case1.psc

image threshoolding color image

    Display = "0"
    Max = "1.0"
    Min = "0.0"
    Value = "0.15"
    Units = "s"
    Collect = "1"
    }
   0.const([54,900],0,0,90)
    {
    Name = ""
    Value = "10.0"
    }
   0.const([90,1044],1,0,160)
    {
    Name = ""
    Value = "10.0"
    }
   0.var_switch([126,1008],1,23287192,130)
    {
    Name = "en Record2"
    Group = ""
    Display = "0"
    Value = "1"
    Max = "1"
    Min = "0"
    Ton = "ON"
    Toff = "OFF"
    }
   0.var_switch([126,828],1,23289088,80)
    {
    Name = "en Record1"
    Group = ""
    Display = "0"
    Value = "1"
    Max = "1"
    Min = "0"
    Ton = "ON"
    Toff = "OFF"
    }
   0.datalabel([1386,648],2,0,-1)
    {
    Name = "FType"
    }
   -Wire-([1386,630],0,0,-1)
    {
    Vertex="0,0;72,0"
    }
   -Wire-([1458,648],0,0,-1)
    {
    Vertex="0,0;-72,0"
    }
   -Wire-([1458,684],0,0,-1)
    {
    Vertex="0,0;-72,0"
    }
   -TLine-([558,396],0,21451096,-1)
    {
    Name = "LINE1"
    Date = 1144440270
    Freq = "$(f)"
    Length = "100.0 [km]"
    Dim = 3
    Mode = 1
    Vertex="0,0;18,0;198,0;216,0"
    PageLayer(A/A4,Landscape,16,[597,467],100)
     {
     0.Line_FrePhase_Options([216,468],0,21500032,-1)
      {
      Interp1 = "1"
      Output = "0"
      Inflen = "0"
      FS = "0.5 [Hz]"
      FE = "1.0E6 [Hz]"
      Numf = "100"
      YMaxP = "20"
      AMaxP = "20"
      YMaxE = "2 [%]"
      AMaxE = "2 [%]"
      xxx = ""
      W1 = "100"
      W2 = "1000"
      W3 = "1"
      }
     0.Line_Tower_3_Delta([702,612],0,20996032,-1)
      {
      TName = "3H5"
      Y = "30 [m]"
      Y2 = "5 [m]"
      XC = "10 [m]"
      X = "0 [m]"
      ShuntG = "1.0E-10 [mho/m]"
      SHSag = "0"
      Transp = "1"
      NG = "2"
      ElimGW = "1"
      CDataType = "1"
      CName = "chukar"
      CLName = "..\\conductor.clb"
      RadiusC = "0.0203454 [m]"
      DCResC = "0.03206 [ohm/km]"
      SAGC = "10 [m]"
      NCondB = "1"
      BundSym = "0"
      SHBund = "1"
      BSP = ".4572 [m]"
      GDataType = "1"
      GName = "1/2\"HighStrengthSteel"
      GLName = "..\\conductor.clb"
      RadiusG = "0.0055245 [m]"
      DCResG = "2.8645 [ohm/km]"
      SAGG = "10 [m]"
      YG = "10 [m]"
      XG = "10 [m]"
      XB1 = "-0.1 [m]"
      YB1 = "0.1 [m]"
      XB2 = "-0.1 [m]"
      YB2 = "0.1 [m]"
      XB3 = "-0.1 [m]"
      YB3 = "0.1 [m]"
      XB4 = "-0.1 [m]"
      YB4 = "0.1 [m]"
      XB5 = "-0.1 [m]"
      YB5 = "0.1 [m]"
      XB6 = "-0.1 [m]"
      YB6 = "0.1 [m]"
      XB7 = "-0.1 [m]"
      YB7 = "0.1 [m]"
      XB8 = "-0.1 [m]"
      YB8 = "0.1 [m]"
      XB9 = "-0.1 [m]"
      YB9 = "0.1 [m]"
      XB10 = "-0.1 [m]"
      YB10 = "0.1 [m]"
      NC1 = "1"
      NC2 = "2"
      NC3 = "3"
      NG1 = "4"
      NG2 = "5"
      }
     0.Line_Ground([630,702],0,20997792,-1)
      {
      GRRES = "100.0 [ohm*m]"
      GPERM = "1.0"
      EarthForm = "0"
      }
     0.SequenceInfo([522,198],0,21066696,-1)
      {
      Mode = "0"
