OUT_ASNRHINT 0x08
#define WB_RSQ_STATUS_OUT_VALID    0x01
#define WB_RSQ_STATUS_OUT_AFCRL    0x02

// WB_ASQ_STATUS
#define WB_ASQ_STATUS					0x55
#define WB_ASQ_STATUS_IN_INTACK			0x01
#define WB_ASQ_STATUS_OUT_ALERTONINT	0x01
#define WB_ASQ_STATUS_OUT_ALERTOFFINT	0x02
#define WB_ASQ_STATUS_OUT_ALERT			0x01


#endif