board.h

Nand read command file

/// SPI0 MISO pin definition.
#define PIN_SPI0_MISO  {1 << 0, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_PULLUP}
/// SPI0 MOSI pin definition.
#define PIN_SPI0_MOSI  {1 << 1, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// SPI0 SPCK pin definition.
#define PIN_SPI0_SPCK  {1 << 2, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// List of SPI0 pin definitions (MISO, MOSI & SPCK).
#define PINS_SPI0      PIN_SPI0_MISO, PIN_SPI0_MOSI, PIN_SPI0_SPCK	
/// SPI0 chip select 0 pin definition.
#define PIN_SPI0_NPCS0 {AT91C_PA3_SPI0_NPCS0, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// SPI0 chip select 1 pin definition.
#define PIN_SPI0_NPCS1 {AT91C_PC11_SPI0_NPCS1, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}

/// SPI1 MISO pin definition.
#define PIN_SPI1_MISO  {1 << 0, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_PULLUP}
/// SPI1 MOSI pin definition.
#define PIN_SPI1_MOSI  {1 << 1, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
/// SPI1 SPCK pin definition.
#define PIN_SPI1_SPCK  {1 << 2, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
/// List of SPI1 pin definitions (MISO, MOSI & SPCK).
#define PINS_SPI1      PIN_SPI1_MISO, PIN_SPI1_MOSI, PIN_SPI1_SPCK	
/// SPI0 chip select 0 pin definition.
#define PIN_SPI1_NPCS0 {1 << 3, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}

/// SSC transmitter pins definition.
#define PINS_SSC_TX  {0x00070000, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}

/// USB VBus monitoring pin definition.
#define PIN_USB_VBUS    {1 << 5, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_INPUT, PIO_DEFAULT}

/// List of MCI pins definitions.
#define PINS_MCI  \
    {0x0000003B, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_PULLUP}, \
    {1 << 8, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

/// TWI pins definition.
#define PINS_TWI  {0x01800000, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
/// \page "SAM9260-EK - External components"
/// This page lists the definitions related to external on-board components
/// located in the board.h file for the AT91SAM9260-EK.
/// 
/// !AT45 Dataflash Card (A)
/// - BOARD_AT45_A_SPI_BASE
/// - BOARD_AT45_A_SPI_ID
/// - BOARD_AT45_A_SPI_PINS
/// - BOARD_AT45_A_SPI
/// - BOARD_AT45_A_NPCS
/// - BOARD_AT45_A_NPCS_PIN
/// 
/// !AT45 Dataflash (B)
/// - BOARD_AT45_B_SPI_BASE
/// - BOARD_AT45_B_SPI_ID
/// - BOARD_AT45_B_SPI_PINS
/// - BOARD_AT45_B_SPI
/// - BOARD_AT45_B_NPCS
/// - BOARD_AT45_B_NPCS_PIN
/// 
/// !SD Card
/// - BOARD_SD_MCI_BASE
/// - BOARD_SD_MCI_ID
/// - BOARD_SD_PINS
/// - BOARD_SD_SLOT
///
/// !AT73C213
/// - BOARD_AT73C213_SPI
/// - BOARD_AT73C213_SPI_ID
/// - BOARD_AT73C213_NPCS
/// - BOARD_AT73C213_SSC
/// - BOARD_AT73C213_SSC_ID
///
/// !EMAC
/// - BOARD_EMAC_POWER_ALWAYS_ON
/// - BOARD_EMAC_MODE_RMII
/// - BOARD_EMAC_PINS
/// - BOARD_EMAC_PIN_TEST
/// - BOARD_EMAC_PIN_RMII
/// - BOARD_EMAC_PINS_PHYAD
/// - BOARD_EMAC_PIN_10BT
/// - BOARD_EMAC_PIN_RPTR
/// - BOARD_EMAC_RST_PINS
/// - BOARD_EMAC_RUN_PINS