      X1 = "3.57448095"
      Y1 = "50.7762676"
      X2 = "3.57448095"
      Y2 = "50.7762676"
      X3 = "36.3152201"
      Y3 = "132.647323"
      X4 = "1.0e-005"
      Y4 = "0.000327117946"
      X5 = "0.0"
      Y5 = "0.0"
      X6 = "1.0e-005"
      Y6 = "0.000232266098"
      M1 = "50.9019279149"
      P1 = "85.9732100966"
      M2 = "50.9019279149"
      P2 = "85.9732100966"
      M3 = "137.528569795"
      P3 = "74.6891426178"
      M4 = "0.000327270760373"
      P4 = "88.249012563"
      M5 = "0.0"
      P5 = "0.0"
      M6 = "0.000232481268665"
      P6 = "87.5347062197"
      }
     }
    }
   -Wire-([522,396],0,0,-1)
    {
    Vertex="0,0;36,0"
    }
   -Wire-([810,396],0,0,-1)
    {
    Vertex="0,0;-36,0"
    }
   -Sticky-([1152,396],0)
    {
    Name = ""
    Font = 1
    Bounds = 1152,396,1242,432
    Alignment = 0
    Style = 1
    Arrow = 0
    Color = 0,15792890
    Text = "SUBSTATION 2"
    }
   0.source3R([1062,396],2,0,340)
    {
    Name = "Source2"
    MVA = "100.0 [MVA]"
    Vm = "230.0 [kV]"
    F = "$(f)"
    Tc = "0.05 [s]"
    Ideal = "0"
    ZSeq = "1"
    Imp = "1"
    View = "1"
    details = "1"
    Z1 = "52.9 [ohm]"
    Phi1 = "80.0 [deg]"
    R1p = "1.0 [ohm]"
    X1p = "0.1 [ohm]"
    Z0 = "52.9 [ohm]"
    Phi0 = "80.0 [deg]"
    R0p = "1.0 [ohm]"
    X0p = "0.1 [ohm]"
    P = "S2W"
    Q = "S2Q"
    Ia = ""
    Ib = ""
    Ic = ""
    }
   .Plots([1494,540],0,0,70)
    {
    }
   -Sticky-([36,36],0)
    {
    Name = ""
    Font = 1
    Bounds = 36,36,558,198
    Alignment = 0
    Style = 0
    Arrow = 0
    Color = 0,15792890
    Text = "\
Case 1: 
- Two Thevinen Impedance sources connected via one 100km transmission line.
- System voltage is 230kV settable via source equivalents.
- Simulates two substations connected via one transmission line.
- Four fault positions for full fault control ahead and behind station relays.
- Two breakers are independently timed controlled. (Default is closed).
- Independent breaker pole tripping is possible."
    }
   .Controls([1494,666],4,0,370)
    {
    }
   0.recorder2_0([504,900],0,0,730)
    {
    FName = "stn1"
    FFMT = "2"
    Rstep = "50"
    Mfilter = "0"
    FREQ = "1"
    StnN = "EMTDC_Simulation"
    DevNo = "1"
    NChA = "6"
    NChD = "1"
    ABFMT = "0"
    MFILE = "0"
    NxHdr = "0"
    AMin = "0"
    AMax = "4096"
    ENTCAP = "0"
    Hdr1 = "Extra_Line_1"
    Hdr2 = "Extra_Line_2"
    Hdr3 = "Extra_Line_3"
    Hdr4 = "Extra_Line_4"
    Hdr5 = "Extra_Line_5"
    NA1 = "V1a"
    DA1 = "A1"
    VS1 = "0"
    VT1 = "0"
    UN1 = "A1"
    PH1 = "0"
    TR1 = "2"
    CT1 = "A1"
    NA2 = "V1b"
    DA2 = "A2"
    VS2 = "0"
    VT2 = "0"
    UN2 = "A2"
    PH2 = "0"
    TR2 = "2"
    CT2 = "A2"
    NA3 = "V1c"
    DA3 = "A3"
    VS3 = "0"
    VT3 = "0"
    UN3 = "A3"
    PH3 = "0"
    TR3 = "2"
    CT3 = "A3"
    NA4 = "I1a"
    DA4 = "A4"
    VS4 = "0"
    VT4 = "1"
    UN4 = "A4"
    PH4 = "0"
    TR4 = "0.4"
    CT4 = "A4"
    NA5 = "I1b"
    DA5 = "A5"
    VS5 = "0"
    VT5 = "1"
    UN5 = "A5"
    PH5 = "0"
    TR5 = "0.4"
    CT5 = "A5"
    NA6 = "I1c"
    DA6 = "A6"
    VS6 = "0"
    VT6 = "1"
    UN6 = "A6"
    PH6 = "0"
    TR6 = "0.4"
    CT6 = "A6"
    NA7 = "A7"
    DA7 = "A7"
    VS7 = "0"
    VT7 = "0"
    UN7 = "A7"
    PH7 = "0"
    TR7 = "1"
    CT7 = "A7"
    NA8 = "A8"
    DA8 = "A8"
    VS8 = "0"
    VT8 = "0"
    UN8 = "A8"
    PH8 = "0"
    TR8 = "1"
    CT8 = "A8"
    NA9 = "A9"
    DA9 = "A9"
    VS9 = "0"
    VT9 = "0"
    UN9 = "A9"
    PH9 = "0"
    TR9 = "1"
    CT9 = "A9"
    NA10 = "A10"
    DA10 = "A10"
    VS10 = "0"
    VT10 = "0"
    UN10 = "A10"
    PH10 = "0"
    TR10 = "1"
    CT10 = "A10"
    NA11 = "A11"
    DA11 = "A11"
    VS11 = "0"
    VT11 = "0"
    UN11 = "A11"
    PH11 = "0"
    TR11 = "1"
    CT11 = "A11"
    NA12 = "A12"
    DA12 = "A12"
    VS12 = "0"
    VT12 = "0"
    UN12 = "A12"
    PH12 = "0"
    TR12 = "1.0"
    CT12 = "A12"
    ND1 = "D1"
    DD1 = "D1"
    NT1 = "0"
    ND2 = "D2"
    DD2 = "D2"
    NT2 = "0"
    ND3 = "D3"
    DD3 = "D3"
    NT3 = "0"
    ND4 = "D4"
    DD4 = "D4"
    NT4 = "0"
    ND5 = "D5"
    DD5 = "D5"
    NT5 = "0"
    ND6 = "D6"
    DD6 = "D6"
    NT6 = "0"
    ND7 = "D7"
    DD7 = "D7"
    NT7 = "0"
    ND8 = "D8"
    DD8 = "D8"
    NT8 = "0"
    ND9 = "D9"
    DD9 = "D9"
    NT9 = "0"
    ND10 = "D10"
    DD10 = "D10"
    NT10 = "0"
    ND11 = "D11"
    DD11 = "D11"
    NT11 = "0"
    ND12 = "D12"
    DD12 = "D12"
    NT12 = "0"
    ND13 = "D13"
    DD13 = "D13"
    NT13 = "0"
    ND14 = "D14"
    DD14 = "D14"
    NT14 = "0"
    ND15 = "D15"
    DD15 = "D15"
    NT15 = "0"
    ND16 = "D16"
    DD16 = "D16"
    NT16 = "0"
    }
   0.recorder2_0([504,1080],0,0,660)
    {
    FName = "stn2"
    FFMT = "2"
    Rstep = "50"
    Mfilter = "0"
    FREQ = "1"
    StnN = "EMTDC_Simulation"
    DevNo = "2"
    NChA = "6"
    NChD = "1"
    ABFMT = "0"
    MFILE = "0"
    NxHdr = "0"
    AMin = "0"
    AMax = "4096"
    ENTCAP = "0"
    Hdr1 = "Extra_Line_1"
    Hdr2 = "Extra_Line_2"
    Hdr3 = "Extra_Line_3"
    Hdr4 = "Extra_Line_4"
    Hdr5 = "Extra_Line_5"
    NA1 = "V2a"
    DA1 = "A1"
    VS1 = "0"
    VT1 = "0"
    UN1 = "A1"
    PH1 = "0"
    TR1 = "2"
    CT1 = "A1"
    NA2 = "V2b"
    DA2 = "A2"
    VS2 = "0"
    VT2 = "0"
    UN2 = "A2"
    PH2 = "0"
    TR2 = "2"
    CT2 = "A2"
    NA3 = "V2c"
    DA3 = "A3"
    VS3 = "0"
    VT3 = "0"
    UN3 = "A3"
    PH3 = "0"
    TR3 = "2"
    CT3 = "A3"
    NA4 = "I2a"
    DA4 = "A4"
    VS4 = "0"
    VT4 = "1"
    UN4 = "A4"
    PH4 = "0"
    TR4 = ".4"
    CT4 = "A4"
    NA5 = "I2b"
    DA5 = "A5"
    VS5 = "0"
    VT5 = "1"
    UN5 = "A5"
    PH5 = "0"
    TR5 = ".4"
    CT5 = "A5"
    NA6 = "I2c"
    DA6 = "A6"
    VS6 = "0"
    VT6 = "1"
    UN6 = "A6"
    PH6 = "0"
    TR6 = ".4"
    CT6 = "A6"
    NA7 = "A7"
    DA7 = "A7"
    VS7 = "0"
    VT7 = "0"
    UN7 = "A7"
    PH7 = "0"
    TR7 = "1"
    CT7 = "A7"
    NA8 = "A8"
    DA8 = "A8"
    VS8 = "0"
