📄 test__.c
字号:
cpu_sr = 0; /* Prevent compiler warning */
#endif
OSTimeDly(2); /* Synchronize with clock tick */
OS_ENTER_CRITICAL();
OSIdleCtr = 0L; /* Clear idle counter */
OS_EXIT_CRITICAL();
OSTimeDly(OS_TICKS_PER_SEC / 10); /* Determine MAX. idle counter value for 1/10 second */
OS_ENTER_CRITICAL();
OSIdleCtrMax = OSIdleCtr; /* Store maximum idle counter count in 1/10 second */
OSStatRdy = TRUE;
OS_EXIT_CRITICAL();
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* PROCESS SYSTEM TICK
*
* Description: This function is used to signal to uC/OS-II the occurrence of a 'system tick' (also known
* as a 'clock tick'). This function should be called by the ticker ISR but, can also be
* called by a high priority task.
*
* Arguments : none
*
* Returns : none
*********************************************************************************************************
*/
void OSTimeTick (void)
{
OS_TCB *ptcb;
#if OS_TICK_STEP_EN > 0
BOOLEAN step;
#endif
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
cpu_sr = 0; /* Prevent compiler warning */
#endif
#if OS_TIME_TICK_HOOK_EN > 0
OSTimeTickHook(); /* Call user definable hook */
#endif
#if OS_TIME_GET_SET_EN > 0
OS_ENTER_CRITICAL(); /* Update the 32-bit tick counter */
OSTime++;
OS_EXIT_CRITICAL();
#endif
if (OSRunning == TRUE) {
#if OS_TICK_STEP_EN > 0
switch (OSTickStepState) { /* Determine whether we need to process a tick */
case OS_TICK_STEP_DIS: /* Yes, stepping is disabled */
step = TRUE;
break;
case OS_TICK_STEP_WAIT: /* No, waiting for uC/OS-View to set ... */
step = FALSE; /* .. OSTickStepState to OS_TICK_STEP_ONCE */
break;
case OS_TICK_STEP_ONCE: /* Yes, process tick once and wait for next ... */
step = TRUE; /* ... step command from uC/OS-View */
OSTickStepState = OS_TICK_STEP_WAIT;
break;
default: /* Invalid case, correct situation */
step = TRUE;
OSTickStepState = OS_TICK_STEP_DIS;
break;
}
if (step == FALSE) { /* Return if waiting for step command */
return;
}
#endif
ptcb = OSTCBList; /* Point at first TCB in TCB list */
while (ptcb->OSTCBPrio != OS_IDLE_PRIO) { /* Go through all TCBs in TCB list */
OS_ENTER_CRITICAL();
if (ptcb->OSTCBDly != 0) { /* No, Delayed or waiting for event with TO */
if (--ptcb->OSTCBDly == 0) { /* Decrement nbr of ticks to end of delay */
/* Check for timeout */
if ((ptcb->OSTCBStat & OS_STAT_PEND_ANY) != OS_STAT_RDY) {
ptcb->OSTCBStat &= ~OS_STAT_PEND_ANY; /* Yes, Clear status flag */
ptcb->OSTCBPendTO = TRUE; /* Indicate PEND timeout */
} else {
ptcb->OSTCBPendTO = FALSE;
}
if ((ptcb->OSTCBStat & OS_STAT_SUSPEND) == OS_STAT_RDY) { /* Is task suspended? */
OSRdyGrp |= ptcb->OSTCBBitY; /* No, Make ready */
OSRdyTbl[ptcb->OSTCBY] |= ptcb->OSTCBBitX;
}
}
}
ptcb = ptcb->OSTCBNext; /* Point at next TCB in TCB list */
OS_EXIT_CRITICAL();
}
}
}
/*$PAGE*/
/*
*********************************************************************************************************
* GET VERSION
*
* Description: This function is used to return the version number of uC/OS-II. The returned value
* corresponds to uC/OS-II's version number multiplied by 100. In other words, version 2.00
* would be returned as 200.
*
* Arguments : none
*
* Returns : the version number of uC/OS-II multiplied by 100.
*********************************************************************************************************
*/
INT16U OSVersion (void)
{
return (OS_VERSION);
}
/*$PAGE*/
/*
*********************************************************************************************************
* DUMMY FUNCTION
*
* Description: This function doesn't do anything. It is called by OSTaskDel().
*
* Arguments : none
*
* Returns : none
*********************************************************************************************************
*/
#if OS_TASK_DEL_EN > 0
void OS_Dummy (void)
{
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* MAKE TASK READY TO RUN BASED ON EVENT OCCURING
*
* Description: This function is called by other uC/OS-II services and is used to ready a task that was
* waiting for an event to occur.
*
* Arguments : pevent is a pointer to the event control block corresponding to the event.
*
* msg is a pointer to a message. This pointer is used by message oriented services
* such as MAILBOXEs and QUEUEs. The pointer is not used when called by other
* service functions.
*
* msk is a mask that is used to clear the status byte of the TCB. For example,
* OSSemPost() will pass OS_STAT_SEM, OSMboxPost() will pass OS_STAT_MBOX etc.
*
* Returns : none
*
* Note : This function is INTERNAL to uC/OS-II and your application should not call it.
