湿温度_opt.bak

湿度采集模块

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,335544320,0,0,0,0,<.\250451.c><250451.c> 
OPTFFF 1,2,1,301989890,0,180,181,0,<.\wsd1.c><wsd1.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,22,0,0,0,22,0,0,0,28,2,0,0,214,0,0,0 }
OPTFFF 1,3,4,0,0,0,0,0,<C:\Keil\C51\LIB\C51s.LIB><C51s.LIB> 

ExtF <..\完成的原程序\温湿度集成传感器\温湿度集成传感器.asm> 65,65,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,66,0,0,0,66,0,0,0,54,2,0,0,7,1,0,0 }
ExtF <..\温度\10点温度\10点.c> 225,228,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,66,0,0,0,66,0,0,0,54,2,0,0,7,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 1,(Data Sheet)<DATASHTS\ATMEL\AT89C52_DS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\AT_C51ISM.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 109566,-1,()()()()()()()()()() (BIN\MON51.DLL)()()()
  OPTKEY 0,(DLGTP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(99=150,109,353,374,0)(91=4,182,204,425,0)(92=522,357,722,600,0)(93=292,231,517,433,0))
  OPTKEY 0,(MON51)(-S1 -B115200 -O15)
  OPTDF 0x86
  OPTLE <>
  OPTLC <>
EndOpt