📄 ad.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (3.3V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED : Unused I/O pin, which MUST be left unconnected.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 4.2 Build 157 12/07/2004 SJ Full Version
CHIP "AD" ASSIGNED TO AN: EPM7256AEQC208-10
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
NC : 1 : : : : :
NC : 2 : : : : :
DI43 : 3 : input : LVTTL : : : Y
DI42 : 4 : input : LVTTL : : : Y
VCCIO : 5 : power : : 3.3V : :
DI41 : 6 : input : LVTTL : : : Y
DI40 : 7 : input : LVTTL : : : Y
DI39 : 8 : input : LVTTL : : : Y
DI38 : 9 : input : LVTTL : : : Y
DI37 : 10 : input : LVTTL : : : Y
DI36 : 11 : input : LVTTL : : : Y
DI35 : 12 : input : LVTTL : : : Y
DI34 : 13 : input : LVTTL : : : Y
GND : 14 : gnd : : : :
DI33 : 15 : input : LVTTL : : : Y
DI32 : 16 : input : LVTTL : : : Y
DI31 : 17 : input : LVTTL : : : Y
DI25 : 18 : input : LVTTL : : : Y
DI24 : 19 : input : LVTTL : : : Y
DI23 : 20 : input : LVTTL : : : Y
DI22 : 21 : input : LVTTL : : : Y
DI21 : 22 : input : LVTTL : : : Y
VCCIO : 23 : power : : 3.3V : :
DI20 : 24 : input : LVTTL : : : Y
DI19 : 25 : input : LVTTL : : : Y
DI18 : 26 : input : LVTTL : : : Y
DI17 : 27 : input : LVTTL : : : Y
DI16 : 28 : input : LVTTL : : : Y
DI15 : 29 : input : LVTTL : : : Y
TCK : 30 : input : LVTTL : : : N
DI13 : 31 : input : LVTTL : : : Y
GND : 32 : gnd : : : :
DI12 : 33 : input : LVTTL : : : Y
DI11 : 34 : input : LVTTL : : : Y
DI10 : 35 : input : LVTTL : : : Y
DI9 : 36 : input : LVTTL : : : Y
DI8 : 37 : input : LVTTL : : : Y
DI7 : 38 : input : LVTTL : : : Y
DI6 : 39 : input : LVTTL : : : Y
DI5 : 40 : input : LVTTL : : : Y
VCCIO : 41 : power : : 3.3V : :
DI4 : 42 : input : LVTTL : : : Y
DI3 : 43 : input : LVTTL : : : Y
DI2 : 44 : input : LVTTL : : : Y
DI1 : 45 : input : LVTTL : : : Y
DI0 : 46 : input : LVTTL : : : Y
FM_WE : 47 : output : LVTTL : : : Y
FM_CE : 48 : output : LVTTL : : : Y
FM_OE : 49 : output : LVTTL : : : Y
GND : 50 : gnd : : : :
NC : 51 : : : : :
NC : 52 : : : : :
NC : 53 : : : : :
NC : 54 : : : : :
RESERVED_INPUT : 55 : : : : :
RESERVED_INPUT : 56 : : : : :
RESERVED_INPUT : 57 : : : : :
RESERVED_INPUT : 58 : : : : :
A15 : 59 : input : LVTTL : : : Y
RESERVED_INPUT : 60 : : : : :
RESERVED_INPUT : 61 : : : : :
A2 : 62 : input : LVTTL : : : Y
VCCIO : 63 : power : : 3.3V : :
A1 : 64 : input : LVTTL : : : Y
A0 : 65 : input : LVTTL : : : Y
A3 : 66 : input : LVTTL : : : Y
A4 : 67 : input : LVTTL : : : Y
A5 : 68 : input : LVTTL : : : Y
RESERVED_INPUT : 69 : : : : :
RESERVED_INPUT : 70 : : : : :
D7 : 71 : bidir : LVTTL : : : Y
GND : 72 : gnd : : : :
D6 : 73 : bidir : LVTTL : : : Y
VCCINT : 74 : power : : 3.3V : :
GND : 75 : gnd : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -