fcssoft.plg

来自「LPC2129实现从SPI通讯和两个串口定时器中断」· PLG 代码 · 共 141 行

PLG
141 行
字号 
<html>
<body>
<pre>
<h1>礦ision3 Build Log</h1>
<h2>Project:</h2>
F:\6-嵌入式\7-LPC\proc\lpc2129\从SPItwo串口定时器中断2\VoyagerAC\FCSSOFT.uv2
Project File Date:  03/19/2009

<h2>Output:</h2>
compiling spi.c...
LPCAPI\spi.c(47): error:  #20: identifier "RXD_BUF" is undefined
LPCAPI\spi.c - 1 Error(s), 0 Warning(s).
compiling spi.c...
LPCAPI\spi.c - 0 Error(s), 0 Warning(s).
Build target 'Debug in FLASH'
compiling timer0.c...
compiling UART1.C...
LPCAPI\UART1.C(86): warning:  #550-D: variable "receiv" was set but never used
LPCAPI\UART1.C(189): warning:  #1-D: last line of file ends without a newline
compiling com_trans.c...
linking...
FCSSOFT.axf: Warning: L3910W: Old syntax, please use '--entry'.
User command #1: fromelf.exe debug_in_RAM\Project.axf -c -output debug_in_RAM\Project.hex -i32
"FCSSOFT.axf" - 0 Error(s), 3 Warning(s).
compiling UART1.C...
LPCAPI\UART1.C(92): warning:  #223-D: function "rx_cmd_deal" declared implicitly
LPCAPI\UART1.C(190): warning:  #1-D: last line of file ends without a newline
LPCAPI\UART1.C - 0 Error(s), 2 Warning(s).
compiling UART1.C...
LPCAPI\UART1.C(94): error:  #165: too few arguments in function call
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
LPCAPI\UART1.C - 1 Error(s), 1 Warning(s).
compiling UART1.C...
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
LPCAPI\UART1.C - 0 Error(s), 1 Warning(s).
Build target 'Debug in FLASH'
linking...
FCSSOFT.axf: Warning: L3910W: Old syntax, please use '--entry'.
User command #1: fromelf.exe debug_in_RAM\Project.axf -c -output debug_in_RAM\Project.hex -i32
"FCSSOFT.axf" - 0 Error(s), 1 Warning(s).
Build target 'Debug in FLASH'
assembling Startup.s...
assembling HEAP.S...
assembling IRQ.s...
assembling STACK.S...
compiling target.c...
compiling main.c...
User\main.c(32): warning:  #175-D: subscript out of range
User\main.c(33): warning:  #175-D: subscript out of range
User\main.c(34): warning:  #175-D: subscript out of range
User\main.c(35): warning:  #175-D: subscript out of range
User\main.c(68): warning:  #111-D: statement is unreachable
User\main.c(21): warning:  #177-D: variable "rcvdata" was declared but never referenced
compiling timer0.c...
compiling led.c...
compiling UART1.C...
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
compiling UART0.C...
compiling spi.c...
compiling com_trans.c...
linking...
FCSSOFT.axf: Warning: L3910W: Old syntax, please use '--entry'.
User command #1: fromelf.exe debug_in_RAM\Project.axf -c -output debug_in_RAM\Project.hex -i32
"FCSSOFT.axf" - 0 Error(s), 8 Warning(s).
Build target 'Debug in FLASH'
compiling main.c...
User\main.c(68): warning:  #111-D: statement is unreachable
compiling spi.c...
compiling com_trans.c...
linking...
FCSSOFT.axf: Warning: L3910W: Old syntax, please use '--entry'.
User command #1: fromelf.exe debug_in_RAM\Project.axf -c -output debug_in_RAM\Project.hex -i32
"FCSSOFT.axf" - 0 Error(s), 2 Warning(s).
Build target 'Debug in FLASH'
assembling Startup.s...
assembling HEAP.S...
assembling IRQ.s...
assembling STACK.S...
compiling target.c...
compiling main.c...
User\main.c(68): warning:  #111-D: statement is unreachable
compiling timer0.c...
compiling led.c...
compiling UART1.C...
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
compiling UART0.C...
compiling spi.c...
compiling com_trans.c...
linking...
FCSSOFT.axf: Warning: L3910W: Old syntax, please use '--entry'.
User command #1: fromelf.exe debug_in_RAM\Project.axf -c -output debug_in_RAM\Project.hex -i32
"FCSSOFT.axf" - 0 Error(s), 3 Warning(s).
Load "F:\\6-嵌入式\\7-LPC\\proc\\lpc2129\\从SPItwo串口定时器中断2\\VoyagerAC\\FCSSOFT.AXF" 
Erase Done.
Programming Done.
Verify OK.
compiling UART1.C...
LPCAPI\UART1.C(95): error:  #29: expected an expression
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
LPCAPI\UART1.C - 1 Error(s), 1 Warning(s).
Build target 'Debug in FLASH'
compiling UART1.C...
LPCAPI\UART1.C(95): error:  #29: expected an expression
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
Target not created
compiling UART1.C...
LPCAPI\UART1.C(95): error:  #29: expected an expression
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
LPCAPI\UART1.C - 1 Error(s), 1 Warning(s).
compiling UART1.C...
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
LPCAPI\UART1.C - 0 Error(s), 1 Warning(s).
Build target 'Debug in FLASH'
linking...
FCSSOFT.axf: Warning: L3910W: Old syntax, please use '--entry'.
User command #1: fromelf.exe debug_in_RAM\Project.axf -c -output debug_in_RAM\Project.hex -i32
"FCSSOFT.axf" - 0 Error(s), 1 Warning(s).
Build target 'Debug in FLASH'
assembling Startup.s...
assembling HEAP.S...
assembling IRQ.s...
assembling STACK.S...
compiling target.c...
compiling main.c...
User\main.c(68): warning:  #111-D: statement is unreachable
compiling timer0.c...
compiling led.c...
compiling UART1.C...
LPCAPI\UART1.C(192): warning:  #1-D: last line of file ends without a newline
compiling UART0.C...
compiling spi.c...
compiling com_trans.c...
linking...
FCSSOFT.axf: Warning: L3910W: Old syntax, please use '--entry'.
User command #1: fromelf.exe debug_in_RAM\Project.axf -c -output debug_in_RAM\Project.hex -i32
"FCSSOFT.axf" - 0 Error(s), 3 Warning(s).
Load "F:\\6-嵌入式\\7-LPC\\proc\\lpc2129\\从SPItwo串口定时器中断2\\VoyagerAC\\FCSSOFT.AXF" 
Erase Done.
Programming Done.
Verify OK.

fcssoft.plg - 源码说明

本页面展示了「LPC2129实现从SPI通讯和两个串口定时器中断」中的 fcssoft.plg 源码文件，采用 PLG 编程语言编写，共 141 行代码。您可以在线阅读完整代码内容，也可以返回资源详情页下载完整源码包进行本地学习和开发。

虫虫下载站收录了大量与2129相关的技术资源，包括源代码、技术文档、电路图等，是电子工程师和嵌入式开发者的专业学习平台。

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?