errorcodepack.properties

station pcstation pcstation pcstation pcstation pcstation pc

#
#  Packing PC error definition file
#  Version 2.00	2007/06/19

#--------------------------------------------------------------
Font size information (For error message dialog)
FONT=14
LENGTH=40
#--------------------------------------------------------------
<PP00001>=Initial file not found. Name:
<PP00002>=I/O Error detected reading initial file.
<PP00003>=Format error of initial file.
<PP00004>=Indispensable item is not found in the initial file.
<PP00005>=Barcode Reader Error.
<PP00101>=PNCHK failed.
<PP00102>=RMI Communication Error for PNCHK initialization
<PP00103>=RMI Communication Error for PNCHK
<PP00110>=[WCS Error] BOXPAK failed.
<PP00111>=[Warning] This Box is halfway.
<PP00112>=[WCS Error] BOXUPD failed.
<PP00113>=[WCS Error] SERCHK failed.
<PP00114>=[WCS Error] This Box has already been completed.
<PP00121>=RMI Communication Error for ShpChk initialization
<PP00122>=RMI Communication Error for ShpChk
<PP00123>=The violation of MFGID Mix
<PP00124>=The violation of MicroCode Mix
<PP00125>=ShpChk failed.
<PP00131>=User Serial is not valid. 
<PP00150>=NETBIOS Error
<PP00201>=Serial Duplicate for 
<PP00900>=Format Error of returned data from WCS
<PP01003>=Can not write log file. Check File System.


<SS0000N>=ShipCheck Pass
<SS0001N>=Cannot find the S/N. This S/N might not be tested at all test process.
<SS0002N>=This ProcID is not defined in ProcTbl
<SS0003N>=This procID is not a ShipCheck Process.
<SS0004N>=This ProcID has an incorrect PacketNo in ProcTbl.
<SS0005N>=This ProcID's ShpChkItem has incorect combination.
<SS0010N>=MfgID is different from ID in SerialTbl
<SS0020N>=This S/N is not allowed to be shipped
<SS0030N>=This TrialID is not allowed to be shipped
<SS0040N>=For this P/N, Test Process isn't defined.
<SS0041N>=Cannot find the data for the following Test ProcessID.
<SS0042N>=This S/N was failed in the following Test ProcessID.
<SS0043N>=Double STW
<SS0044N>=Double PASS
<SS0045N>=This S/N has an incorrect Test Comp Date.
<SS0046N>=This S/N has no Test Code Version.
<SS0047N>=This S/N has an incorrect Test Code Version.
<SS0048N>=This S/N has no Featuring Table Version.
<SS0049N>=This S/N has an incorrect Featuring Table Version.
<SS004AN>=This ProcID is not defined in ProcTbl.
<SS004BN>=This S/N has incorrect PfScore.
<SS0050N>=This S/N has no previous Ship Check process data.
<SS0051N>=This S/N failed at the previous Ship Check process.
<SS0060N>=This P/N is not defined in FeConvTbl
<SS0061N>=TestID is blank in SerialTbl.
<SS0062N>=This ID cannot be converted to the P/N.
<SS0070N>=This P/N is not defined in SRuleTbl.
<SS0071N>=Incorrect S/N against to the P/N.
<SS0080N>=This is not a Multi-Cell Featuring model.
<SS0081N>=Pass data of Featuring already exists.
<SS0082N>=Corrent Date is not defined in WeekTbl.
<SS0083N>=WWIDSerial cannot be made.
<SS0090N>=Pass data of Featuring already exists.
<SS0091N>=Corrent Date is not defined in WeekTbl.
<SS0092N>=WWIDSerial cannot be made.
<SS0093N>=Pass Data of Featuring dosen't exist.
<SS0094N>=Miss Customize: Featuring
<SS0095N>=DLTypeFlag is invalid.
<SS0100N>=Incorrect Micro Code Level
<SS0110N>=This S/N dosen't have P/N in SerialTbl.
<SS0111N>=This P/N isn't same as P/N in UserAsm.
<SS0120N>=UserSerial isn't same as one in UserAsm.
<SS0121N>=WWIDSerial isn't same as one in UserAsm.
<SS0130N>=This P/N is not defined in PackChkTbl.
<SS0131N>=PackChk data isn't same pattern as BCD data. [COMP]
<SS0132N>=PackChk data isn't same pattern as BCD data. [SERL]
<SS0133N>=This P/N has incorrect CheckID in PackChkTbl.
<SS0134N>=PackChk data isn't same pattern as BCD data. [USN1]
<SS0135N>=PackChk data isn't same pattern as BCD data. [USN2]
<SS0136N>=PackChk data isn't same pattern as BCD data. [MS01]
<SS0140N>=Insufficient Parts Data
<SS0141N>=Bad Parts
<SS0142N>=PartsTrace Returns Server Error
<SS0143N>=PartsTrace Returns Unknown-ID
<SS0145N>=Invalid PartsTrace Hostname
<SS0144N>=Cannot access PartsTrace
<SS0146N>=Invalid Length of PartsTrace Return
<SS0147N>=PartsTrace Timeout
<SS0148N>=PartsTrace Related Error
<SS0149N>=PartsTrace PTS Card BOM Mis-match
<SS0150N>=The Part is not allowed to be shipped
<SS0160N>=MFGID is different from FinalCompID
<SS0200I>=Cannot make WWIDSerial
<SS0500E>=Socket open error
<SS0501N>=Read 0byte from socket
<SS0502N>=Socket request length is invalid
<SS0503E>=Cannot read from socket
<SS0504N>=Length in socket request is not integer
<SS0505E>=Cannot open server socket
<SS0506E>=Cannot write to socket
<SS0507E>=Read request from socket is too short
<SS1000E>=DB2 Error
<SS1100E>=System Error
<SS1101E>=Server service stopped
<SS1102E>=I/O Error

<SP0001N>=This ProcID is not defined in ProcTbl.
<SP0010N>=This P/N is not defined in PNTbl.
<SP0020N>=This PNCheck request format is not for FeaturingPC.
<SP0021N>=This MType is not defined in DLTypeTbl.
<SP0022N>=This set of P/N and MfgID is not defined in FeConvTbl.
<SP0023N>=This ShipID is not defined in FeDLTbl.
<SP0024N>=This TblID is not defined in FeRevTbl.
<SP0025N>=There is no label-print-file for this P/N.
<SP0030N>=This PNCheck request format is not for PackChkPC.
<SP1000E>=DB2 Error
<SP1100E>=System Error
<SP1101E>=Server service stopped
<SP1102E>=I/O Error

# VQCheck
<SV0001N>=Not found process data in proctbl
<SV0002N>=Invalid packetno in proctbl
<SV0003N>=Invalid procFlag in proctbl
<SV0004N>=Invalid VenusQ data
<SV0005N>=Invalid VenusQ data size
<SV0006N>=VenusQ data has non-printable character
<SV0010N>=Invalid packetno
<SV0011N>=Old data
<SV0020N>=Not found in serialtbl
<SV0021N>=MultiColumnDef length is invalid
<SV0022N>=MultiColumnDefhas invalid data
<SV0023N>=ShipLog write Error
<SV0024N>=Some parameter in VenusQ header have blank.(ShipPartNo,CaseNo,PalletNo,BoxNo,ShipDate)	
<SV0030N>=Not found in serialtbl
<SV0031N>=Old data
<SV0040N>=Not Found ShpLog Service	
<SV0041N>=Invalid URL for ShpLog Service	
<SV1000E>=DB2 Error
<SV1100E>=System Error
<SV1101E>=server service stopped
<SV1102E>=I/O Error

# System Common
<SY0000N>=
<SY0001E>=Not found Initialfile
<SY0002E>=Cannot access Initialfile
<SY0003E>=No required key in Initialfile
<SY0004E>=Some key has no value
<SY0005E>=File not exist
<SY0006E>=Not file
<SY0007E>=Cannot read file
<SY0008E>=Cannot write file
<SY0009E>=Directory not exist
<SY000AE>=Not directory
<SY0010E>=Errorcode resource file is invalid
<SY0020E>=Cannot write log file
<SY0030E>=Another ShpChk Server Already Started!!
<SY0031E>=Cannot make lock file
<SY0040E>=DB backup file write fail
<SY0041E>=DB backup file fail
<SY0500E>=Socket open error
<SY0501N>=Read 0byte from socket
<SY0502N>=Socket request length is invalid
<SY0503E>=Cannot read from socket
<SY0504N>=Length in socket request is not integer
<SY0505E>=Cannot open server socket
<SY0506E>=Canot write to socket
<SY0507E>=Read request from socket is too short
<SY1000E>=DB2 Error
<SY1001W>=DB2 Warning
<SY1002E>=Invalid SQL statement
<SY1100E>=System Error
<SY1101E>=Server service stopped
<SY1102E>=I/O Error

# UsrAss
<SU0001N>=Cannot find the S/N. This S/N might not be tested at all test process.
<SU0002N>=IBMPartNo, S/N or MicroCode is blank
<SU0010N>=This P/N, TestID or MicroCode is not defined in MicroTbl.
<SU0011N>=The PartsID in SerialTbl dosen't match with PartsID in MicroTbl.
<SU0020N>=The number of a/b/c is different from UserSData[0/1/2] in MicroTbl.
<SU0030N>=The number of 'n' is not same as the length of SeqNo.
<SU0031N>=This P/N has invalid SeqRule in UserSNTbl.
<SU0032N>=UserSerial No. is over maximum number.
<SU0033N>=FeaturingDate in SerialTbl is older than LatestFetrDate in UserSNTbl.
<SU0034N>=LatestFetrDate is not 12bytes (YYYYMMDDWWXX)
<SU0040N>=Featuring Date in SerialTbl is less than 12bytes.
<SU0041N>=The number of 'y' ( 'r') is more than 4.
<SU0050N>=Featuring Date in SerialTbl is less than 12bytes.
<SU0051N>=The number of 'm'( 's') is invalid
<SU0060N>=Featuring Date in SerialTbl is less than 12bytes.
<SU0061N>=The number of 'd'('t') is invalid
<SU0070N>=Featuring Date in SerialTbl is less than 12 bytes
<SU0071N>=The number of 'p'('w') is invalid
<SU0080N>=Featuring Date in SerialTbl is less than 12 bytes
<SU0081N>=The number of 'q'('x') is invalid
<SU0090N>=The number of 'e' (MLC) is more than 7bytes
<SU0100N>=The number of 'f' (Serial) is more than 12bytes
<SU0110N>=The number of 'g' (CalcSerial) is not 6bytes
<SU0111N>=WWIDSerial is less than 6 bytes.
<SU0120N>=The number of 'h' (P/N) is less than length of IBMPartNo.
<SU1000E>=DB2 Error
<SU1100E>=System Error
<SU1101E>=Server service stopped
<SU1102E>=I/O Error

# DBCopy
<SC0001E>=File not exist
<SC0002E>=Not a file
<SC0003E>=Cannot read file
<SC0004E>=Cannot write file
<SC0005E>=Cannot open InpurStream
<SC0006E>=Cannot open OutputStream
<SC0007E>=Restore file is invalid
<SC0010E>=Invalid SQL statement
<SC1000E>=DB2 error
<SC1001W>=DB2 warning
<SC1002E>=Invalid SQL statement
<SC1003E>=DB2 error (Cannot update/insert/delete table)
<SC1100E>=System error
<SC1101E>=Server service stopped
<SC1102E>=I/O error
	
# Maint
<SM0000N>=Maintenance success
<SM0001N>=Invalid Request	
<SM0002N>=File not found	
<SM1000E>=DB2 error
<SM1001W>=DB2 warning
<SM1002N>=Invalid SQL statement
<SM1003N>=DB2 error (Cannot update/insert/delete table)
<SM1100E>=System error
<SM1101E>=Server service stopped
<SM1102E>=I/O error