/// Base address of SPI peripheral connected to the dataflash.
#define BOARD_AT45_A_SPI_BASE         AT91C_BASE_SPI0
/// Identifier of SPI peripheral connected to the dataflash.
#define BOARD_AT45_A_SPI_ID           AT91C_ID_SPI0
/// Pins of the SPI peripheral connected to the dataflash.
#define BOARD_AT45_A_SPI_PINS         PINS_SPI0
/// Dataflahs SPI number.
#define BOARD_AT45_A_SPI              0
/// Chip select connected to the dataflash.
#define BOARD_AT45_A_NPCS             0
/// Chip select pin connected to the dataflash.
#define BOARD_AT45_A_NPCS_PIN         PIN_SPI0_NPCS0

/// Base address of SPI peripheral connected to the dataflash.
#define BOARD_AT45_B_SPI_BASE         AT91C_BASE_SPI0
/// Identifier of SPI peripheral connected to the dataflash.
#define BOARD_AT45_B_SPI_ID           AT91C_ID_SPI0
/// Pins of the SPI peripheral connected to the dataflash.
#define BOARD_AT45_B_SPI_PINS         PINS_SPI0
/// Dataflahs SPI number.
#define BOARD_AT45_B_SPI              0
/// Chip select connected to the dataflash.
#define BOARD_AT45_B_NPCS             1
/// Chip select pin connected to the dataflash.
#define BOARD_AT45_B_NPCS_PIN         PIN_SPI0_NPCS1

/// Base address of SPI peripheral connected to the serialflash.
#define BOARD_AT26_A_SPI_BASE         AT91C_BASE_SPI0
/// Identifier of SPI peripheral connected to the dataflash.
#define BOARD_AT26_A_SPI_ID           AT91C_ID_SPI0
/// Pins of the SPI peripheral connected to the dataflash.
#define BOARD_AT26_A_SPI_PINS         PINS_SPI0
/// Dataflahs SPI number.
#define BOARD_AT26_A_SPI              0
/// Chip select connected to the dataflash.
#define BOARD_AT26_A_NPCS             0
/// Chip select pin connected to the dataflash.
#define BOARD_AT26_A_NPCS_PIN         PIN_SPI0_NPCS0

/// Base address of the MCI peripheral connected to the SD card.
#define BOARD_SD_MCI_BASE           AT91C_BASE_MCI
/// Peripheral identifier of the MCI connected to the SD card.
#define BOARD_SD_MCI_ID             AT91C_ID_MCI
/// MCI pins that shall be configured to access the SD card.
#define BOARD_SD_PINS               PINS_MCI
/// MCI slot to which the SD card is connected to.
#define BOARD_SD_SLOT               MCI_SD_SLOTB

/// Base address of SPI peripheral to which the DAC is connected.
#define BOARD_AT73C213_SPI          AT91C_BASE_SPI1
/// Peripheral ID of the SPI connected to the DAC.
#define BOARD_AT73C213_SPI_ID       AT91C_ID_SPI1
/// Chip select value for accessing the DAC with the SPI.
#define BOARD_AT73C213_SPI_NPCS     0
/// Pins to configure for the SPI interface.
#define BOARD_AT73C213_SPI_PINS     PINS_SPI1, PIN_SPI1_NPCS0
/// SSC peripheral to which the DAC is connected.
#define BOARD_AT73C213_SSC          AT91C_BASE_SSC0
/// Peripheral ID of the SSC connected to the DAC.
#define BOARD_AT73C213_SSC_ID       AT91C_ID_SSC0
/// Pins to configure for the SSC interface.
#define BOARD_AT73C213_SSC_PINS     PINS_SSC_TX

/// Board EMAC base address
#if !defined(AT91C_BASE_EMAC) && defined(AT91C_BASE_EMACB)
#define AT91C_BASE_EMAC             AT91C_BASE_EMACB
#endif
/// Board EMAC power control - ALWAYS ON
#define BOARD_EMAC_POWER_ALWAYS_ON
/// Board EMAC work mode - RMII/MII ( 1 / 0 )
#define BOARD_EMAC_MODE_RMII        1
/// The PIN list of PIO for EMAC
#define BOARD_EMAC_PINS     {  (1<<19)|(1<<13)|(1<<12)|(1<<16)|(1<<15)|(1<<14)\
                              |(1<<17)|(1<<18)|(1<<20)|(1<<21)|(1<<7),\
                              AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}, \
                            {  (1<<11)|(1<<10)|(1<<26)|(1<<25)|(1<<27)|(1<<22)\
                              |(1<<29)|(1<<28),\
                              AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/// The power up reset latch PIO for PHY
#define BOARD_EMAC_PIN_TEST   {(1<<17), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define BOARD_EMAC_PIN_RMII   {(1<<29), AT91C_BASE_PIOA, AT91C_ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT}
// We force the address
//(1<<14) PHY address 0, (1<<15) PHY address 1, (1<<25) PHY address 2,
//(1<<26) PHY address 3, (1<<28) PHY address 4
#define BOARD_EMAC_PINS_PHYAD {(1<<14)|(1<<15),\
                               AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}, \
                              {(1<<26)|(1<<25)|(1<<28),\
                               AT91C_BASE_PIOA, AT91C_ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
#define BOARD_EMAC_PIN_10BT   {(1<<27), AT91C_BASE_PIOA, AT91C_ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
#define BOARD_EMAC_PIN_RPTR   {(1<<18), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/// The PIN Configure list for EMAC on power up reset (RMII)
#define BOARD_EMAC_RST_PINS BOARD_EMAC_PINS_PHYAD, \
                            BOARD_EMAC_PIN_TEST, BOARD_EMAC_PIN_RMII, \
                            BOARD_EMAC_PIN_10BT, BOARD_EMAC_PIN_RPTR
/// The runtime pin configure list for EMAC
#define BOARD_EMAC_RUN_PINS BOARD_EMAC_PINS
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
/// \page "SAM9260-EK - Memories"
/// This page lists definitions related to external on-board memories.
/// 
/// !SDRAM
/// - BOARD_SDRAM_SIZE
/// - PINS_SDRAM
///
/// !Nandflash
/// - PINS_NANDFLASH
/// - BOARD_NF_EBI_COMMAND_ADDR
/// - BOARD_NF_EBI_ADDRESS_ADDR
/// - BOARD_NF_EBI_DATA_ADDR
/// - BOARD_NF_CE_PIN
/// - BOARD_NF_RB_PIN
///
/// !NorFlash
/// - BOARD_NORFLASH_ADDR

/// Board SDRAM size
#define BOARD_SDRAM_SIZE   0x04000000
/// List of all SDRAM pins definitions.
#define PINS_SDRAM  {0xFFFF0000, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_PERIPH_A, PIO_DEFAULT}

/// Nandflash controller peripheral pins definition.
#define PINS_NANDFLASH          BOARD_NF_CE_PIN, BOARD_NF_RB_PIN
/// Nandflash chip enable pin definition.
#define BOARD_NF_CE_PIN         {1 << 14, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
/// Nandflash ready/busy pin definition.
#define BOARD_NF_RB_PIN         {1 << 13, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_INPUT, PIO_PULLUP}
/// Address for transferring command bytes to the nandflash.
#define BOARD_NF_COMMAND_ADDR   0x40400000
/// Address for transferring address bytes to the nandflash.
#define BOARD_NF_ADDRESS_ADDR   0x40200000
/// Address for transferring data bytes to the nandflash.
#define BOARD_NF_DATA_ADDR      0x40000000

/// Address for transferring command bytes to the norflash.
#define BOARD_NORFLASH_ADDR     0x10000000
//------------------------------------------------------------------------------

#endif //#ifndef BOARD_H