*********************************************************************************************************
*/
#if OS_EVENT_EN
INT8U OS_EventTaskRdy (OS_EVENT *pevent, void *msg, INT8U msk)
{
OS_TCB *ptcb;
INT8U x;
INT8U y;
INT8U bitx;
INT8U bity;
INT8U prio;
y = OSUnMapTbl[pevent->OSEventGrp]; /* Find HPT waiting for message */
bity = OSMapTbl[y];
x = OSUnMapTbl[pevent->OSEventTbl[y]];
bitx = OSMapTbl[x];
prio = (INT8U)((y << 3) + x); /* Find priority of task getting the msg */
pevent->OSEventTbl[y] &= ~bitx; /* Remove this task from the waiting list */
if (pevent->OSEventTbl[y] == 0x00) {
pevent->OSEventGrp &= ~bity; /* Clr group bit if this was only task pending */
}
ptcb = OSTCBPrioTbl[prio]; /* Point to this task's OS_TCB */
ptcb->OSTCBDly = 0; /* Prevent OSTimeTick() from readying task */
ptcb->OSTCBEventPtr = (OS_EVENT *)0; /* Unlink ECB from this task */
#if ((OS_Q_EN > 0) && (OS_MAX_QS > 0)) || (OS_MBOX_EN > 0)
ptcb->OSTCBMsg = msg; /* Send message directly to waiting task */
#else
msg = msg; /* Prevent compiler warning if not used */
#endif
ptcb->OSTCBPendTO = FALSE; /* Cancel 'any' timeout because of post */
ptcb->OSTCBStat &= ~msk; /* Clear bit associated with event type */
if (ptcb->OSTCBStat == OS_STAT_RDY) { /* See if task is ready (could be susp'd) */
OSRdyGrp |= bity; /* Put task in the ready to run list */
OSRdyTbl[y] |= bitx;
}
return (prio);
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* MAKE TASK WAIT FOR EVENT TO OCCUR
*
* Description: This function is called by other uC/OS-II services to suspend a task because an event has
* not occurred.
*
* Arguments : pevent is a pointer to the event control block for which the task will be waiting for.
*
* Returns : none
*
* Note : This function is INTERNAL to uC/OS-II and your application should not call it.
*********************************************************************************************************
*/
#if OS_EVENT_EN
void OS_EventTaskWait (OS_EVENT *pevent)
{
INT8U y;
OSTCBCur->OSTCBEventPtr = pevent; /* Store pointer to event control block in TCB */
y = OSTCBCur->OSTCBY; /* Task no longer ready */
OSRdyTbl[y] &= ~OSTCBCur->OSTCBBitX;
if (OSRdyTbl[y] == 0x00) {
OSRdyGrp &= ~OSTCBCur->OSTCBBitY; /* Clear event grp bit if this was only task pending */
}
pevent->OSEventTbl[OSTCBCur->OSTCBY] |= OSTCBCur->OSTCBBitX; /* Put task in waiting list */
pevent->OSEventGrp |= OSTCBCur->OSTCBBitY;
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* MAKE TASK READY TO RUN BASED ON EVENT TIMEOUT
*
* Description: This function is called by other uC/OS-II services to make a task ready to run because a
* timeout occurred.
*
* Arguments : pevent is a pointer to the event control block which is readying a task.
*
* Returns : none
*
* Note : This function is INTERNAL to uC/OS-II and your application should not call it.
*********************************************************************************************************
*/
#if OS_EVENT_EN
void OS_EventTO (OS_EVENT *pevent)
{
INT8U y;
y = OSTCBCur->OSTCBY;
pevent->OSEventTbl[y] &= ~OSTCBCur->OSTCBBitX; /* Remove task from wait list */
if (pevent->OSEventTbl[y] == 0x00) {
pevent->OSEventGrp &= ~OSTCBCur->OSTCBBitY;
}
OSTCBCur->OSTCBPendTO = FALSE; /* Clear the Pend Timeout flag */
OSTCBCur->OSTCBStat = OS_STAT_RDY; /* Set status to ready */
OSTCBCur->OSTCBEventPtr = (OS_EVENT *)0; /* No longer waiting for event */
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* INITIALIZE EVENT CONTROL BLOCK'S WAIT LIST
*
* Description: This function is called by other uC/OS-II services to initialize the event wait list.
*
* Arguments : pevent is a pointer to the event control block allocated to the event.
*
* Returns : none
*
* Note : This function is INTERNAL to uC/OS-II and your application should not call it.
*********************************************************************************************************
*/
#if OS_EVENT_EN
void OS_EventWaitListInit (OS_EVENT *pevent)
{
INT8U *ptbl;
pevent->OSEventGrp = 0x00; /* No task waiting on event */
ptbl = &pevent->OSEventTbl[0];
#if OS_EVENT_TBL_SIZE > 0
*ptbl++ = 0x00;
#endif
#if OS_EVENT_TBL_SIZE > 1
*ptbl++ = 0x00;
#endif
#if OS_EVENT_TBL_SIZE > 2
*ptbl++ = 0x00;
#endif
#if OS_EVENT_TBL_SIZE > 3
*ptbl++ = 0x00;
#endif
#if OS_EVENT_TBL_SIZE > 4
*ptbl++ = 0x00;
#endif
#if OS_EVENT_TBL_SIZE > 5
*ptbl++ = 0x00;
#endif
#if OS_EVENT_TBL_SIZE > 6
*ptbl++ = 0x00;
#endif
#if OS_EVENT_TBL_SIZE > 7
*ptbl = 0x00;
#endif
}
#endif
/*$PAGE*/
/*
*********************************************************************************************************
* INITIALIZATION
* INITIALIZE THE FREE LIST OF EVENT CONTROL BLOCKS
*
* Description: This function is called by OSInit() to initialize the free list of event control blocks.
*
* Arguments : none
*
* Returns : none
*********************************************************************************************************
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -