app.c

这是在tinyos中用nesC语言编程示例

#line 227
typedef struct __nesc_unnamed4278 {
  uint8_t cmd_type;
  uint16_t duration;
} __attribute((packed))  LitPathCmd;
# 34 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\types\\Messages.h"
enum __nesc_unnamed4279 {
  AM_HEALTH = 3, 
  AM_DEBUGPACKET = 3, 
  AM_DATA2BASE = 11, 
  AM_DATA2NODE = 12, 
  AM_DATAACK2BASE = 13, 
  AM_DATAACK2NODE = 14, 
  AM_ANY2ANY = 15, 

  AM_TIMESYNC = 239, 
  AM_PREAMBLE = 240, 
  AM_DOWNSTREAM_ACK = 246, 
  AM_UPSTREAM_ACK = 247, 
  AM_PATH_LIGHT_DOWN = 248, 
  AM_PATH_LIGHT_UP = 249, 
  AM_MULTIHOPMSG = 250, 
  AM_ONE_HOP = 251, 
  AM_HEARTBEAT = 253, 

  AM_MGMT = 90, 
  AM_BULKXFER = 91, 
  AM_MGMTRESP = 92
};
# 23 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\types\\Health.h"
#line 18
typedef struct _health_node_quality {
  uint16_t node_id;
  uint8_t link_quality;
  uint8_t path_cost;
  uint8_t radio_link_indicator;
} __attribute((packed))  hn_quality;
#line 57
#line 48
typedef struct _health_hdr_ {





  uint8_t type_nodes;
  uint8_t version_num;
  uint8_t type;
} __attribute((packed))  HealthHdr;
#line 80
#line 63
typedef struct _health_msg_ {

  HealthHdr health_hdr;

  uint16_t seq_num;
  uint16_t num_node_pkts;
  uint16_t num_fwd_pkts;
  uint16_t num_drop_pkts;
  uint16_t num_rexmits;


  uint8_t battery_voltage;
  uint16_t power_sum;
  uint8_t rsvd_app_type;


  hn_quality nodeinfo[2];
} __attribute((packed))  HealthMsg;







#line 85
typedef struct _health_neighbor_ {
  HealthHdr health_hdr;
  hn_quality nodeinfo[3];
} __attribute((packed))  HealthNeighbor;
# 13 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ADC.h"
enum __nesc_unnamed4280 {
  TOS_ADCSample3750ns = 0, 
  TOS_ADCSample7500ns = 1, 
  TOS_ADCSample15us = 2, 
  TOS_ADCSample30us = 3, 
  TOS_ADCSample60us = 4, 
  TOS_ADCSample120us = 5, 
  TOS_ADCSample240us = 6, 
  TOS_ADCSample480us = 7
};
# 57 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Pot.nc"
static  result_t PotM$Pot$init(uint8_t arg_0x1a543bb0);
# 53 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\HPLPot.nc"
static  result_t HPLPotC$Pot$finalise(void);
#line 38
static  result_t HPLPotC$Pot$decrease(void);







static  result_t HPLPotC$Pot$increase(void);
# 32 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\HPLInit.nc"
static  result_t HPLInit$init(void);
# 53 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ReceiveMsg.nc"
static  TOS_MsgPtr AMPromiscuous$ReceiveMsg$default$receive(
# 36 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\AMPromiscuous.nc"
uint8_t arg_0x1a5e5e08, 
# 53 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ReceiveMsg.nc"
TOS_MsgPtr arg_0x1a5d4500);
# 51 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t AMPromiscuous$ActivityTimer$fired(void);
# 45 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\BareSendMsg.nc"
static  result_t AMPromiscuous$UARTSend$sendDone(TOS_MsgPtr arg_0x1a5f5a80, result_t arg_0x1a5f5c10);
# 53 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ReceiveMsg.nc"
static  TOS_MsgPtr AMPromiscuous$RadioReceive$receive(TOS_MsgPtr arg_0x1a5d4500);
# 49 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\CommControl.nc"
static  bool AMPromiscuous$CommControl$getPromiscuous(void);
#line 29
static  result_t AMPromiscuous$CommControl$setCRCCheck(bool arg_0x1a5a5dd8);




static  bool AMPromiscuous$CommControl$getCRCCheck(void);









static  result_t AMPromiscuous$CommControl$setPromiscuous(bool arg_0x1a5a3b18);
# 41 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t AMPromiscuous$Control$init(void);






static  result_t AMPromiscuous$Control$start(void);







static  result_t AMPromiscuous$Control$stop(void);
# 46 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\AMPromiscuous.nc"
static  result_t AMPromiscuous$default$sendDone(void);
# 45 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\BareSendMsg.nc"
static  result_t AMPromiscuous$RadioSend$sendDone(TOS_MsgPtr arg_0x1a5f5a80, result_t arg_0x1a5f5c10);
# 26 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\SendMsg.nc"
static  result_t AMPromiscuous$SendMsg$send(
# 35 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\AMPromiscuous.nc"
uint8_t arg_0x1a5e5770, 
# 26 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\SendMsg.nc"
uint16_t arg_0x1a5c0eb8, uint8_t arg_0x1a5b4068, TOS_MsgPtr arg_0x1a5b41f8);
# 53 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ReceiveMsg.nc"
static  TOS_MsgPtr AMPromiscuous$UARTReceive$receive(TOS_MsgPtr arg_0x1a5d4500);
# 42 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\SplitControl.nc"
static  result_t RF230ControlM$SplitControl$init(void);
#line 55
static  result_t RF230ControlM$SplitControl$start(void);
#line 71
static  result_t RF230ControlM$SplitControl$stop(void);
# 104 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\radio\\rf230\\RF230Control.nc"
static   void RF230ControlM$RF230Control$force_TRX_OFF(void);
#line 116
static   void RF230ControlM$RF230Control$set_RX_ON(void);
#line 74
static   void RF230ControlM$RF230Control$getRSSIandCRC(bool *arg_0x1a6a1e60, uint8_t *arg_0x1a6a0030);
#line 56
static   result_t RF230ControlM$RF230Control$SetRFPower(uint8_t arg_0x1a6a1168);
#line 98
static   void RF230ControlM$RF230Control$set_TRX_OFF(void);
#line 17
static   void RF230ControlM$RF230Control$resetRadio(void);
#line 110
static   void RF230ControlM$RF230Control$set_PLL_ON(void);
#line 29
static   result_t RF230ControlM$RF230Control$TunePreset(uint8_t arg_0x1a6a4ba8);
#line 90
static   bool RF230ControlM$RF230Control$CCA(void);
# 51 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t RF230ControlM$initTimer$fired(void);
# 29 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\radio\\rf230\\WakeSequence.nc"
static   void RF230RadioM$WakeSequence$sendWakeDone(result_t arg_0x1a7637f8);
#line 46
static   void RF230RadioM$WakeSequence$IncomingPacket(void);








static   void RF230RadioM$WakeSequence$sniffExpired(bool arg_0x1a762b90);
# 63 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\SplitControl.nc"
static  result_t RF230RadioM$RadioSplitControl$startDone(void);
# 45 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\BareSendMsg.nc"
static  result_t RF230RadioM$PHYSend$sendDone(TOS_MsgPtr arg_0x1a5f5a80, result_t arg_0x1a5f5c10);
#line 36
static  result_t RF230RadioM$Send$send(TOS_MsgPtr arg_0x1a5f5328);
# 51 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t RF230RadioM$SleepTimer$fired(void);
#line 51
static  result_t RF230RadioM$IntervalTimer$fired(void);
# 56 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\RadioPower.nc"
static  result_t RF230RadioM$RadioPower$SetListeningMode(uint8_t arg_0x1a694198);
static  result_t RF230RadioM$RadioPower$SetTransmitMode(uint8_t arg_0x1a694630);
# 53 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ReceiveMsg.nc"
static  TOS_MsgPtr RF230RadioM$PHYRecv$receive(TOS_MsgPtr arg_0x1a5d4500);
# 41 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t RF230RadioM$StdControl$init(void);






static  result_t RF230RadioM$StdControl$start(void);







static  result_t RF230RadioM$StdControl$stop(void);
# 24 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\radio\\rf230\\MacBackoff.nc"
static   int16_t RF230RadioM$MacBackoff$initialBackoff(TOS_MsgPtr arg_0x1a7767f8);
static   int16_t RF230RadioM$MacBackoff$congestionBackoff(TOS_MsgPtr arg_0x1a776cb8);
# 16 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\radio\\rf230\\RF230Interrupts.nc"
static  void  RF230RadioRawM$RF230Interrupts$INT_RX_Start(void);



static  void  RF230RadioRawM$RF230Interrupts$INT_TRX_UnderRun(void);
#line 18
static  void  RF230RadioRawM$RF230Interrupts$INT_TRX_Done(void);
# 42 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\SplitControl.nc"
static  result_t RF230RadioRawM$RadioSplitControl$init(void);
#line 55
static  result_t RF230RadioRawM$RadioSplitControl$start(void);
#line 71
static  result_t RF230RadioRawM$RadioSplitControl$stop(void);
# 15 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\RadioCoordinator.nc"
static   void RF230RadioRawM$sendCoordinator$default$startSymbol(uint8_t arg_0x1a7b1988, uint8_t arg_0x1a7b1b10, TOS_MsgPtr arg_0x1a7b1ca0);
# 22 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\TimerJiffyAsync.nc"
static   result_t RF230RadioRawM$TimerJiffyAsync$fired(void);
# 15 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\RadioCoordinator.nc"
static   void RF230RadioRawM$recvCoordinator$default$startSymbol(uint8_t arg_0x1a7b1988, uint8_t arg_0x1a7b1b10, TOS_MsgPtr arg_0x1a7b1ca0);
# 36 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\BareSendMsg.nc"
static  result_t RF230RadioRawM$Send$send(TOS_MsgPtr arg_0x1a5f5328);
# 63 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\SplitControl.nc"
static  result_t RF230RadioRawM$RF230ControlSplitControl$startDone(void);
# 14 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\radio\\rf230\\RF230Interrupts.nc"
static   void RF230InterruptsM$RF230Interrupts$disable(void);
#line 12
static   void RF230InterruptsM$RF230Interrupts$enable(void);
# 41 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t RF230InterruptsM$InterruptControl$init(void);






static  result_t RF230InterruptsM$InterruptControl$start(void);







static  result_t RF230InterruptsM$InterruptControl$stop(void);
# 60 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\TimerCapture.nc"
static   void RF230InterruptsM$TimerCapture$captured(uint16_t arg_0x1a8a2648);
# 157 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\Clock16.nc"
static   result_t HPLTimer1M$Timer1$default$fire(void);
# 19 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\TimerCapture.nc"
static   uint16_t HPLTimer1M$CaptureT1$getEvent(void);
#line 50
static   void HPLTimer1M$CaptureT1$enableEvents(void);
static   void HPLTimer1M$CaptureT1$disableEvents(void);
#line 28
static   void HPLTimer1M$CaptureT1$setEdge(uint8_t arg_0x1a8a4010);
# 34 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\radio\\rf230\\HPLRF230.nc"
static   void HPLRF230M$HPLRF230$writeFrame(uint8_t arg_0x1a6e10f8, uint8_t *arg_0x1a6e12a0);
#line 46
static   uint8_t HPLRF230M$HPLRF230$readFrameCRC(uint8_t *arg_0x1a6e0068);
#line 14
static   void HPLRF230M$HPLRF230$writeReg(uint8_t arg_0x1a6e5bb0, uint8_t arg_0x1a6e5d38);
#line 29
static   void HPLRF230M$HPLRF230$bitWrite(uint8_t arg_0x1a6e25c0, uint8_t arg_0x1a6e2748, uint8_t arg_0x1a6e28d0, uint8_t arg_0x1a6e2a58);










static   void HPLRF230M$HPLRF230$addCRC(uint8_t *arg_0x1a6e1938);
#line 19
static   uint8_t HPLRF230M$HPLRF230$readReg(uint8_t arg_0x1a6e33d8);
# 14 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\radio\\rf230\\HPLRF230Init.nc"
static   void HPLRF230M$HPLRF230Init$init(void);
# 159 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Clock.nc"
static   result_t TimerM$Clock$fire(void);
# 41 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t TimerM$StdControl$init(void);






static  result_t TimerM$StdControl$start(void);
# 51 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t TimerM$Timer$default$fired(
# 26 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\TimerM.nc"
uint8_t arg_0x1a9e23a0);
# 37 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
static  result_t TimerM$Timer$start(
# 26 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\TimerM.nc"
uint8_t arg_0x1a9e23a0, 
# 37 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Timer.nc"
char arg_0x1a6121f0, uint32_t arg_0x1a612388);








