⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c

📁 gumstiz u-boot loader in linux
💻 C
字号:
/* * (C) Copyright 2003 * AMIRIX Systems Inc. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <ppc4xx.h>#include <asm/processor.h>#include <pci.h>#define PCI_MEM_82559ER_CSR_BASE    0x30200000#define PCI_IO_82559ER_CSR_BASE     0x40000200/** AP1100 specific values */#define PSII_BASE                   0x30000000	  /**< PowerSpan II dual bridge local bus register address */#define PSII_CONFIG_ADDR            0x30000290	  /**< PowerSpan II Configuration Cycle Address configuration register */#define PSII_CONFIG_DATA            0x30000294	  /**< PowerSpan II Configuration Cycle Data register. */#define PSII_CONFIG_DEST_PCI2       0x01000000	  /**< PowerSpan II configuration cycle destination selection, set for PCI2 bus */#define PSII_PCI_MEM_BASE           0x30200000	  /**< Local Bus address for start of PCI memory space on PCI2 bus. */#define PSII_PCI_MEM_SIZE           0x1BE00000	  /**< PCI Memory space about 510 Meg. */#define AP1000_SYS_MEM_START        0x00000000	  /**< System memory starts at 0. */#define AP1000_SYS_MEM_SIZE         0x08000000	  /**< System memory is 128 Meg. *//* static int G_verbosity_level = 1; */#define G_verbosity_level 1void write1 (unsigned long addr, unsigned char val){	volatile unsigned char *p = (volatile unsigned char *) addr;	if (G_verbosity_level > 1)		printf ("write1: addr=%08x val=%02x\n", (unsigned int) addr,			val);	*p = val;	asm ("eieio");}unsigned char read1 (unsigned long addr){	unsigned char val;	volatile unsigned char *p = (volatile unsigned char *) addr;	if (G_verbosity_level > 1)		printf ("read1: addr=%08x ", (unsigned int) addr);	val = *p;	asm ("eieio");	if (G_verbosity_level > 1)		printf ("val=%08x\n", val);	return val;}void write2 (unsigned long addr, unsigned short val){	volatile unsigned short *p = (volatile unsigned short *) addr;	if (G_verbosity_level > 1)		printf ("write2: addr=%08x val=%04x -> *p=%04x\n",			(unsigned int) addr, val,			((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));	*p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);	asm ("eieio");}unsigned short read2 (unsigned long addr){	unsigned short val;	volatile unsigned short *p = (volatile unsigned short *) addr;	if (G_verbosity_level > 1)		printf ("read2: addr=%08x ", (unsigned int) addr);	val = *p;	val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);	asm ("eieio");	if (G_verbosity_level > 1)		printf ("*p=%04x -> val=%04x\n",			((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8), val);	return val;}void write4 (unsigned long addr, unsigned long val){	volatile unsigned long *p = (volatile unsigned long *) addr;	if (G_verbosity_level > 1)		printf ("write4: addr=%08x val=%08x -> *p=%08x\n",			(unsigned int) addr, (unsigned int) val,			(unsigned int) (((val & 0xFF000000) >> 24) |					((val & 0x000000FF) << 24) |					((val & 0x00FF0000) >> 8) |					((val & 0x0000FF00) << 8)));	*p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);	asm ("eieio");}unsigned long read4 (unsigned long addr){	unsigned long val;	volatile unsigned long *p = (volatile unsigned long *) addr;	if (G_verbosity_level > 1)		printf ("read4: addr=%08x", (unsigned int) addr);	val = *p;	val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);	asm ("eieio");	if (G_verbosity_level > 1)		printf ("*p=%04x -> val=%04x\n",			(unsigned int) (((val & 0xFF000000) >> 24) |					((val & 0x000000FF) << 24) |					((val & 0x00FF0000) >> 8) |					((val & 0x0000FF00) << 8)),			(unsigned int) val);	return val;}void write4be (unsigned long addr, unsigned long val){	volatile unsigned long *p = (volatile unsigned long *) addr;	if (G_verbosity_level > 1)		printf ("write4: addr=%08x val=%08x\n", (unsigned int) addr,			(unsigned int) val);	*p = val;	asm ("eieio");}/** One byte configuration write on PSII. *  Currently fixes destination PCI bus to PCI2, onboard *  pci. *  @param    hose    PCI Host controller information. Ignored. *  @param    dev        Encoded PCI device/Bus and Function value. *  @param    reg        PCI Configuration register number. *  @param    val        Address of location for received byte. *  @return Always Zero. */static int psII_read_config_byte (struct pci_controller *hose,				  pci_dev_t dev, int reg, u8 * val){	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */	*val = read1 (PSII_CONFIG_DATA + (reg & 0x03));	return (0);}/** One byte configuration write on PSII. *  Currently fixes destination bus to PCI2, onboard *  pci. *  @param    hose    PCI Host controller information. Ignored. *  @param    dev        Encoded PCI device/Bus and Function value. *  @param    reg        PCI Configuration register number. *  @param    val        Output byte. *  @return Always Zero. */static int psII_write_config_byte (struct pci_controller *hose,				   pci_dev_t dev, int reg, u8 val){	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */	write1 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned char) val);	return (0);}/** One word (16 bit) configuration read on PSII. *  Currently fixes destination PCI bus to PCI2, onboard *  pci. *  @param    hose    PCI Host controller information. Ignored. *  @param    dev        Encoded PCI device/Bus and Function value. *  @param    reg        PCI Configuration register number. *  @param    val        Address of location for received word. *  @return Always Zero. */static int psII_read_config_word (struct pci_controller *hose,				  pci_dev_t dev, int reg, u16 * val){	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */	*val = read2 (PSII_CONFIG_DATA + (reg & 0x03));	return (0);}/** One word (16 bit) configuration write on PSII. *  Currently fixes destination bus to PCI2, onboard *  pci. *  @param    hose    PCI Host controller information. Ignored. *  @param    dev        Encoded PCI device/Bus and Function value. *  @param    reg        PCI Configuration register number. *  @param    val        Output word. *  @return Always Zero. */static int psII_write_config_word (struct pci_controller *hose,				   pci_dev_t dev, int reg, u16 val){	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */	write2 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned short) val);	return (0);}/** One DWord (32 bit) configuration read on PSII. *  Currently fixes destination PCI bus to PCI2, onboard *  pci. *  @param    hose    PCI Host controller information. Ignored. *  @param    dev        Encoded PCI device/Bus and Function value. *  @param    reg        PCI Configuration register number. *  @param    val        Address of location for received byte. *  @return Always Zero. */static int psII_read_config_dword (struct pci_controller *hose,				   pci_dev_t dev, int reg, u32 * val){	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */	*val = read4 (PSII_CONFIG_DATA);	return (0);}/** One DWord (32 bit) configuration write on PSII. *  Currently fixes destination bus to PCI2, onboard *  pci. *  @param    hose    PCI Host controller information. Ignored. *  @param    dev        Encoded PCI device/Bus and Function value. *  @param    reg        PCI Configuration register number. *  @param    val        Output Dword. *  @return Always Zero. */static int psII_write_config_dword (struct pci_controller *hose,				    pci_dev_t dev, int reg, u32 val){	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */	write4 (PSII_CONFIG_DATA, (unsigned long) val);	return (0);}static struct pci_config_table ap1000_config_table[] = {#ifdef CONFIG_AP1000	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,	 PCI_BUS (CFG_ETH_DEV_FN), PCI_DEV (CFG_ETH_DEV_FN),	 PCI_FUNC (CFG_ETH_DEV_FN),	 pci_cfgfunc_config_device,	 {CFG_ETH_IOBASE, CFG_ETH_MEMBASE,	  PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},#endif	{}};static struct pci_controller psII_hose = {      config_table:ap1000_config_table,};void pci_init_board (void){	struct pci_controller *hose = &psII_hose;	/*	 * Register the hose	 */	hose->first_busno = 0;	hose->last_busno = 0xff;	/* System memory space */	pci_set_region (hose->regions + 0,			AP1000_SYS_MEM_START, AP1000_SYS_MEM_START,			AP1000_SYS_MEM_SIZE,			PCI_REGION_MEM | PCI_REGION_MEMORY);	/* PCI Memory space */	pci_set_region (hose->regions + 1,			PSII_PCI_MEM_BASE, PSII_PCI_MEM_BASE,			PSII_PCI_MEM_SIZE, PCI_REGION_MEM);	/* No IO Memory space  - for now */	pci_set_ops (hose,		     psII_read_config_byte,		     psII_read_config_word,		     psII_read_config_dword,		     psII_write_config_byte,		     psII_write_config_word, psII_write_config_dword);	hose->region_count = 2;	pci_register_hose (hose);	hose->last_busno = pci_hose_scan (hose);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -