pm.c

gumstiz u-boot loader in linux

    /* TODO: This function calls a real mode far function with a far call. */
    /*       If you do not support BIOS access, this function should be */
    /*       empty. */
}

/****************************************************************************
REMARKS:
Return the amount of available memory.
****************************************************************************/
void PMAPI PM_availableMemory(
    ulong *physical,
    ulong *total)
{
    /* TODO: Report the amount of available memory, both the amount of */
    /*       physical memory left and the amount of virtual memory left. */
    /*       If the OS does not provide these services, report 0's. */
    *physical = *total = 0;
}

/****************************************************************************
REMARKS:
Allocate a block of locked, physical memory for DMA operations.
****************************************************************************/
void * PMAPI PM_allocLockedMem(
    uint size,
    ulong *physAddr,
    ibool contiguous,
    ibool below16M)
{
    /* TODO: Allocate a block of locked, physical memory of the specified */
    /*       size. This is used for bus master operations. If this is not */
    /*       supported by the OS, return NULL and bus mastering will not */
    /*       be used. */
    return NULL;
}

/****************************************************************************
REMARKS:
Free a block of locked physical memory.
****************************************************************************/
void PMAPI PM_freeLockedMem(
    void *p,
    uint size,
    ibool contiguous)
{
    /* TODO: Free a memory block allocated with PM_allocLockedMem. */
}

/****************************************************************************
REMARKS:
Call the VBE/Core software interrupt to change display banks.
****************************************************************************/
void PMAPI PM_setBankA(
    int bank)
{
    RMREGS  regs;

    /* TODO: This does a bank switch function by calling the real mode */
    /*       VESA BIOS. If you do not support BIOS access, this function should */
    /*       be empty. */
    regs.x.ax = 0x4F05;
    regs.x.bx = 0x0000;
    regs.x.dx = bank;
    PM_int86(0x10,&regs,&regs);
}

/****************************************************************************
REMARKS:
Call the VBE/Core software interrupt to change display banks.
****************************************************************************/
void PMAPI PM_setBankAB(
    int bank)
{
    RMREGS  regs;

    /* TODO: This does a bank switch function by calling the real mode */
    /*       VESA BIOS. If you do not support BIOS access, this function should */
    /*       be empty. */
    regs.x.ax = 0x4F05;
    regs.x.bx = 0x0000;
    regs.x.dx = bank;
    PM_int86(0x10,&regs,&regs);
    regs.x.ax = 0x4F05;
    regs.x.bx = 0x0001;
    regs.x.dx = bank;
    PM_int86(0x10,&regs,&regs);
}

/****************************************************************************
REMARKS:
Call the VBE/Core software interrupt to change display start address.
****************************************************************************/
void PMAPI PM_setCRTStart(
    int x,
    int y,
    int waitVRT)
{
    RMREGS  regs;

    /* TODO: This changes the display start address by calling the real mode */
    /*       VESA BIOS. If you do not support BIOS access, this function */
    /*       should be empty. */
    regs.x.ax = 0x4F07;
    regs.x.bx = waitVRT;
    regs.x.cx = x;
    regs.x.dx = y;
    PM_int86(0x10,&regs,&regs);
}

/****************************************************************************
REMARKS:
Enable write combining for the memory region.
****************************************************************************/
ibool PMAPI PM_enableWriteCombine(
    ulong base,
    ulong length,
    uint type)
{
    /* TODO: This function should enable Pentium Pro and Pentium II MTRR */
    /*       write combining for the passed in physical memory base address */
    /*       and length. Normally this is done via calls to an OS specific */
    /*       device driver as this can only be done at ring 0. */
    /* */
    /* NOTE: This is a *very* important function to implement! If you do */
    /*       not implement, graphics performance on the latest Intel chips */
    /*       will be severly impaired. For sample code that can be used */
    /*       directly in a ring 0 device driver, see the MSDOS implementation */
    /*       which includes assembler code to do this directly (if the */
    /*       program is running at ring 0). */
    return false;
}

/****************************************************************************
REMARKS:
Execute the POST on the secondary BIOS for a controller.
****************************************************************************/
ibool PMAPI PM_doBIOSPOST(
    ushort axVal,
    ulong BIOSPhysAddr,
    void *mappedBIOS)
{
    /* TODO: This function is used to run the BIOS POST code on a secondary */
    /*       controller to initialise it for use. This is not necessary */
    /*       for multi-controller operation, but it will make it a lot */
    /*       more convenicent for end users (otherwise they have to boot */
    /*       the system once with the secondary controller as primary, and */
    /*       then boot with both controllers installed). */
    /* */
    /*       Even if you don't support full BIOS access, it would be */
    /*       adviseable to be able to POST the secondary controllers in the */
    /*       system using this function as a minimum requirement. Some */
    /*       graphics hardware has registers that contain values that only */
    /*       the BIOS knows about, which makes bring up a card from cold */
    /*       reset difficult if the BIOS has not POST'ed it. */
    return false;
}

/****************************************************************************
REMARKS:
Load an OS specific shared library or DLL. If the OS does not support
shared libraries, simply return NULL.
****************************************************************************/
PM_MODULE PMAPI PM_loadLibrary(
    const char *szDLLName)
{
    /* TODO: This function should load a native shared library from disk */
    /*       given the path to the library. */
    (void)szDLLName;
    return NULL;
}

/****************************************************************************
REMARKS:
Get the address of a named procedure from a shared library.
****************************************************************************/
void * PMAPI PM_getProcAddress(
    PM_MODULE hModule,
    const char *szProcName)
{
    /* TODO: This function should return the address of a named procedure */
    /*       from a native shared library. */
    (void)hModule;
    (void)szProcName;
    return NULL;
}

/****************************************************************************
REMARKS:
Unload a shared library.
****************************************************************************/
void PMAPI PM_freeLibrary(
    PM_MODULE hModule)
{
    /* TODO: This function free a previously loaded native shared library. */
    (void)hModule;
}

/****************************************************************************
REMARKS:
Enable requested I/O privledge level (usually only to set to a value of
3, and then restore it back again). If the OS is protected this function
must be implemented in order to enable I/O port access for ring 3
applications. The function should return the IOPL level active before
the switch occurred so it can be properly restored.
****************************************************************************/
int PMAPI PM_setIOPL(
    int level)
{
    /* TODO: This function should enable IOPL for the task (if IOPL is */
    /*       not always enabled for the app through some other means). */
    return level;
}

/****************************************************************************
REMARKS:
Function to find the first file matching a search criteria in a directory.
****************************************************************************/
void *PMAPI PM_findFirstFile(
    const char *filename,
    PM_findData *findData)
{
    /* TODO: This function should start a directory enumeration search */
    /*       given the filename (with wildcards). The data should be */
    /*       converted and returned in the findData standard form. */
    (void)filename;
    (void)findData;
    return PM_FILE_INVALID;
}

/****************************************************************************
REMARKS:
Function to find the next file matching a search criteria in a directory.
****************************************************************************/
ibool PMAPI PM_findNextFile(
    void *handle,
    PM_findData *findData)
{
    /* TODO: This function should find the next file in directory enumeration */
    /*       search given the search criteria defined in the call to */
    /*       PM_findFirstFile. The data should be converted and returned */
    /*       in the findData standard form. */
    (void)handle;
    (void)findData;
    return false;
}

/****************************************************************************
REMARKS:
Function to close the find process
****************************************************************************/
void PMAPI PM_findClose(
    void *handle)
{
    /* TODO: This function should close the find process. This may do */
    /*       nothing for some OS'es. */
    (void)handle;
}

/****************************************************************************
REMARKS:
Function to determine if a drive is a valid drive or not. Under Unix this
function will return false for anything except a value of 3 (considered
the root drive, and equivalent to C: for non-Unix systems). The drive
numbering is:

    1   - Drive A:
    2   - Drive B:
    3   - Drive C:
    etc

****************************************************************************/
ibool PMAPI PM_driveValid(
    char drive)
{
    if (drive == 3)
	return true;
    return false;
}

/****************************************************************************
REMARKS:
Function to get the current working directory for the specififed drive.
Under Unix this will always return the current working directory regardless
of what the value of 'drive' is.
****************************************************************************/
void PMAPI PM_getdcwd(
    int drive,
    char *dir,
    int len)
{
    (void)drive;
    getcwd(dir,len);
}

/****************************************************************************
REMARKS:
Function to change the file attributes for a specific file.
****************************************************************************/
void PMAPI PM_setFileAttr(
    const char *filename,
    uint attrib)
{
    /* TODO: Set the file attributes for a file */
    (void)filename;
    (void)attrib;
}

/****************************************************************************
REMARKS:
Function to create a directory.
****************************************************************************/
ibool PMAPI PM_mkdir(
    const char *filename)
{
    return mkdir(filename) == 0;
}

/****************************************************************************
REMARKS:
Function to remove a directory.
****************************************************************************/
ibool PMAPI PM_rmdir(
    const char *filename)
{
    return rmdir(filename) == 0;
}