static  result_t TimerM$Timer$stop(
# 26 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\system\\TimerM.nc"
uint8_t arg_0x1a9e23a0);
# 84 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Clock.nc"
static   void HPLClock$Clock$setInterval(uint8_t arg_0x1a9f6da8);
#line 127
static   result_t HPLClock$Clock$setIntervalAndScale(uint8_t arg_0x1a9f4d00, uint8_t arg_0x1a9f4e88);




static   uint8_t HPLClock$Clock$readCounter(void);
#line 75
static   result_t HPLClock$Clock$setRate(char arg_0x1a9f6010, char arg_0x1a9f6190);
#line 100
static   uint8_t HPLClock$Clock$getInterval(void);
# 85 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Leds.nc"
static   result_t NoLeds$Leds$greenToggle(void);
#line 60
static   result_t NoLeds$Leds$redToggle(void);
# 19 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\PowerManagement.nc"
static   uint8_t HPLPowerManagementM$PowerManagement$adjustPower(void);
# 16 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\platform\\atm1281\\TimerJiffyAsync.nc"
static   result_t TimerJiffyAsyncM$TimerJiffyAsync$setOneShot(uint32_t arg_0x1a7d55f0);

static   result_t TimerJiffyAsyncM$TimerJiffyAsync$stop(void);
# 159 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Clock.nc"
static   result_t TimerJiffyAsyncM$Timer$fire(void);
#line 127
static   result_t HPLTimer0$Timer0$setIntervalAndScale(uint8_t arg_0x1a9f4d00, uint8_t arg_0x1a9f4e88);
#line 147
static   void HPLTimer0$Timer0$intDisable(void);
# 101 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Leds.nc"
static   result_t LedsC$Leds$yellowOff(void);
#line 93
static   result_t LedsC$Leds$yellowOn(void);
#line 35
static   result_t LedsC$Leds$init(void);
#line 76
static   result_t LedsC$Leds$greenOff(void);
#line 51
static   result_t LedsC$Leds$redOff(void);
#line 85
static   result_t LedsC$Leds$greenToggle(void);
#line 110
static   result_t LedsC$Leds$yellowToggle(void);
#line 60
static   result_t LedsC$Leds$redToggle(void);
#line 43
static   result_t LedsC$Leds$redOn(void);
#line 68
static   result_t LedsC$Leds$greenOn(void);
# 42 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\Random.nc"
static   uint16_t RandomLFSR$Random$rand(void);
#line 36
static   result_t RandomLFSR$Random$init(void);
# 62 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ByteComm.nc"
static   result_t FramerM$ByteComm$txDone(void);
#line 54
static   result_t FramerM$ByteComm$txByteReady(bool arg_0x1ab342e8);
#line 45
static   result_t FramerM$ByteComm$rxByteReady(uint8_t arg_0x1ab357f0, bool arg_0x1ab35978, uint16_t arg_0x1ab35b10);
# 36 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\BareSendMsg.nc"
static  result_t FramerM$BareSendMsg$send(TOS_MsgPtr arg_0x1a5f5328);
# 41 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t FramerM$StdControl$init(void);






static  result_t FramerM$StdControl$start(void);







static  result_t FramerM$StdControl$stop(void);
# 59 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\TokenReceiveMsg.nc"
static  result_t FramerM$TokenReceiveMsg$ReflectToken(uint8_t arg_0x1ab3ab90);
# 53 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ReceiveMsg.nc"
static  TOS_MsgPtr FramerAckM$ReceiveMsg$receive(TOS_MsgPtr arg_0x1a5d4500);
# 46 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\TokenReceiveMsg.nc"
static  TOS_MsgPtr FramerAckM$TokenReceiveMsg$receive(TOS_MsgPtr arg_0x1ab3a190, uint8_t arg_0x1ab3a318);
# 66 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\HPLUART.nc"
static   result_t UARTM$HPLUART$get(uint8_t arg_0x1abb0068);







static   result_t UARTM$HPLUART$putDone(void);
# 34 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\ByteComm.nc"
static   result_t UARTM$ByteComm$txByte(uint8_t arg_0x1ab350f8);
# 41 "D:\\Crossbow\\cygwin\\opt\\MoteWorks\\tos\\interfaces\\StdControl.nc"
static  result_t UARTM$Control$init(void);






static  result_t UARTM$Control$start(void);