    VT8 = "0"
    UN8 = "A8"
    PH8 = "0"
    TR8 = "1"
    CT8 = "A8"
    NA9 = "A9"
    DA9 = "A9"
    VS9 = "0"
    VT9 = "0"
    UN9 = "A9"
    PH9 = "0"
    TR9 = "1"
    CT9 = "A9"
    NA10 = "A10"
    DA10 = "A10"
    VS10 = "0"
    VT10 = "0"
    UN10 = "A10"
    PH10 = "0"
    TR10 = "1"
    CT10 = "A10"
    NA11 = "A11"
    DA11 = "A11"
    VS11 = "0"
    VT11 = "0"
    UN11 = "A11"
    PH11 = "0"
    TR11 = "1"
    CT11 = "A11"
    NA12 = "A12"
    DA12 = "A12"
    VS12 = "0"
    VT12 = "0"
    UN12 = "A12"
    PH12 = "0"
    TR12 = "1.0"
    CT12 = "A12"
    ND1 = "D1"
    DD1 = "D1"
    NT1 = "0"
    ND2 = "D2"
    DD2 = "D2"
    NT2 = "0"
    ND3 = "D3"
    DD3 = "D3"
    NT3 = "0"
    ND4 = "D4"
    DD4 = "D4"
    NT4 = "0"
    ND5 = "D5"
    DD5 = "D5"
    NT5 = "0"
    ND6 = "D6"
    DD6 = "D6"
    NT6 = "0"
    ND7 = "D7"
    DD7 = "D7"
    NT7 = "0"
    ND8 = "D8"
    DD8 = "D8"
    NT8 = "0"
    ND9 = "D9"
    DD9 = "D9"
    NT9 = "0"
    ND10 = "D10"
    DD10 = "D10"
    NT10 = "0"
    ND11 = "D11"
    DD11 = "D11"
    NT11 = "0"
    ND12 = "D12"
    DD12 = "D12"
    NT12 = "0"
    ND13 = "D13"
    DD13 = "D13"
    NT13 = "0"
    ND14 = "D14"
    DD14 = "D14"
    NT14 = "0"
    ND15 = "D15"
    DD15 = "D15"
    NT15 = "0"
    ND16 = "D16"
    DD16 = "D16"
    NT16 = "0"
    }
   -Sticky-([702,54],0)
    {
    Name = ""
    Font = 1
    Bounds = 702,54,1098,162
    Alignment = 0
    Style = 0
    Arrow = 0
    Color = 0,15792890
    Text = "\
This case uses global substitutions.  To change between 50Hz/60Hz. right-click on your project name in the project tree.  From the pop-up window select Global Constants.  In this window, change the value of f to the desired frequency. Also make sure that you select the appropriate system frequency in RTP/COMTRADE recorders.
"
    }
   -Divider-([18,756],0)
    {
    Size(1530,0)
    3D = 1
    Color = 9
    Style = 0
    Weight = 2
    }
   0.multimeter([504,396],0,0,10)
    {
    MeasI = "0"
    MeasV = "1"
    MeasP = "0"
    MeasQ = "0"
    RMS = "1"
    MeasPh = "0"
    S = "1.0 [MVA]"
    BaseV = "1.0 [kV]"
    TS = "0.02 [s]"
    Freq = "60.0 [Hz]"
    Dis = "0"
    CurI = ""
    VolI = "V1"
    P = ""
    Q = ""
    Vrms = "V1rms"
    Ph = ""
    hide1 = "0"
    hide2 = "0"
    Pd = ""
    Qd = ""
    Vd = ""
    }
   0.multimeter([828,396],4,0,20)
    {
    MeasI = "0"
    MeasV = "1"
    MeasP = "0"
    MeasQ = "0"
    RMS = "1"
    MeasPh = "0"
    S = "1.0 [MVA]"
    BaseV = "1.0 [kV]"
    TS = "0.02 [s]"
    Freq = "60.0 [Hz]"
    Dis = "0"
    CurI = ""
    VolI = "V2"
    P = ""
    Q = ""
    Vrms = "V2rms"
    Ph = ""
    hide1 = "0"
    hide2 = "0"
    Pd = ""
    Qd = ""
    Vd = ""
    }
   -Wire-([1260,864],0,0,-1)
    {
    Vertex="0,0;54,0"
    }
   0.datalabel([1260,864],2,0,-1)
    {
    Name = "V1rms"
    }
   -Wire-([1260,900],0,0,-1)
    {
    Vertex="0,0;54,0"
    }
   0.datalabel([1260,900],2,0,-1)
    {
    Name = "V2rms"
    }
   }
  }
 }